利用热处理改善钒钛磁铁矿直接制备的铁基摩擦材料组织与性能

doi:10.11896/cldb.20040031

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4162KB)
Export: BibTeX | EndNote (RIS)

Abstract An iron-based friction material was directly prepared from vanadium-bearing titanomagnetite concentrate by selective carbothermal in-situ reaction and vacuum sintering technology. This study focuses on the effects of quenching and tempering on the material. The results show that the material's microstructure and properties are improved by appropriate quenching and tempering. The microstructure of the material changes from pearlite to martensite by quenching at 900—1 000 ℃. With the increase of quenching temperature, the hardness and tribological properties are enhanced and reach the best by quenching at 950 ℃. Meanwhile, the tribological behavior is ameliorated from severe abrasive and adhesive wear to abrasive wear. Then, 950 ℃ quenched materials were tempered at 250 ℃, 500 ℃ and 650 ℃ respectively. The microstructure changes from martensite to lower-hardness troostite by tempering at 500 ℃, and lowest-hardness sorbate is generated by tempering at 650 ℃. Particularly, secondary hardening in tempering and dissolution of carbides occur by tempering at 500 ℃〗. Therefore, the hardness and tribological properties only get improved when tempering temperature is 500 ℃, and the tribological behavior changes to mild abrasive wear. Consequently, by quenching at 950 ℃ and then tempering at 500 ℃, the microstructure and properties of iron-based friction materials reach the maximum value. The hardness increases by 32%, wear rate decreases by 61% and the friction coefficient decreases by 18%.

Key words： iron-based friction material vanadium-bearing titanomagnetite concentrate quenching tempering friction and wear

Published: 03 August 2021

CLC number:

TB33

Fund:Panzhihua Municipal Science and Technology Project (2017CY-C-1).

About author:: Sitan Chen under post-graduate of Sichuan University since Sep. 2019. He is now engaged in utilization of the vanadium and titanium resource.
Keqin Feng professor of Sichuan University,Ph.D. supervisor. She has been long engaged in metal-ceramic composite materials, comprehensive utilization of vanadium and titanium resources, synthesis and preparation of field assisted materials, physical and chemical pro-perties of materials preparation and metallurgical. She has published more than 140 academic papers in core academic journals, including 53 SCI papers and 82 EI papers.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Sitan
	FENG Keqin
	ZHANG Yanyan
	CAI Yuchen

Cite this article:

CHEN Sitan,FENG Keqin,ZHANG Yanyan, et al. Improvement of the Microstructure and Properties of Iron-based Material Directly Synthesized from Vanadium-bearing Titanomagnetite Concentrate by Heat Treatment[J]. Materials Reports, 2021, 35(14): 14120-14124.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20040031 OR http://www.mater-rep.com/EN/Y2021/V35/I14/14120

1 Zhang Y, Wang X M, Ge Y X, et al. Hot Working Technology, 2014, 43(24), 23(in Chinese).
张宇, 王小美, 葛禹锡, 等. 热加工工艺, 2014, 43(24), 23.
2 Zhao G J, Zhao Q B, Lan J Z, et al. Modern Mining, 2017, 33(7), 198(in Chinese).
赵国君, 赵祺彬, 兰井志, 等. 现代矿业, 2017, 33(7), 198.
3 Li J H, Sun N, Luo J H, et al. Iron Steel Vanadium Titanium, 2016, 37(5), 70(in Chinese).
李俊翰, 孙宁, 罗金华. 钢铁钒钛, 2016, 37(5), 70.
4 Tang T. Panzhihua Sci-Tech & Information, 2016, 41(3), 1(in Chinese).
汤铁. 攀枝花科技与信息, 2016, 41(3), 1.
5 Xue Y Z, Wang X F, Hai J, et al. Natural Resource Economics of China, 2017(4), 9(in Chinese).
薛亚洲, 王雪峰, 海军, 等. 中国国土资源经济, 2017(4), 9.
6 Jayasankar K, Animesh M, Archana P, et al. Materials and Manufactu-ring Processes, 2011, 26(10), 1330.
7 Razieh K, Mansour S, Mohammad A B. International Journal of Refractory Metals ＆ Hard Materials, 2014, 45, 53.
8 Welham N J, Willis P E. Metallurgical and Materials Transactions B, 1998, 29(5), 1077.
9 Welham N J, Williams J S. Metallurgical and Materials Transactions B, 1999, 30(6), 1075.
10 Liu S M, Tang A T, Chen M, et al. Journal of Materials Engineering, 2015, 43(1), 18(in Chinese).
刘胜明, 汤爱涛, 陈敏, 等. 材料工程, 2015, 43(1), 18.
11 Zhang G M, Feng K Q, Yue H F. JOM, 2016, 68(9), 2323.
12 Shui Y, Feng K Q, Yue H F, et al. Journal of Materials Engineering, 2018, 46(9), 73(in Chinese).
税玥, 冯可芹, 岳慧芳, 等. 材料工程, 2018, 46(9), 73.
13 Gong W, Li Z S. Powder Metallurgy Industry, 2010, 20(1), 41(in Chinese).
龚伟, 李自胜. 粉末冶金工业, 2010, 20(1), 41.
14 Li S L, Che Y S, Song J X, et al. Materials(Basel, Switzerland), 2019, 12(19), 3171.
15 Chen G, Chen S, Zhang Y B, et al. Hot Working Technology, 2017, 46(16), 246(in Chinese).
陈刚, 陈珊, 张艳斌, 等. 热加工工艺, 2017, 46(16), 246.
16 Ju J, Fu H G, Lei Y P, et al. In: The Thirteenth National Casting An-nual Meeting & 2016 China Casting Week. Chengdu, China, 2016,pp. 9(in Chinese).
鞠江, 符寒光, 雷永平. 第十三届全国铸造年会暨2016中国铸造活动周. 成都,2016, pp. 9.
17 Deng W L, Feng K Q, Zhang G M, et al. Chinese Journal of Materials Research. 2014, 28(1), 44(in Chinese).
邓伟林,冯可芹,张光明, 等. 材料研究学报, 2014, 28(1), 44.
18 Ren S X. Preparation and properties of Fe-Cu based friction materials for light vehicles. Master's Thesis, Xi'an University of Technology, China, 2019(in Chinese).
任澍忻. 轻型车用Fe-Cu基摩擦材料的制备及性能研究. 硕士学位论文,西安理工大学, 2019.
19 Leng W X, Tian W H, Gao H Y, et al. Rare Metal Materials and Engineering, 2010, 39(S1), 117(in Chinese).
冷文秀, 田文怀, 高红叶, 等. 稀有金属材料与工程, 2010, 39(S1), 117.
20 Han D W, Zhang J X. Metallographic preparation and display technology, Central South University Press, China, 2014(in Chinese).
韩德伟, 张建新. 金相试样制备与显示技术, 中南大学出版社, 2014.
21 Wang X C, Zhang X Y. Modern analysis and testing technology of mate-rials, National Defense Industry Press, China, 2009(in Chinese).
王晓春, 张希艳. 材料现代分析与测试技术, 国防工业出版社, 2009.
22 Tang D, Li W, Li Z C, et al. Transactions of Materials and Heat Treatment, 2014, 35(8), 86(in Chinese).
唐荻, 李维, 李志超, 等. 材料热处理学报, 2014, 35(8), 86.
23 Ding D Q. Metal technology, China Machine Press, China, 2017(in Chinese).
丁德全. 金属工艺学, 机械工业出版社, 2017.
24 Zhang Y L, Jiang F, Liu H, et al. Materials Science and Engineering of Powder Metallurgy, 2014, 19(3), 427(in Chinese).
张雨龙, 姜锋, 刘辉, 等. 粉末冶金材料科学与工程, 2014, 19(3), 427.
25 Du X K, Shi Z L, Ye M H, et al. Tribology, 2001(4), 256(in Chinese).
杜心康, 石宗利, 叶明惠, 等. 摩擦学学报, 2001(4), 256.
26 Chen J, Xiong X, Yao P P, et al. Powder Metallurgy Technology, 2004(4), 223(in Chinese).
陈洁, 熊翔, 姚萍屏, 等. 粉末冶金技术, 2004(4), 223.