增材制造技术制备高熵合金的研究现状及展望

doi:10.11896/cldb.20030074

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6126KB)
Export: BibTeX | EndNote (RIS)

Abstract Since the high entropy alloys were discovered in recent years, they have attracted enormous attention of researchers due to their unique design concept, microstructure and excellent performance. While the high price of high entropy alloys, the application of traditional manufacture cause the waste in prepartion, especially in the preparation of complex parts. Additive manufacturing is a novel technology that directly manufactures solid parts from three-dimensional data of parts, which can largely solve the preparation of high entropy alloys in complex parts. Moreover, the additive manufacturing technology has the characteristics of precise manufacturing and rapid solidification, which can ensure the uniformity of the alloy's structure than the traditional manufacture process, and is also more conducive to the refinement of the alloys' grains. However, the high entropy alloys and additive manufacturing are both new discipline and research on high entropy alloys via additive manufacturing is even on its infancy. This paper introduces the most commonly additive manufacturing technologies for high entropy alloys, focusing on the research on the microstructure evolution laws, mechanical properties, corrosion resistance, and high entropy alloy composite materials in additive manufactu-ring technology. Meanwhile, this paper summarizes the advantages and disadvantages of additive manufacturing high entropy alloys, and provides some references for the study of additive manufacturing technology in high entropy alloys.

Key words： high entropy alloy additive manufacturing solid solution refine grains mechanical properties corrosion resistance

Published: 02 September 2020

CLC number:

TG139

Fund:National Natural Science Foundation of China (51901016), Joint Funds for the Equipment Pre-research Weapon Industry (6141B012808), Fundamental Research Funds for the Central Universities (FRF-TP-18-031A2, FRF-GF-18-024B)

About author:: Minyu Ma received his B.E. degree in material science from Civil Aviation University of China in 2015. He is currently pursuing his Ph.D. at the Institute for Advanced Materials and Technology, University of Science and Technology Beijing under the supervision of Prof. Jin Zhang. His research has focused on the high tempe-rature performance of high entropy alloys by laser technology.
Jin Zhang received her B.S., M.S., and Ph.D. degrees from Chongqing University in 1985, 1988 and 2000, respectively. In 2000, she worked at Chongqing University of Technology, where she founded the College of Materials Science and Engineering. In 2007, she was transferred to the University of Science and Technology Beijing. Now she is the director of the Beijing Key Laboratory for Corrosion Erosion and Surface Technology. She is a director of Chinese Society for Corrosion and Protection, Chinese Mechanical Engineering Society for Surface Engineering and Chinese Committee for Magnesium and its Application.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Minyu
	LIAN Yong
	ZHANG Jin

Cite this article:

MA Minyu,LIAN Yong,ZHANG Jin. Review and Perspective on High Entropy Alloys Prepared by Additive Manufacturing[J]. Materials Reports, 2020, 34(17): 17082-17088.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20030074 OR http://www.mater-rep.com/EN/Y2020/V34/I17/17082

1 Ye Y, Wang Q, Lu J, et al. Materials Today, 2016, 19(6), 349.
2 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299.
3 Ren M, Li B, Fu H. Transactions of Nonferrous Metals Society of China, 2013, 23(4), 991.
4 Zhang Y, Zhou Y J. Materials Science Forum, 2007, 561, 1337.
5 Lei Z, Liu X, Wu Y, et al. Nature, 2018, 563(7732), 546.
6 Yao M, Pradeep K G, Tasan C C, et al. Scripta Materialia, 2014, 72, 5.
7 He J, Wang H, Huang H, et al. Acta Materialia, 2016, 102, 187.
8 Rivera O, Allison P, Jordon J, et al. Materials Science and Engineering: A, 2017, 694, 1.
9 Mendoza M Y, Samimi P, Brice D A, et al. Metallurgical and Materials Transactions A, 2017, 48(7), 3594.
10 Bermingham M, Stjohn D, Krynen J, et al. Acta Materialia, 2019, 168, 261.
11 Jiang H, Tang H B, Fang Y L, et al. Chinese Journal of Lasers, 2011, 39(2), 78 (in Chinese).
姜华, 汤海波, 方艳丽, 等.中国激光, 2011, 39(2), 78.
12 Zhao Z G, Bo L, Li L, et al. Aeronautical Manufacturing Technology, 2014, 463(19), 46 (in Chinese).
赵志国, 柏林, 李黎, 等.航空制造技术, 2014, 463(19), 46.
13 Yang X W, Yang Y Q, Liu Y, et al. Chinese Journal of Lasers, 2015, 42(3), 62 (in Chinese).
杨雄文, 杨永强, 刘洋, 等.中国激光, 2015, 42(3), 62.
14 Chang F, Miao X G, Xia J Q. Robot Technique and Application, 2019(3), 40 (in Chinese).
常峰, 苗新刚, 夏建强.机器人技术与应用, 2019(3), 40.
15 Zhou P F, Xiao D H, Wu Z, et al. Materials Science and Engineering: A, 2019, 739, 86.
16 Wu W, Zhou R, Wei B, et al. Materials Characterization, 2018, 144, 605.
17 Brif Y, Thomas M, Todd I. Scripta Materialia, 2015, 99, 93.
18 Zhang C, Zhang H, Wu C, et al. Vacuum, 2017, 141, 181.
19 He R J, Wang H M. Journal of Aeronautical Materials, 2009, 29(6), 18 (in Chinese).
贺瑞军, 王华明.航空材料学报, 2009, 29(6), 18.
20 Liu Q, Wang Y, Zheng H, et al. Optics & Laser Technology, 2016, 82, 1.
21 Qi H, Azer M, Singh P. The International Journal of Advanced Manufacturing Technology, 2010, 48(1-4), 121.
22 Zhu X F, Zhong M L, Liu W J, et al. Chinese Journal of Lasers, 2007, 34(1), 185 (in Chinese).
朱晓峰, 钟敏霖, 刘文今, 等.中国激光, 2007, 34(1), 185.
23 Petrat T, Graf B, Gumenyuk A, et al. Physics Procedia, 2016, 83, 761.
24 Joseph J, Jarvis T, Wu X, et al. Materials Science and Engineering: A, 2015, 633, 184.
25 Yan W, Ge W, Qian Y, et al. Acta Materialia, 2017, 134, 324.
26 Guo C, Lin F, Ge W J. Journal of Mechanical Engineering, 2014, 50(21), 152 (in Chinese).
郭超, 林峰, 葛文君.机械工程学报, 2014, 50(21), 152.
27 Yang X, Xi Z P, Liu Y, et al. Rare Metal Materials and Engineering, 2009, 38(7), 1272 (in Chinese).
杨鑫, 奚正平, 刘咏, 等.稀有金属材料与工程, 2009, 38(7), 1272.
28 Fujieda T, Shiratori H, Kuwabara K, et al. Materials Letters, 2015, 159, 12.
29 Fan Q, Li B, Zhang Y. Journal of Alloys and Compounds, 2014, 614, 203.
30 Li B, Wang Y, Ren M, et al. Materials Science and Engineering: A, 2008, 498(1-2), 482.
31 Jiang S Y, Lin Z F, Sun Y X. Rare Metal Materials and Engineering, 2018, 47(10), 277 (in Chinese).
蒋淑英, 林志峰, 孙永兴.稀有金属材料与工程, 2018, 47(10), 277.
32 Kunce I, Polanski M, Bystrzycki J. International Journal of Hydrogen Energy, 2013, 38(27), 12180.
33 Tong Z, Ren X, Jiao J, et al. Journal of Alloys and Compounds, 2019, 785, 1144.
34 Xiang S, Luan H, Wu J, et al. Journal of Alloys and Compounds, 2019, 773, 387.
35 Niu P D, Li R D, Yuan T C, et al. Intermetallics, 2019, 104, 24.
36 Xiang S, Zhang L, Liu X, et al. Transactions of Materials and Heat Treatment, 2018, 39(10), 29 (in Chinese).
向硕, 张雷, 刘学, 等.材料热处理学报, 2018, 39(10), 29.
37 Guan S, Wan D, Solberg K, et al. Materials Science and Engineering: A, 2019, 761, 138056.
38 Xiang S, Luan H, Wu J, et al. Journal of Alloys and Compounds, 2019, 773, 387.
39 Chew Y, Bi G J, Zhu Z G, et al. Materials Science and Engineering: A, 2019, 744, 137.
40 Li Q Y, Li D C, Zhang H, et al. Aeronautical Manufacturing Technology, 2018, 61(10), 61(In Chinese).
李青宇, 李涤尘, 张航, 等.航空制造技术, 2018, 61(10), 61.
41 Li Q Y, Zhang H, Li D C, et al. Journal of Mechanical Engineering, 2019, 55(15), 10 (In Chinese).
李青宇, 张航, 李涤尘, 等.机械工程学报, 2019, 55(15), 10.
42 Li R, Niu P, Yuan T, et al. Journal of Alloys and Compounds, 2018, 746, 125.
43 Yao H, Tan Z, He D, et al. Journal of Alloys and Compounds, 2020, 813, 152196.
44 Fujieda T, Shiratori H, Kuwabara K, et al. Materials Letters, 2017, 189, 148.
45 Yang X, Zhou Y, Xi S, et al. Materials Science and Engineering: A, 2019, 767, 138394.
46 Shiratori H, Fujieda T, Yamanaka K, et al. Materials Science and Engineering: A, 2016, 656, 39.
47 Zhou K, Li J, Wang L, et al. Intermetallics, 2019, 114, 106592.
48 Agrawal P, Thapliyal S, Nene S S, et al. Additive Manufacturing, 2020, 32, 101098.
49 Luo H, Li Z, Mingers A M, et al. Corrosion Science, 2018, 134, 131.
50 Nair R B, Arora H S, Mukherjee S, et al. Ultrasonics Sonochemistry, 2018, 41, 252.
51 Nene S S, Frank M, Liu K, et al. Scripta Materialia, 2019, 166, 168.
52 Kuwabara K, Shiratori H, Fujieda T, et al. Additive Manufacturing, 2018, 23, 264.
53 Fujieda T, Chen M, Shiratori H, et al. Additive Manufacturing, 2019, 25, 412.
54 Melia M A, Carroll J D, Whetten S R, et al. Additive Manufacturing, 2019, 29, 100833.
55 Amar A, Li J, Xiang S, et al. Intermetallics, 2019, 109, 162.
56 Li B, Qian B, Xu Y, et al. Materials Letters, 2019, 252, 88.
57 Li B, Zhang L, Xu Y, et al. Powder Technology, 2020, 360, 509.
58 Li J, Xiang S, Luan H, et al. Journal of Materials Science & Technology, 2019, 35(11), 2430.
59 Savinov R, Yachao W, Jing S. Journal of Manufactyring Process, DOI:10.1016/j.jmapro. 2020.04.018.
60 Li B, Zhang L, Yang B. Composites Communications, 2020, 19, 56.