铌微合金化技术在中高碳钢中的应用现状与发展

doi:10.11896/cldb.20010139

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3301KB)
Export: BibTeX | EndNote (RIS)

Abstract Niobium microalloying technology has been developed in China for more than 40 years, and its basic research and industrial application have been focused on the field of plate-based low-carbon steel. The medium and high carbon steel based on long material has the characteristics of high carbon content, long and complex process, high foundation strength, special and diverse performance requirements, etc. It is difficult for niobium to play an important role in the medium and high carbon steel.
On the one hand, the carbon content of medium and high carbon steel has an effect on the solution ability of niobium, but the research results at home and abroad are quite different, and some conclusions are not consistent with the traditional understanding and most of the experimental results. Therefore, there is a controversy about the solution ability of niobium in medium and high carbon steel, and more empirical research is still needed to analyze. This leads to a dispute about how much niobium is economically effective in medium and high carbon steels. On the other hand, the existence of niobium in medium and high carbon steel, especially the characterization of nano precipitates, has been difficult. How to eliminate the adverse effects caused by the large-scale niobium containing second phase particles with inhomogeneous distribution remains to be further studied.
The research status and development trend of microalloying technology at China and the other part of the word, as well as the characteristics of medium and high carbon steel are summarized. The opportunity and challenge of niobium microalloying technology in medium and high carbon steel are reviewed. It mainly includes the solution ability of niobium, the main effects and application in direct-cooled forging steel, spring steel, hard wire and bearing steel, and the main problems. It is clearly pointed out that the traditional thinking must abandon, strengthen the basic research, and study the common and individual problems of niobium in medium and high carbon steel. In particular, new technologies are used to characterize the state of niobium at multiple scales. So as to promote the application of niobium microalloying technology in medium and high carbon steel.

Key words： microalloying technology special steel medium and high carbon steel solid solution and precipitation

Published: 12 March 2021

CLC number:

TG142.1

Fund:Science and Technology Project of Qinghai Province, China (2018-ZJ-747), and CITIC-CBMM Niobium Steel R & D Project.

About author:: Chaolei Zhang received his Ph.D. degree in material processing engineering from University of Science and Technology Beijing (USTB) in January 2013. He is currently an associate professor in USTB. His research interests are control of material microstructure and pro-perties, development and application of advanced steel materials. He has published more than forty papers as the first author and correspondence author. And more than ten Chinese invention patents were authorized.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Chaolei
	SHAO Zhuhao
	LI Jian
	WANG Wenjun
	JIANG Bo

Cite this article:

ZHANG Chaolei,SHAO Zhuhao,LI Jian, et al. Application and Development of Niobium Microalloying Technology in Medium and High Carbon Steel[J]. Materials Reports, 2021, 35(5): 5102-5106.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20010139 OR http://www.mater-rep.com/EN/Y2021/V35/I5/5102

1 DeArdo A J. International Materials Reviews,2003,48(6),371.
2 Yong Qilong, Ma Mingtu, Wu Baorong. Microalloyed steel-physical and mechanical metallurgy, China Machine Press, China,1989(in Chinese).
雍歧龙,马鸣图,吴宝榕.微合金钢-物理和力学冶金,机械工业出版社,1989.
3 Klaus V, Guimarues R C. Microalloying Technology,2002,2(2),49.
4 Morrison W B. Materials Science and Technology,2009,25(9),1066.
5 Ching Central Iron & Steel Research Institute. In: Proceedings of International Symposium on Nb-bearing Steel Technology Development in China for the 30th Anniversary Celebration. Beijing,2009,pp.101(in Chinese).
钢铁研究总院结构材料所.中国含铌钢技术发展30周年国际研讨会.北京,2009,pp.101.
6 Matlock D K, Speer J G. Materials Science and Technology,2009,25(9),1118.
7 Jansto S G. Metallurgical and Materials Transactions B,2014,45,438.
8 Palmiere E J, Garcia C I, DeArdo A J. Metallurgical and Materials Transactions A,1994,25(2),277.
9 Gong P, Palmiere E J, Rainforth W M. Acta Materialia,2015,97,392.
10 Lakshmanan V K, Kirkaldy J S. Metallurgical and Materials Transactions A,1984,15(3),541.
11 Ohtani H, Nishizawa T, Tanaka T, et al. In: Proceedings of the Japan Canada Seminar on Secondary Steelmaking. Tokyo,1985,pp.1.
12 Hulka K, Heisterkamp F. In: Fundamental of Microalloying Forging Steels. Golden, USA,1986,pp.225.
13 Balasubramanian K, Kroupa A, Kirkaldy J S. Metallurgical and Materials Transactions A,1992,23(3),729.
14 Mi Y F, Cao J C, Zhang Z Y, et al. Iron and Steel,2012,47(3),84(in Chinese).
米永峰,曹建春,张正延,等.钢铁,2012,47(3),84.
15 Jiang B, Fang W, Chen R M, et al. Materials Science and Engineering,2019,748A,180.
16 Zhang C L, Liu Y Z. Materials Reports A: Review Papers,2017,31(3),58(in Chinese).
张朝磊,刘雅政.材料导报:综述篇,2017,31(3),58.
17 Zhang W, Wang H, Zhang C L, et al. Materials Science & Engineering Technology,2020,51,238.
18 The Chinese Society for Metals. “Development and application of non quenched and tempered steel for high performance and large size direct cutting”Evaluation meeting of scientific and technological achievements of the project held in Beijing [DB/OL]. http://www.csm.org.cn/tpxw/2020116/1579153340218_1.html.2020-01-16(in Chinese).
中国金属学会.“高性能大规格直接切削用非调质钢开发及推广应用”项目科技成果评价会在北京召开[DB/OL].http://www.csm.org.cn/tpxw/2020116/1579153340218_1.html.2020-01-16.
19 Zhang B, Wang F M, Wu H L, et al. Heat Treatment of Metals,2011,36(5),29(in Chinese).
张博,王福明,吴华林,等.金属热处理,2011,36(5),29.
20 Zhang C L, Zhao F, Wen X L, et al. Transactions of Materials and Heat Treatment,2015,36(9),167(in Chinese).
张朝磊,赵帆,文新理,等.材料热处理学报,2015,36(9),167.
21 Zhang C L, Liu Y Z, Zhou L Y, et al. Journal of Iron and Steel Research International,2012,19(3),47.
22 Zhang C L, Han Q, Sun S, et al. Heat Treatment of Metals,2010,35(11),42(in Chinese).
张朝磊,韩强,孙帅,等.金属热处理,2010,35(11),42.
23 Zhang C L, Liu Y Z, Jiang C, et al. Journal of Iron and Steel Research International,2011,18(6),49.
24 Wang Dehu. In: International Seminar on Production and Application Technology of High Quality Special Steel in 2019. Beijing, China,2019,pp.18(in Chinese).
王德虎.2019年高品质特殊钢生产和应用技术国际研讨会.北京,2019,pp.18.
25 Gu K J, Wei J, Yu H Y, et al. Iron and Steel,2005,40(11),24(in Chinese).
顾克井,魏军,虞海燕,等.钢铁,2005,40(11),24.
26 Zhang Yongqing. Strengthening effect and application case of niobium in medium and high carbon steel. World Metals,2018-06-26(B08)(in Chinese).
张永青.铌在中高碳钢中的强化效果及应用案例.世界金属导报,2018-06-26(B08).
27 Zhang Z Y, Yong Q L, Sun X J, et al. Iron and Steel,2012,47(4),79(in Chinese).
张正延,雍岐龙,孙新军,等.钢铁,2012,47(4),79.
28 Yong Q L, Zhang Z Y, Sun X J, et al. Journal of Iron and Steel Research International,2017,24(9),973.
29 Dey I, Chandra S, Saha R, et al. Materials Characterization,2018,140,45.
30 Sun M L, Jiang B, Chen G, et al. Heat Treatment of Metals,2016,41(4),71(in Chinese).
孙曼丽,江波,陈刚,等.金属热处理,2016,41(4),71.
31 Zhang C L, Yu W M, Wang S W, et al. Transactions of Materials and Heat Treatment,2015,36(2),97(in Chinese).
张朝磊,余伟铭,王嗣雯,等.材料热处理学报,2015,36(2),97.
32 Deng S H, Liu Q Y, Chao Y L, et al. Shanghai Metals,2015,37(6),5(in Chinese).
邓素怀,刘清友,晁月林,等.上海金属,2015,37(6),5.
33 Li J J, Mei Z, Lyu Y, et al. Hot Working Technology,2016,45(12),51(in Chinese).
李佳佳,梅珍,吕莹,等.热加工工艺,2016,45(12),51.
34 He G N, Zhou N B, Zhang C L, et al. Journal of Tribology,2018,140(6),061608-1.
35 Zhao H, Wang H X. Manufacturing Automation,2015(3),99(in Chinese).
赵辉,王红霞.制造业自动化,2015(3),99.
36 Wu X D, Chen R L, Zhang D X, et al. Foundry,2013,62(11),1111(in Chinese).
吴晓东,陈瑞泷,掌道新,等.铸造,2013,62(11),1111.
37 Xiao B, Lei Y C, Wu X D, et al. Foundry,2014,63(4),381(in Chinese).
肖波,雷玉成,吴晓东,等.铸造,2014,63(4),381.
38 Zhou L Y, Zhang C L, Liu X, et al. Transactions of Materials and Heat Treatment,2014,35(8),153(in Chinese).
周乐育,张朝磊,刘翔,等.材料热处理学报,2014,35(8),153.