电弧增材制造技术研究现状及展望

doi:10.11896/cldb.20110244

Abstract
Figure/Table
References
Related Citation (5)

Download:

Full Text ( PDF ) (10580KB)
Export: BibTeX | EndNote (RIS)

Abstract The wire and arc additive manufacture is widely used in aerospace and aeronautic, shipbuilding, automobile industry and other fields, due to the advantages of fast forming speed, high material utilization rate and low production cost. Firstly, the development status of the quality control for wire arc additive manufacture technology was introduced, including processing parameters, the temperature of the substrate and interlayer and shielding gas. Secondly, the development of the deposition paths was discussed by combining with the latest research at home and abroad, and the mechanics, fatigue, and corrosion properties of the formed parts were analyzed. Meanwhile, the typical applications of the wire arc additive ma-nufacture technology in the manufacture of large-scale and integrated parts were presented. Finally, the major challenges faced by the wire arc additive manufacture technology were summarized, such as the immature parameter dynamic monitoring technology, insufficient forming process optimization, inadequate standard formulation, and deficient fatigue and corrosion mechanism research. The suggestions were put forward for the future development trend of the wire arc additive manufacture technology, such as the establishment of the parameter control database, the development of the new materials, the establishment of the process database, and the perfection of the software and hardware system.

Key words： wire and arc additive manufacture properties control deposition path performance evaluation typical application

Published: 10 December 2021 Online: 2021-12-23

CLC number:

TG441

Fund:National Key Research and Development Project of China (2018YFB1105800)

Corresponding Authors: kaolawwy@qq.com

About author: Gen Tian received his B.S. degree in military materials engineering from Army Academy of Armored Forces in 2014. He is currently pursuing his MFA at the National Key Laboratory for Remanufacturing, Army Academy of Armored Forces under the supervision of Prof. Sheng Zhu. His research has focused on low carbon steel wire and arc additive manufacture.
Wenyu Wang, graduated from Beijing University of Chemical Technology in 2010 with a master's degree in engineering. Internship researcher, National Key Laboratory for Remanufacturing, Army Academy of Armored Forces, mainly engaged in the research work in the field of additive remanufacturing.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TIAN Gen
	WANG Wenyu
	CHANG Qing
	REN Zhiqiang
	WANG Xiaoming
	ZHU Sheng

Cite this article:

TIAN Gen,WANG Wenyu,CHANG Qing, et al. Research Progress and Prospect of Wire and Arc Additive Manufacture[J]. Materials Reports, 2021, 35(23): 23131-23141.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110244 OR http://www.mater-rep.com/EN/Y2021/V35/I23/23131

1 Roy R, Stark R, Tracht K, et al. The International Academy for Production Engineering Annals-Manufacturing Technology, 2016, 65, 667.
2 Anant P P, Kumar H. Materials Today: Proceedings, 2020, 21, 1689.
3 Chaudhary V, Yadav N M S K K, Mantri S A, et al. Journal of Alloys and Compounds,2020, 823, 153817.
4 Ayarkwa K F, Williams S, Ding J. International Journal of Rapid Manufacturing, 2015, 5(1), 44.
5 Tian Y B, Shen J Q,Hu S S, et al. Acta Metallurgica Sinica, 2019, 55(11),1407 (in Chinese).
田银宝, 申俊琦, 胡绳荪,等.金属学报, 2019, 55(11), 1407.
6 Li J Z, Alkahari M R, Rosli N A B, et al. International Journal of Automation Technology, 2019, 13(3), 346.
7 Huang J, Xu W H, Liu J, et al. Hot Working Technology, 2020, 49(5), 49 (in Chinese).
黄俊, 徐望辉, 刘静, 等.热加工工艺, 2020, 49(5), 49.
8 Xu F, Dhokia V, Colegrove P, et al. International Journal of Computer Integrated Manufacturing, 2018, 31(8), 785.
9 Liu J, Xu Y, Ge Y, et al. The International Journal of Advanced Manufacturing Technology, 2020, 111(1-2), 149.
10 Vimal K E K, Naveen S M, Rajak S. Materials Today: Proceedings, 2020,9,153.
11 Davis A E, Caballero A, Prangnell P B. Materialia,2020, 13, 100857.
12 Dirisu P, Supriyo G, Martina F, et al. International Journal of Fatigue,2020, 130, 105237.
13 Seow C E, Zhang J, Coules H E, et al. Additive Manufacturing, 2020, 36, 101578.
14 Xia C, Pan Z, Polden J, et al. Journal of Manufacturing Systems, 2020, 57, 31.
15 Asala G, Aandersson J, Ojo O A. Corrosion Science, 2019, 158, 108086.
16 Zhang L N, Ojo O A. Journal of Alloys and Compounds, 2020, 829, 154455.
17 Hackenhaar W, Mazzaferro J A E, Montevecchi F, et al. Journal of Ma-nufacturing Processes, 2020, 52, 58.
18 Ma Y, Hu Z, Tang Y, et al. Additive Manufacturing, 2020, 31, 100956.
19 Wang J, Lin X, Li J, et al. Materials Science and Engineering: A, 2020, 772, 138703.
20 Xue L, Xiao J, Nie Z, et al. Materials Science and Engineering: A, 2021, 800, 140310.
21 Cai X, Dong B, Yin X, et al. Additive Manufacturing, 2020, 35, 101344.
22 Zhang X Y, Wang K H, Zhou Q, et al. Materials Science and Enginee-ring a-Structural Materials Properties Microstructure and Processing, 2019, 762, 138097.
23 Ge J, Lin J, Chen Y, et al. Journal of Alloys and Compounds, 2018, 748, 911.
24 Davis A E, Breheny C I, Fellowes J, et al. Materials Science and Engineering: A, 2019, 765, 138289.
25 Caballero A, Ding J, Ganguly S, et al. Journal of Materials Processing Technology, 2019, 268, 54.
26 He Z, Hu Y,Qu H T, et al. Aerospace Manufacturing Technology, 2016(6), 11(in Chinese).
何智, 胡洋, 曲宏韬,等.航天制造技术, 2016(6), 11.
27 Hu Z Q, Qin X P, Shao T, et al. The International Journal of Advanced Manufacturing Technology,2018, 95(5-8), 2357.
28 Miller. Guidelines For Gas Metal Arc Welding (GMAW). USA, 2010.
29 Azwan M, Maleque M A, Rahman M M. Transactions of the Institute of Metal Finishing, 2019, 97(1), 12.
30 Liu Z M, Cui S L, Luo Z, et al. Journal of Manufacturing Processes, 2016, 23, 315.
31 Yildiz A S, Davut K, Koc B, et al. The International Journal of Advanced Manufacturing Technology, 2020, 108(11-12), 3391.
32 Liu L X. Study in deposition morphplogy and digital twin simulation of deposition process in wire and arc additive manufacturing. Master's Thesis, University of Sowth China, China, 2020 (in Chinese).
刘理想. 电弧增材制造堆积形貌研究及堆积过程数字孪生模拟. 硕士学位论文,南华大学, 2020.
33 Sun L, Jiang F, Huang R, et al. Journal of Manufacturing Processes, 2020, 56, 898.
34 Martina F, Mehnen J, Williams S W, et al. Journal of Materials Proces-sing Technology, 2012, 212(6), 1377.
35 Dinovitzer M, Chen X, Laliberte J, et al. Additive Manufacturing, 2019, 26, 138.
36 Liu D S, Lyu Y M,Yang H, et al. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(9), 1412 (in Chinese).
刘东帅, 吕彦明, 杨华,等.机械科学与技术, 2020, 39(9), 1412.
37 Wang X L, Wang A M, Li Y B. Journal of Materials Processing Technology, 2020, 282, 116649.
38 Gokhale N P, Kala P, Sharma V, et al. Journal of Mechanical Science and Technology, 2020, 34(2), 701.
39 Han Q L, Gao J, Han C L, et al. Welding in the World, 2021, 65(1), 35.
40 Dong J, Xu Y, Wang L D, et al. Foundry Technology, 2018, 39(8), 1764 (in Chinese).
董杰, 许燕, 王恪典, 等.铸造技术, 2018, 39(8), 1764.
41 Henckell P, Gierth M, Ali Y, et al. Materials, 2020, 13(11), 2491.
42 Qin W M, Wang K H, Ye Y H, et al. Hot Working Technology, 2019, 48(14), 58 (in Chinese).
秦伟铭, 王克鸿, 叶约翰, 等.热加工工艺, 2019, 48(14), 58.
43 Song E J. The research on controlling shape technology of low carbon steel based on MAG wire and arc additive manufacturing. Master's Thesis, Xiangtan University, China,2018 (in Chinese).
宋二军. 低碳钢MAG电弧增材制造控形技术研究. 硕士学位论文, 湘潭大学, 2018.
44 Zhang W M, Zhou X. Practical Electronics, 2017, 19, 59(in Chinese).
张文明, 周旭.电子制作, 2017, 19, 59.
45 Huang D, Zhu Z H, Geng H B, et al. Cailiao Gongcheng, 2017, 45(3), 66.
46 Xiong J, Lei Y, Li R. Applied Thermal Engineering, 2017, 126, 43.
47 Bai X W, Colegrove P, Ding J L, et al. International Journal of Heat and Mass Transfer, 2018, 124, 504.
48 Kozamernik N, Bracun D, Klobcar D. The International Journal of Advanced Manufacturing Technology, 2020, 110(7), 1955.
49 Ogino Y, Asai S, Hirata Y. Welding in the World, 2018, 62(2), 393.
50 Lei Y Y, Xiong J, Li R. The International Journal of Advanced Manufacturing Technology, 2018, 96(1-4), 1355.
51 Anis M, Derekar K, Lawrence J, et al. Matec Web of Conferences, 2019, 269, 5001.
52 Duang M W,Peng Y, Zhou Q, et al. Transactions of the China Welding Institution, 2018, 39(9), 113(in Chinese).
段梦伟, 彭勇, 周琦, 等.焊接学报, 2018, 39(9), 113.
53 Reisgen U, Sharma R, Mann S, et al. Welding in the World, 2020, 64(8), 1409.
54 Rodrigues T A, Duarte V, Miranda R M, et al. Materials, 2019, 12(7), 41.
55 Zhou Y J. Guangzhou Shipyard International Shipbuilding Technology, 2000(3), 20(in Chinese).
周业基.广船科技, 2000(3), 20.
56 Kah P, Salminen A, Martikainen J. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2011, 225(B7), 1073.
57 Jia S J. Machinist Metal Forming, 2014(6), 26(in Chinese).
贾时君.金属加工(热加工), 2014(6), 26.
58 Juric I, Garasic I, Busic M, et al. JOM, 2018, 71(2), 703.
59 Da Y L, Dong Q Y, Xiang L, et al. Journal of Materials Processing Technology, 2018, 259, 116.
60 Ding J, Colegrove P, Martina F, et al. Journal of Materials Processing Technology, 2015, 226, 99.
61 Mvola B, Kah P. The International Journal of Advanced Manufacturing Technology, 2017, 88(9-12), 2369.
62 Liu X J, Chen W. Journal of Netshape Forming Engineering, 2019, 11(3), 66(in Chinese).
刘小军, 陈伟.精密成形工程, 2019, 11(3), 66.
63 Ma G C, Zhao G, Li Z H, et al. The International Journal of Advanced Manufacturing Technology, 2019, 101(5-8), 1275.
64 Huang J, Guan Z, Yu S, et al. Materials Today Communications, 2020, 24, 101255.
65 Mehnen J, Ding J, Lockett H, et al. International Journal of Product Development, 2014, 19(1), 2.
66 Venturini G, Montevecchi F, Scippa A, et al. The International Academy for Production Engineering, 2016, 55, 95.
67 Zhang C, Shen C, Hua X M, et al. The International Journal of Advanced Manufacturing Technology, 2020, 111(3-4), 797.
68 Xiong Y, Park S I, Padmanathan S, et al. The International Journal of Advanced Manufacturing Technology, 2019, 105(10), 4159.
69 Mehnen J, Ding J, Lockett H, et al. Global Product Development. 2011,73, 721.
70 Zhao Y, Jia Y Z, Chen S J, et al. Additive Manufacturing, 2020, 32, 100935.
71 Lockett H, Ding J, Williams S, et al. Journal of Engineering Design, 2017, 28(7-9), 568.
72 Dong H D, Ze X P, Cuiuri D, et al.In: Proceedings of the 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA), IEEE, 2015, pp. 2000.
73 Yuan L, Ding D H, Pan Z X, et al. Ieee Transactions on Industrial Informatics, 2020, 16(1), 454.
74 Jin W W, Zhang C Q, Jin S Y, et al. Applied Sciences-Basel, 2020, 10(5), 28.
75 Dai Y L, Yu S F, Huang A G, et al. International Journal of Minerals, Metallurgy and Materials, 2020, 27(7), 933.
76 Chandrasekaran S, Hari S, Amirthalingam M. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2020, 792(13), 139530.
77 Bhujangrao T, Veiga F, Suarez A, et al. Crystals, 2020, 10(8), 13.
78 Bambach M, Sizova I, Sydow B, et al. Journal of Materials Processing Technology, 2020, 282(8), 116689.
79 Wang S, Gu H M. Rare Metal Materials and Engineering, 2019, 48(9), 2910 (in Chinese).
王帅, 顾惠敏.稀有金属材料与工程, 2019, 48(9), 2910.
80 Wachter M, Leicher M, Hupka M, et al. Applied Sciences-Basel, 2020, 10(15), 22.
81 Xie Y, Gao M, Wang F, et al. Materials Science and Engineering: A, 2018, 709, 265.
82 Zhang J K, Wang X Y, Paddea S, et al. Materials & Design, 2016, 90, 551.
83 Zhang J K, Zhang X, Wang X Y, et al. Materials & Design, 2016, 104, 365.
84 Ron T, Levy G K, Dolev O, et al. Metals, 2020, 10(1), 98.
85 Rajesh Kannan A, Mohan K S, Pravin K N,et al. Materials Letters, 2020, 274, 127968.
86 Fatemi A, Molaei R, Phan N. International Journal of Fatigue, 2020, 134, 105479.
87 Yang J, Yang H, Yu H, et al. Metallurgical and Materials Transactions A, 2017, 48(7), 3583.
88 Wu B, Pan Z, Li S, et al. Corrosion Science, 2018, 137, 176.
89 Chen X, Li J, Cheng X, et al. Materials Science and Engineering: A, 2018, 715, 307.
90 Rajesh K A, Siva S N, Rajkumar V, et al. Materials Letters, 2020, 270, 127680.
91 Abe T, Sasahara H. Additive Manufacturing, 2019, 28, 639.
92 Zhang H R, Huang J J, Liu C M, et al. Materials, 2020, 13(16), 13.
93 Gradl P R, Protz C S. Acta Astronaut, 2020, 174, 148.
94 Oropeza D, Hofmann D C, Williams K, et al. Journal of Alloys and Compounds, 2020, 834, 8.
95 He T, Yu S, Shi Y, et al. Journal of Manufacturing Processes, 2020, 52, 96.
96 Nemani A V, Ghaffari M, Nasiri A. Additive Manufacturing, 2020, 32, 101086.
97 Tasdemir A, Nohut S. Ships Offshore Struct, 2020, 1, 18.
98 Queguineur A, Marolleau J, Lavergne A, et al. Welding in the World, 2020, 64(8), 1389.
99 Thapliyal S. Materials Research Express, 2019, 6(11), 112006.