不同粒子改性环氧树脂基碳纤维复合材料低速冲击及冲击后压缩性能

doi:10.11896/cldb.19070108

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7052KB)

Suppl. Info.
Export: BibTeX | EndNote (RIS)

Abstract Epoxy resin was modified by single-layer nano graphene oxide (GO), nano SiO₂ and ceramic powder particles. Carbon fiber reinforced composite (CFRP) laminates were prepared by vacuum assisted resin transfer molding (VARTM) process at three ply angles of [±45/0/90]_S, [90₈]_T, [0₈]_T respectively. Through drop hammer impact test, ultrasonic C scan test and post-impact compression test, experimental research on different particle modified CFRP was carried out. The results show that nano-particle modification can significantly improve the impact resis-tance and post-impact compression performance of CFRP. Compared with other ply angles, [±45/0/90]_S ply CFRP effectively inhibits the propagation of impact cracks, and the maximum impact load and post-impact compression strength of the [±45/0/90]_S ply laminate modified by single-layer nano GO reach 3 470 N and 124.8 MPa respectively, with an impact damage area of only 580 mm². Compared with the same kind of laminate without particle modification, the maximum impact load and the compressive strength after impact are increased by 30%, 47.3% and the impact damage area is reduced by 15.5%.

Key words： fiber reinforcement particle modification impact property post-impact compression property

Published: 28 January 2021

CLC number:

TB332

Fund:The Natural Science Foundation of China (51763016), Jiangxi Innovation Driven “5511” Engineering Science and Technology Innovation Talent Project (20165BCB18012).

About author:: Sen Wangstudied in Nanchang University from September 2017 to June 2020, mainly engaged in polymer molding research.
Jiamei Lai, associate professor, School of Mechanical and Electrical Engineering, Nanchang University, gra-duated from Nanchang University in 2004 with a docto-rate degree in material processing engineering. Mainly engaged in the research and preparation of polymer-matrix composite materials.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Sen
	LAI Jiamei
	RUAN Jinqi
	HU Genquan
	HUANG Zhichao

Cite this article:

WANG Sen,LAI Jiamei,RUAN Jinqi, et al. Low Speed Impact and Compression Properties of Epoxy Based Carbon Fiber Composite Modified by Different Particles[J]. Materials Reports, 2021, 35(2): 2178-2184.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19070108 OR http://www.mater-rep.com/EN/Y2021/V35/I2/2178

1 Afzal A, Siddiqi H M. Polymer, 2011, 52(6), 1345.
2 Liu Q, Zhou X, Fan X, et al. Polymer-Plastics Technology and Engineering, 2012, 51(3), 251.
3 Park S J, Li K, Hong S K. Solid State Phenomena, 2006, 111, 159.
4 Yao H W, Zhong S G, Li X H, et al. Materials Engineering, 2016, 44(12), 13(in Chinese).
姚红伟, 钟盛根, 李显华, 等. 材料工程, 2016, 44(12), 13.
5 Sui X H, Shi J, Yao H W, et al. Composites, Part A. Applied Science and Manufacturing, 2017, 92A, 134.
6 Zhao Z B, Teng K Y, Li N, et al. Composite Structures, 2017, 159(1), 761.
7 Chen L, Jin H, Xu Z W, et al. Journal of Materials Science, 2015, 50(1), 112.
8 Li N, Yang X X, Bao F, et al. Polymers, 2019, 11(2), 237.
9 Dang C Y, Ma J L, Wu Y Q, et al. FRP, 2017(2), 1(in Chinese).
党晨阳, 马俊丽, 吴银秋, 等. 玻璃钢, 2017(2), 1.
10 Zhou H, Piao M X, Li Q, et al. Acta Materiae Compositae Sinica, 2015, 32(5), 1309(in Chinese).
周宏, 朴明昕, 李芹, 等. 复合材料导报, 2015, 32(5), 1309.
11 Liu J C, Zhang H L, Li X B, et al. Synthetic Resins and Plastics, 2002, 19(1), 30(in Chinese).
刘竞超, 张华林, 李小兵, 等. 合成树脂及塑料, 2002, 19(1), 30.
12 Asi O. Composite Structures, 2010, 92(2), 354.
13 Naous W, Yu X Y, Zhang Q X, et al. Journal of Polymer Science Part B Polymer Physics, 2006, 44(10), 1466.
14 Schoeppner G A, Abrate S. Composites, Part A. Applied Science and Manufacturing, 2000, 31A(9), 903.
15 Hu J Y. Study on low speed impact characteristics and damage mechanism of fabric composites. Master's Thesis, Harbin University of Technology, China, 2010(in Chinese).
胡靖元. 织物复合材料低速冲击特性与损伤机理研究. 硕士学位论文,哈尔滨工业大学, 2010.
16 Wu G S, Ma L C, Wang Y W,et al. Composites, Part A. Applied Science and Manufacturing, 2016, 84A, 1.
17 Ji Soo Kwon, Ji Sun Kim, Hak Sung Lee, et al. Journal of Nanoscience and Nanotechnology, 2019, 19(2), 882.
18 Zhang H, Tang L C, Zhang Z et al. Polymer, 2008, 49(17), 3816.
19 Ma J, Mo M S, Du X S,et al. Polymer, 2008, 49(16), 3510.
20 Ghosh P, Pathak A, Goyat M,et al. Journal of Reinforced Plastics and Composites, 2012, 31(17), 1180.
21 Sarasini F, Tirillò J, Valente M, et al. Materials & Design, 2013, 49, 290.
22 Wang J. Composite material foam sandwich structure under low velocity impact and impact compression properties. Ph.D. Thesis, Shanghai Jiao Tong University, China, 2013(in Chinese).
王杰. 复合材料泡沫夹层结构低速冲击与冲击后压缩性能研究.博士学位论文,上海交通大学, 2013.
23 He Y B. Research on low energy impact damage and dynamic response of typical structures of aviation composite materials. Ph.D. Thesis, South China University of Technology, China, 2016(in Chinese).
何艳斌. 航空复合材料典型结构低能量冲击损伤及动力响应研究.博士学位论文, 华南理工大学, 2016.