植物纤维增强复合材料的湿热老化研究进展

doi:10.11896/cldb.20100169

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5066KB)
Export: BibTeX | EndNote (RIS)

Abstract Plant fibers are widely used as a reinforcing material in the aerospace, automobile, and rail transit industries. They afford advantages over alternative materials, including high specific strength and modulus properties, wide range of sources, lower costs and higher biodegradability.
However, their use is limited in main load-bearing structure applications owing to their weak interface and easy water absorption characteristics. This is especially true in hydrothermal environments where the mechanical properties are rapidly weakened by hydrothermal aging. Compared to traditional fibers, plant fibers have unique hierarchical and multiscale structures and inherent hydrophilic chemical compositions, which make the aging mechanism of their composites more complex.
In recent years, the aging mechanisms of plant fibers have been studied according to their internal micro morphology. The microstructure and chemical variations of plant fibers play a major role in the aging behavior of composites under hydrothermal conditions. Firstly, water molecules enter the lumen of the plant fiber and combine with cellulose, resulting in fiber swelling. Microcracks then form at the interface between the fiber and matrix. The plant fiber degrades and leaches products including pectin and hemicellulose, and significant debonding of the interface between the fiber and matrix occurs. This weakens the mechanical properties and reduces the performance of the plant fiber. Various aging prediction models have been proposed in previous studies to predict the aging properties of plant fiber reinforced composites; however, further research is still required.
This paper summarizes research progress on the hydrothermal aging of plant fiber reinforced composites and is separated into three parts. First, the aging mechanism of plant fiber, resin matrix and reinforced composites under hydrothermal aging environments is outlined. The influence of hydrothermal aging on the mechanical properties and the aging prediction model of plant fiber reinforced composites are discussed. Finally, this paper provides a summary of the research to date on the hygrothermal aging of plant fiber reinforced composites, and also a prospective discussion about the future development trend of this subject.

Key words： plant fiber hygrothermal aging mechanical property aging mechanism prediction model

Published: 10 March 2022 Online: 2022-03-08

CLC number:

TB332

Fund:National Natural Science Foundation of China (51675095),the Central University Director Fund: Key Laboratory of High Performance Fibers & Products, Ministry of Education (2232021G-02).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Xian
	CAI Ming
	SUN Baozhong

Cite this article:

ZHANG Xian,CAI Ming,SUN Baozhong. Research Progress of Hygrothermal Aging of Plant Fiber Reinforced Composites[J]. Materials Reports, 2022, 36(5): 20100169-11.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20100169 OR http://www.mater-rep.com/EN/Y2022/V36/I5/20100169

1 Sanjay M R, Madhu P, Jawaid M, et al. Journal of Cleaner Production, 2018, 172, 566.
2 Rajak D K, Pagar D D, Kumar R, et al. Journal of Materials Research and Technology, 2019, 8(6), 6354.
3 Corbière-Nicollier T, Laban BG, Lundquist L, et al.Resources, Conservation and Recycling, 2001, 33(4), 267.
4 Li Y, Mai Y W, Ye L. Composites Science and Technology, 2000, 60(11), 2037.
5 Bledzki A K, Gassan J. Progress in Polymer Science,1999,24(2),221.
6 Santoni A, Bonfiglio P, Fausti P, et al.Applied Acoustics, 2019, 150, 279.
7 Liu K, Takagi H, Osugi R, et al.Composites Science and Technology, 2012, 72(5), 633.
8 Mahmoudi S, Kervoelen A, Robin G, et al.Composite Structures, 2019, 208, 426.
9 Bogoeva-Gaceva G, Avella M, Buzarovska A, et al.Polymer Composites, 2007, 28, 98.
10 Mittal V, Saini R, Sinha S.Composites Part B: Engineering, 2016, 99, 425.
11 Karthi N, Kumaresan K, Sathish S, et al.Materials Today: Proceedings, 2020, 27, 2828.
12 Li Y, Li Q. Acta Mechanica Solida Sinica, 2017, 38(3), 215(in Chinese).
李岩, 李倩. 固体力学学报, 2017, 38(3), 215.
13 Silva G, Kim S, Aguilar R, et al.Sustainable Materials and Technologies, 2020, 23, e00132.
14 Sreenivas H T, Krishnamurthy N, Arpitha G R.International Journal of Lightweight Materials and Manufacture, 2020, 3(4), 328.
15 Jiang B T, Wang Q, Zhang Y, et al.Chinese Agricultural Science Bulletin, 2019, 35(23), 35(in Chinese).
姜弼天, 王琪, 张炎, 等. 中国农学通报, 2019, 35(23), 35.
16 Zhang D J, Liu G, Bao J W, et al.Acta Materiae Compositae Sinica, 2016, 33(7), 1390(in Chinese).
张代军, 刘刚, 包建文, 等. 复合材料学报, 2016, 33(7), 1390.
17 Gao K, Shi H Q, Sun B G, et al.Acta Materiae Compositae Sinica, 2016, 33(6), 1147(in Chinese).
高坤, 史汉桥, 孙宝岗, 等. 复合材料学报, 2016, 33(6), 1147.
18 Leveque D, Schieffer A, Mavel A, et al.Composites Science and Techno-logy, 2005, 65(3-4), 395.
19 Wang W L, Ji D Y, Chen C L.Fiber Composites, 2019, 36(1), 35(in Chinese).
王威力, 纪丹阳, 陈春露. 纤维复合材料, 2019, 36(1), 35.
20 Mokhothu TH, John MJ.Carbohydr Polym, 2015, 131, 337.
21 Wang Y Y, Liu J, Meng J Y, et al.Journal of Materials Engineering, 2011(7), 85(in Chinese).
王云英, 刘杰, 孟江燕, 等. 材料工程, 2011(7), 85.
22 Dungani R, Aditiawati P, Islam M N, et al.Durability and life prediction in biocomposites, fibre-reinforced composites and hybrid composites, Woodhead Publishing, UK, 2019, pp. 173.
23 Lv X J, Zhang Q, Ma Z Q, et al.Journal of Materials Engineering, 2005(11), 50(in Chinese).
吕小军, 张琦, 马兆庆, 等. 材料工程, 2005(11), 50.
24 Kang H, Liu R, Huang Y.Polymer, 2015, 70, A1.
25 John M, Thomas S.Carbohydrate Polymers, 2008, 71(3), 343.
26 Li Y, Luo Y.Acta Mechanica Solida Sinica, 2010, 31(6), 613(in Chinese).
李岩, 罗业. 固体力学学报, 2010, 31(6), 613.
27 Faruk O, K.Bledzki A, Fink H P, et al.Progress in Polymer Science, 2012, 37(11), 1552.
28 Jauhari N, Mishra R, Thakur H.Materials Today: Proceedings, 2015, 2(4-5), 2868.
29 Ramesh M, Palanikumar K, Reddy K H.Renewable and Sustainable Energy Reviews, 2017, 79, 558.
30 Sarasini F, Fiore V.Journal of Cleaner Production, 2018, 195, 240.
31 Thakur V K, Thakur M K.Carbohydrate Polymers, 2014, 109, 102.
32 Pei J C, Ping Q W, Tang A M, et al.Plant fiber chemistry, Chemical Industry Press, China,2012, pp. 265(in Chinese).
裴继诚, 平清伟, 唐爱民, 等. 植物纤维化学, 化学工业出版社, 2012, pp. 265.
33 Xie K Y, Li H, Sun Y, et al.Materials for Mechanical Engineering, 2014, 38(8), 1(in Chinese).
谢可勇, 李晖, 孙岩, 等. 机械工程材料, 2014, 38(8), 1.
34 Assarar M, Scida D, El Mahi A, et al.Materials & Design, 2011, 32(2), 788.
35 Lee K Y, Bismarck A.Interface engineering of natural fibre composites for maximum performance, Woodhead Publishing, UK, 2011, pp. 275.
36 Scida D, Assarar M, Poilane C, et al.Composites Part B: Engineering, 2013, 48, 51.
37 Regazzi A, Corn S, Ienny P, et al.Polymer Degradation & Stability, 2016, 130, 300.
38 Berges M, Léger R, Placet V, et al.Composites Part A: Applied Science and Manufacturing, 2016, 88, 165.
39 Espert A, Vilaplana F, Karlsson S.Composites Part A: Applied Science and Manufacturing, 2004, 35(11), 1267.
40 Maslinda A B, Abdul Ma M S, Ridzuan M J M, et al. Composite Structures, 2017, 167, 227.
41 Xue B, Zhang T N.Fiber Composites, 2018, 35(2), 7(in Chinese).
薛冰, 张铁男. 纤维复合材料, 2018, 35(2), 7.
42 Badia J D, Santonja-Blasco L, Martínez-Felipe A, et al. Polymer Degradation and Stability, 2012, 97(10), 1881.
43 Proikakis C S, Mamouzelos N J, Tarantili P A, et al. Polymer Degradation and Stability, 2006, 91(3), 614.
44 Lv X Y, Jiang L, Yan L, et al.Fiber Reinforced Plastics/Composites, 2009(3), 76(in Chinese).
吕新颖, 江龙, 闫亮, 等. 玻璃钢/复合材料, 2009(3), 76.
45 Shi Z Q.Aerospace Materials and Technology, 2008(5), 1(in Chinese).
石增强. 宇航材料工艺, 2008(5), 1.
46 Chen Y L, Liu X.Equipment Environmental Engineering, 2010, 7(4), 49(in Chinese).
陈跃良, 刘旭. 装备环境工程, 2010, 7(4), 49.
47 Gibson R F. Principles of composite material mechanics, CRC Press, USA, 2012.
48 Jin F L, Li X, Park S J. Journal of Industrial and Engineering Chemistry, 2015, 29, 1.
49 Huang Z X.Thermosetting resin composites and their applications, Chemical industry press, China, 2006, pp. 156(in Chinese).
黄志雄. 热固性树脂复合材料及其应用, 化学工业出版社, 2006, pp. 156.
50 Yi X S, Du S Y, Zhang L T.Composite handbook, Chemical industry press, China, 2009, pp. 224(in Chinese).
益小苏, 杜善义, 张立同. 复合材料手册, 化学工业出版社, 2009, pp. 224.
51 Hakkarainen M, Albertsson A C, Karlsson S.Polymer Degradation and Stability, 1996, 52(3), 283.
52 Joseph P V, Rabello M S, Mattoso L H C, et al.Composites Science and Technology, 2002, 62, 1357.
53 Cheour K, Assarar M, Scida D, et al.Composite Structures, 2016, 152, 259.
54 Dhakal H, Zhang Z, Richardson M.Composites Science and Technology, 2006, 67(7-8), 1674.
55 Hachem Z E, Célino A, Challita G, et al. Industrial Crops & Products, 2019, 140, 111634.
56 Azwa Z N, Yousif B F, Manalo A C, et al.Materials & Design, 2013, 47, 424.20100169-20100169-
57 Chilali A, Assarar M, Zouari W, et al.Composite Structures, 2018, 206, 177.
58 Li Y, Xue B.Polymer Degradation and Stability, 2016, 126, 144.
59 Regazzi A, Corn S, Ienny P, et al.Industrial Crops & Products, 2016, 84, 358.
60 Hu R H, Sun M Y, Lim J K. Materials & Design, 2010, 31(7), 3167.
61 Wang X, Petru。 M.Construction and Building Materials, 2020, 240, 117909.
62 Guo B C, Fu W W, Jia D M, et al.Acta Materiae Compositae Sinica, 2002(3), 6(in Chinese).
郭宝春, 傅伟文, 贾德民, 等. 复合材料学报, 2002(3), 6.
63 Zhang D, Milanovic N R, Zhang Y, et al. Composites Part B: Enginee-ring, 2014, 60, 186.
64 Habibi M, Laperrière L, Hassanabadi H M. Composites Part B: Engineering, 2019, 166, 31.
65 Chen X, Yin P, Xian G J, et al.Journal of Aeronautical Materials, 2013, 33(2), 58(in Chinese).
陈旭, 尹鹏, 咸贵军, 等. 航空材料学报, 2013, 33(2), 58.
66 Jeannin T, Berges M, Gabrion X, et al.Composites Part B: Engineering, 2019, 174, 107056.
67 Mejri M, Toubal L, Cuillière J C, et al.International Journal of Fatigue, 2018, 108, 96.
68 Johnson M, Walter S L, Flinn B D, et al.Acta Biomater, 2010, 6(6), 2181.
69 Han Y Z, Li J, Zhang D P, et al.Acta Materiae Compositae Sinica, 2020, 37(7), 1531(in Chinese).
韩耀璋, 李进, 张佃平, 等. 复合材料学报, 2020, 37(7), 1531.
70 Le Duigou A, Davies P, Baley C.Composites Part A: Applied Science and Manufacturing, 2013, 48, 121.
71 Prasad V, Joseph MA, Sekar K.Composites Part A: Applied Science and Manufacturing, 2018, 115, 360.
72 Wang B, Li L.Chinese Plastics, 2013, 27(2), 14(in Chinese).
王冰, 李玲. 中国塑料, 2013, 27(2), 14.
73 Wen B Y, Li X Y, Zhang Y.Acta Materiae Compositae Sinica, 2015, 32(1), 54(in Chinese).
温变英, 李晓媛, 张扬. 复合材料学报, 2015, 32(1), 54.
74 Le Duigou A, Bourmaud A, Davies P, et al.Ocean Engineering, 2014, 90, 140.
75 Le Duigou A, Bourmaud A, Baley C.Industrial Crops and Products, 2015, 70, 204.
76 Davies P, Choqueuse D, Centre I B. In:12-ageing of composites in marine vessels, Woodhead Publishing, UK, 2008, pp. 326.
77 Hou R L, He C X, Xue J, et al.Acta Materiae Compositae Sinica, 2013, 30(5), 86(in Chinese).
侯人鸾, 何春霞, 薛娇, 等. 复合材料学报, 2013, 30(5), 86.
78 Kabir M M, Wang H, Lau K T, et al. Composites Part B: Engineering, 2012, 43(7), 2883.
79 Abdelmouleh M, Boufi S, Belgacem M, et al.Composites Science and Technology, 2007, 67(7-8), 1627.
80 Ma H L,Chen J,Kong Z W. Biomass Chemical Engineering, 2019, 53(4), 50(in Chinese).
马红亮, 陈健, 孔振武. 生物质化学工程, 2019, 53(4), 50.
81 Ma Y F, Zhang W, Wang C P, et al.Materials Reports A:Review Papers, 2011, 25(10), 81(in Chinese).
马玉峰, 张伟, 王春鹏, 等. 材料导报:综述篇, 2011, 25(10), 81.
82 El-Abbassi F E, Assarar M, Ayad R, et al. Composite Structures, 2015, 133, 451.
83 Gao C, Li M, Wang J, et al.Acta Materiae Compositae Sinica, 2013, 30(5), 21(in Chinese).
高聪, 李敏, 王娟, 等. 复合材料学报, 2013, 30(5), 21.
84 Tanobe V O A, Flores-Sahagun T H S, Amico S C, et al. Defence Science Journal, 2014, 64(3), 273.
85 Zhao W J, Hu Q X, Yan W L, et al.Acta Materiae Compositae Sinica, 2018, 35(1), 35(in Chinese).
赵文杰, 胡求学, 闫雯玲, 等. 复合材料学报, 2018, 35(1), 35.
86 Ventura H, Claramunt J, Rodrguez-Pérez M A, et al.Polymer Degradation & Stability, 2017, 142, 129.
87 Sreekala M S, Thomas S.Composites Science and Technology, 2003, 63(6), 861.
88 Karbhari V M, Abanilla M A.Composites Part B: Engineering, 2007, 38(1), 10.
89 Abanilla M A, Li Y, Karbhari V M.Composites Part B: Engineering, 2005, 37(2-3), 200.
90 Tan W, Na J X, Ren J M, et al.Acta Materiae Compositae Sinica, 2020, 37(4), 859(in Chinese).
谭伟, 那景新, 任俊铭, 等. 复合材料学报, 2020, 37(4), 859.
91 Niu Y F, Li Z Q, Zhu X F.Acta Materiae Compositae Sinica, 2020, 37(1), 104(in Chinese).
牛一凡, 李璋琪, 朱晓峰. 复合材料学报, 2020, 37(1), 104.
92 Sun B,Li Y. Fiber Reinforced Plastics/Composites, 2013(4), 29(in Chinese).
孙博, 李岩. 玻璃钢/复合材料, 2013(4), 29.
93 Ferry J D, Jr W C C, Zand R, et al.Journal of Colloid Science, 1957, 12(1), 53.
94 Ibarra L, Paños D.Journal of Applied Polymer Science, 1998, 67(10), 1819.
95 Ye H J, Zhan M Z.Materials Engineering, 1995(10), 3(in Chinese).
叶宏军,詹美珍. 材料工程, 1995(10), 3.
96 Zhao Y, Liang Z H.Journal of Aeronautical Materials, 2001(2), 55(in Chinese).
肇研, 梁朝虎. 航空材料学报, 2001(2), 55.
97 Zhu K K,Ni A Q,Wang J H. Fiber Reinforced Plastics/Composites, 2016(5), 48(in Chinese).
朱坤坤, 倪爱清, 王继辉. 玻璃钢/复合材料, 2016(5), 48.
98 Tian F, Zhong Z, Pan Y.Composite Structures, 2018, 200, 144.
99 Pan Y, Zhong Z.Composites Science and Technology, 2014, 103, 22.
100 Yu Y, Wu H.Industrial & Engineering Chemistry Research, 2010, 49(8), 3902.
101 Pan Y, Zhong Z.Journal of the Mechanics and Physics of Solids, 2014, 69, 132.
102 Tian F, Zhong Z.Composites Part A: Applied Science and Manufactu-ring, 2019, 125, 105564.
103 Tian F, Pan Y, Zhong Z.Composites Science and Technology, 2017, 142, 156.