| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Cold Rolling Deformation Behavior and Interface Transition Layer Evolution of Cu-Be/Cu-Zn Laminated Composite |
| TANG Yanchuan1, XU Juwen1, CUI Zeyun1, WANG Wenhui1, ZHANG Xinlei1, TANG Xingchang2,3, ZHAO Longzhi1
|
1 School of Materials Science and Engineering, East China Jiaotong University, Nanchang 330013, China
2 State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China
3 School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China |
|
|
|
Abstract After aging treatment, the ultimate tensile strength of high strength beryllium copper alloy can reach 1 400 MPa but the elongation is less than 5%. The significant strength and ductility trade-off presented in the beryllium copper alloy seriously affects the safety and reliability during the service. The local strain concentration which leads to the low plasticity can be suppressed by applying the laminated heterogeneous configuration design to the Cu-Be alloy. It is expected to acquire material with high strength-ductility through the preparation of Cu-Be/Cu-Zn laminated metal matrix composite. The preparation of laminated metal matrix composite through plastic deformation is easy to realize, which has caused widely concern. Previous researches of laminated metal matrix composite rolling deformation mainly focused on the deformation characteristics of metal components, but few works concerned the deformation characteristics of interface transition layers during rolling.
In this work, we successfully prepared a Cu-Be/Cu-Zn laminated metal matrix composite by vacuum hot pressing and subsequent cold rolling. The cold rolling deformation behavior and interface transition layer evolution of Cu-Be/Cu-Zn laminated metal matrix composite were investigated by an optical microscope (OM), a field-emission scanning electron microscope (FE-SEM) with energy dispersion spectrum (EDS) and a Vic-kers hardness tester. The results show that the interfaces between the Cu-Be layers and Cu-Zn layers of the laminated metal matrix composite without cold rolling are of straight shape and the interface bonding is well, without cracks or voids. When the cold rolling reduction rate is less than 50%, inhomogeneous macroscopic deformation occurs in the composite. The deformation of Cu-Zn layers in the thickness direction is obviously larger than that of Cu-Be layers and transition layers. The thickness of transition layers is only reduced by 8.3% with the cold rolling reduction rate of 35%. The inhomogeneous plastic deformation changes the Cu-Be/Cu-Zn interfaces from straight to wavy. When the cold rolling reduction rate is above 65%, different layers of the laminated metal matrix composite deform uniformly and the thickness of the layers changes according to the cold rolling reduction rate. The transition layers possess the highest microhardness, followed by the Cu-Be layers and the Cu-Zn layers have the lowest microhardness in the case of the same cold rolling reduction rate. The high microhardness of the transition layers can be attributed to the significant shear stress state caused by coordinating the deformation of metal layers during the cold rolling of laminated metal matrix composite, which generates the extra back stress strengthening.
In this work, the macroscopic deformation and strengthening mechanism of the transition layers in the Cu-Be/Cu-Zn laminated metal matrix composite during cold rolling is discussed, which contributes to better understanding of the plastic deformation characteristics and more reasonable formulating the processing during plastic forming of laminated metal matrix composite.
|
|
Published: 19 January 2021
|
|
|
| Fund:This work was financially supported by the National Natural Science Foundation of China (51701074), Natural Science Foundation of Jiangxi Province (20181BAB216003) and Project of Jiangxi Education Department (GJJ170407). |
About author:: Yanchuan Tang received his Ph.D. degree in materials science and engineering from the University of Science and Technology Beijing (USTB) in Sep. 2011—Jan. 2017. He is currently an associate professor and master student supervisor in East China Jiaotong University. He was selected for the “Tianyou scholar” of East China Jiaotong University and “Shuangchuang talents of Jiangsu Province”. He has published more than 10 journal papers as the first author and applied 7 national invention patents and utility model patent. In recent years, he has taken charge in the projects of National Natural Science Foundation, Jiangxi Natural Science Foundation and Jiangxi Education Department. His research interests focus on the plastic forming of metallic materials, development of advanced metal structural materials and laser forming technology of metal matrix composite.
Longzhi Zhao is currently a professor and doctoral supervisor in East China Jiaotong University. He was selected for the “Young Scientist of Jiangxi Province”, “New Century Talents Project of Jiangxi Province”, “Tianyou scholar” of East China Jiaotong University and “Zhenjiang manufacturing 2025 leading talents”. He is the vice president of the Plastic Branch of Jiangxi Mechanical Engineering Society, vice president of Jiang-xi Mold Industry Association and director of China Surface Engineering Association. He is also a member of the editorial board of Foundry Technology and Journal of Ordnance Equipment Engineering. In recent years, he has published more than 160 journal papers, including 62 papers indexed by EI and 27 papers indexed by SCI. He has taken charge and taken part in more than 30 national, provincial and ministerial scientific research projects. His research interests focus on high-performance metal matrix composites, material surface strengthening and laser forming technology. |
|
|
1 Xu D M, Qin G W, Li F, et al. The Chinese Journal of Nonferrous Metals,2014,24(5),1212(in Chinese).
许德美,秦高梧,李峰,等.中国有色金属学报,2014,24(5),1212.
2 Berto F, Lazzarin P, Gallo P. Journal of Strain Analysis for Engineering Design,2014,49,244.
3 Zhang H T, Jiang Y B, Xie J X, et al. Journal of Alloys and Compounds,2019,773,1121.
4 Antolovich S D, Armstrong R W. Progress in Materials Science,2014,59,1.
5 Wu X L, Zhu Y T. Materials Research Letters,2017,5(8),527.
6 Li J S, Wang S Z, Mao Q Z, et al. Materials Science and Engineering: A,2019,756,213.
7 Xu S H, Zhou C S, Liu Y. The Chinese Journal of Nonferrous Metals,2019,29(6),1125(in Chinese).
徐圣航,周承商,刘咏.中国有色金属学报,2019,29(6),1125.
8 Xing Z P, Kang S B, Kim H W. Journal of Materials Science,2002,37(4),717.
9 Zeng L F, Gao R, Fang Q F, et al. Acta Materialia,2016,110,341.
10 Zhu H F, Sun W, Kong F T, et al. Materials Science and Engineering: A,2019,742,704.
11 Mo T Q, Chen Z J, Li B X, et al. Materials Science and Engineering: A,2019,755,97.
12 Li L, Chen M Y, Gu L L, et al. Journal of Plasticity Engineering,2015,22(2),68(in Chinese).
李龙,陈梅艳,顾琳琳,等.塑性工程学报,2015,22(2),68.
13 Qin L, Fan M Y, Guo X Z, et al. Vacuum,2018,155,96.
14 Mahallawy N E, Fathy A, Abdelaziem W, et al. Materials Science and Engineering: A,2015,647,127.
15 Hosseini M, Pardis N, Danesh Manesh H, et al. Materials & Design,2017,113,128.
16 Tang R Z, Tian R Z. Binary alloy phase diagrams and crystal structure of intermediate phase, Central South University Press, China,2009(in Chinese).
唐仁政,田荣璋.二元合金相图及中间相晶体结构,中南大学出版社,2009.
17 Ma X L, Huang C X, Moering J, et al. Acta Materialia,2016,116,43.
18 Liu P, Ren F Z, Jia S G, et al. Copper alloy and its application, Chemical Industry Press, China,2007(in Chinese).
刘平,任凤章,贾淑果,等.铜合金及其应用,化学工业出版社,2007.
19 Li X B, Zu G Y, Ding M M, et al. Materials Science and Engineering: A,2011,529,485.
20 Ma X L, Huang C X, Xu W Z, et al. Scripta Materialia,2015,103,57.
21 Wu X L, Yang M X, Yuan F P, et al. Proceedings of the National Academy of Sciences,2015,112(47),14501. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2021, Vol. 35 
