MATERIALS AND SUSTAINABLE DEVELOPMENT:ENVIRONMENT-FRIENDLY MATERIALS AND MATERIALS FOR ENVIRONMENTAL REMEDIATION |
|
|
|
|
|
Research Progress on Rectorite-based Photocatalysts |
YANG Wei, GUO Sheng, CHEN Jinyi
|
School of Chemistry and Environmental Engineering,Wuhan Institute of Technology, Wuhan 430205, China |
|
|
Abstract Photocatalysis plays a vital role in counteracting worldwide environmental pollution and energy shortage because it can use solar energy for photocatalytic degradation of pollutants, photocatalytic hydrogen generation, carbon dioxide storage and disinfection. The key of photocatalytic technology is to design an efficient, cost-effective and recyclable photocatalysts. However, the photocatalytic efficiency of traditional photoca-talysts is limited by their poor utilization of solar energy, low quantum yield and insufficient photochemical stability. In recent years,many methods have been developed to enhance the photocatalytic activity of semiconductor photocatalysts, including morphological control, metal or non-metal doping,heterojunction design, noble metal deposition, loading and developing novel photocatalysts. Photocatalytic processes are mainly solid-liquid reactions on the surface,thus better adsorption performance and higher surface activity are highly desirable for photocatalysts. However, the small specific surface area and poor adsorption capacity lead to the low efficiency of many photocatalysts. In addition, most photocatalysts tend to agglomerate and difficult to separate and recover, which hinder their large-scale applications.In the last decades, many efforts have been devoted to fabricating rectorite-based photocatalysts,the large specific surface area, excellent ion exchange performance and stable structure of rectorite making it possible to solve the problems of poor adsorption and separation of conventional photocatalysts, thus improve photocatalytic efficiency.Additionally, the unique layered structure of rectorite may facilitate the photocatalytic reactions. Till now,numerous cost-effective, highly efficient and stable rectorite-based photocatalysts such as rectorite-supported TiO2,Bi2O3,Bi2WO6,BiOI,Bi2NbO5F,ZnO,Ag3PO4,In2O3,CdS,Cu2O and g-C3N4 have been successfully synthesized. It was found that the introduction of rectorite in the composite could effectively enhance the adsorption performance,inhibit the combination of photogenerated electrons and holes,depress photo corrosion and increase the visible light utilization of the catalysts, which promoted the practical applications of rectorite-based photocatalysts in environmental field. This article systematically reviews the research progress of rectorite-based composites in photocatalytic field, the preparation process of the rectorite-based photocatalysts has been summarized, and special emphasis is given to the mechanism of rectorite for the enhanced photocatalytic performance. Moreover, the influences of preparation and reaction conditions on the catalytic activities of the rectorite-based photocatalysts are elaborated. Finally, the development prospects of rectorite-based photocatalytic composites are given, which may provide insights into the applications of rectorite-based materials in photocatalytic field.
|
Published: 13 May 2020
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51604194, 51374157),Postgraduate Education Innovation Foundation of Wuhan Institute of Technology (CX2018145) and China Scholarship Council (201808420137). |
About author:: Wei Yang, received his B.E. degree in environmental engineering from North China University of Technology in 2017. He is currently pursuing his master's degree in the School of Chemistry and Environmental Enginee-ring,Wuhan Institute of Technology under the supervision of Prof. Jinyi Chen and A/Prof. Sheng Guo. His research has focused on the modification of clay mineral materials and their applications for water pollution control. Sheng Guo, received his Ph.D. degree in environmental engineering from Wuhan University of Technology in 2015. He is currently an anassociate professor in Wuhan Institute of Technology. Since December 2018, he pursued postdoctoral research work in Nanyang Environment & Water Research Institute, Nanyang Technological University, Singapore. His research interests are green and novel environ mentalmaterials,advanced oxidation processes (AOPs) such as photocatalysis and Fenton/PMS activation, and 3D printing technologies for environmental applications. Jinyi Chen, dean and professor of School of Chemistry and Environmental Engineering,Wuhan Institute of Technology, supported by Program for New Century Excellent Talents in University, the Third Level Personnel of High-level Talent Engineering in Hubei Province in the New Century and the director of the Engineering Research Center of Chemical Environmental Pollution Control in Hubei Province. He received his Ph.D. degree from School of Resources and Environmental Sciences, Wuhan University in 2007. His research interests include water pollution control, new-type environmental functional materials and ecological environment planning. |
|
|
1 Fujishima A, Honda K. Nature, 1972, 238(5358),37. 2 Hao R A, Cao S W, Yu J G. Acta Physico-Chimica Sinica, 2016, 32(12),2842 (in chinese). 赫荣安, 曹少文, 余家国.物理化学学报, 2016, 32(12),2842. 3 Yu J G, Xu D F. Journal of the Chinese Ceramic Society. 2017, 45(9),1240 (in Chinese). 余家国, 许第发. 硅酸盐学报, 2017, 45(9),1240. 4 Feng F, Li C, Jian J, et al. Chemical Engineering Journal, 2019, 368(3),959. 5 Wang X, Liu G, Wang L, et al.Advanced Energy Materials, 2012, 2(1),42. 6 Zhou Y, Zhang Y, Lin M, et al.Nature Communications, 2015, 6,8340. 7 Qi K Z, Chen B, Yu J G. Chinese Journal of Catalysis, 2017, 38(12),1937 (in Chinese). 戚克振, 程蓓, 余家国. 催化学报, 2017, 38(12),1937. 8 Wang C L, Li F, Yang K, et al. Materials Reports A:Review Papers,2018, 32(11),3349 (in Chinese). 王春来, 李钒, 杨焜, 等. 材料导报:综述篇, 2018, 32(11),3349. 9 Deng L J, Xie Y, Zhang G K. Chinese Journal of Catalysis, 2017, 38(2),379 (in Chinese). 邓丽娟, 谢毅, 张高科. 催化学报, 2017, 38(2),379. 10 Tan G J, Ren X C, Wang Z, et al. Chinese Journal of Environmental Engineering, 2017, 11(4),2313 (in Chinese). 谭光杰, 任学昌, 王拯, 等. 环境工程学报, 2017, 11(4), 2313. 11 Xiao X, Zhu W W, Liu Q Y, et al. Environmental Science & Technology, 2016, 50(21),11895. 12 Kutláková K M, Tokarský J, Kovárˇ P, et al. Journal of Hazardous Materials, 2011, 188(1-3),212. 13 Jin Z, Duan W, Duan W, et al.Applied Catalysis A: General, 2016, 517,129. 14 Hu J L, Qian H S, Li J J, et al.Particle & Particle Systems Characterization, 2013, 30(4),306. 15 Kumar A, Khan M, Zeng X, et al.Chemical Engineering Journal, 2018, 353,646. 16 Zhang Y, Deng L, Zhang G, et al.Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011, 384(1-3),137. 17 Xiao J R, Peng T Y, Ke D N, et al.Journal of Functional Materials, 2007, 38(7),1110 (in Chinese). 肖江蓉, 彭天右, 柯丁宁, 等. 功能材料, 2007, 38(7),1110. 18 Zhang Y, Guo Y, Zhang G, et al.Applied Clay Science, 2011, 51(3),335. 19 Zhang Z Q.Journal of Wuhan Institute of Chemical Technology, 2004, 26(3),28 (in Chinese). 张泽强. 武汉化工学院学报, 2004, 26(3),28. 20 Deng D M, Jiang Y J, Gan F X, et al.Journal of Wuhan University (Natural Science Edition), 2007, 53(2),189 (in Chinese). 邓德明, 姜毅俊, 甘复兴, 等. 武汉大学学报 (理学版), 2007, 53(2), 189. 21 Zhang X, Wu P X, Wu J H, et al.Acta Scientiae Circumstantiae, 2014, 34(3), 612 (in Chinese). 张星, 吴平霄,吴锦华, 等. 环境科学学报, 2014, 34(3), 612. 22 Asahi R, Morikawa T, Ohwaki T, et al.Science, 2001, 293(5528), 269. 23 Khan S U M, Al-Shahry M, Ingler W B.Science, 2002, 297(5590),2243. 24 Lin X J, Sun M X, Hu M Y, et al.Materials Reports B:Research Papers, 2018, 32(4),1213 (in Chinese). 林小靖, 孙明轩, 胡梦媛, 等. 材料导报:研究篇, 2018, 32(4),1213. 25 Ding Z M, Guo S, Wu X, et al.Functional Materials Letters, 2018, 11(4),1. 26 Guo S, Yang Z, Wen Z, et al.Journal of Colloid and Interface Science, 2018, 532,441. 27 Chen X, Burda C.Journal of the American Chemical Society, 2008, 130(15),5018. 28 Boningari T, Inturi S N R, Suidan M, et al.Chemical Engineering Journal, 2018, 350,324. 29 Bu X Z, Zhang G K, Gao Y Y, et al.Microporous and Mesoporous Mate-rials, 2010, 136(1-3),132. 30 Huang Z, Wu P, Gong B, et al.Applied Clay Science, 2017, 142,128. 31 Bu X, Wang Y, Li J, et al.Journal of Alloys and Compounds, 2015, 628,20. 32 Bukowski B, Deskins N A.Physical Chemistry Chemical Physics, 2015, 17(44),29734. 33 Long M, Qin Y, Chen C, et al.The Journal of Physical Chemistry C, 2013, 117(32),16734. 34 Chen H, Deng D M, Li S, et al.Journal of Wuhan University (Natural Science Edition), 2016, 62(1),85 (in Chinese). 陈泓, 邓德明, 李硕, 等. 武汉大学学报 (理学版), 2016, 62(1),85. 35 Dong F, Li Q, Sun Y, et al.ACS Catalysis, 2014, 4(12),4341. 36 Wu S, Fang J, Xu W, et al.Journal of Molecular Catalysis A: Chemical, 2013, 373,114. 37 Luo S, Chen J, Huang Z, et al.ChemCatChem, 2016, 8(24),3786. 38 Wang L, Wang Z, Zhang L, et al.Chemical Engineering Journal, 2018, 352,665. 39 Guo Y, Zhang G, Gan H.Journal of Colloid and Interface Science, 2012, 369(1),323. 40 Wu S, Fang J, Hong X, et al.Dalton Transactions, 2014, 43(6),2611. 41 Chen Y, Fang J, Lu S, et al.Materials Research Bulletin, 2015, 64,97. 42 Wang J, Fan J, Li J, et al.Ultrasonics Sonochemistry, 2018, 48,404. 43 Li S, Zhou P, Zhang W, et al.Journal of Alloys and Compounds, 2014, 616,227. 44 Guo Y, Li L, Li Y, et al.Journal of Radioanalytical and Nuclear Chemistry, 2016, 310(2),883. 45 Yi Z, Ye J, Kikugawa N, et al.Nature Materials, 2010, 9(7),559. 46 Ma X, Lu B, Li D, et al.The Journal of Physical Chemistry C, 2011, 115(11),4680. 47 Umezawa N, Shuxin O, Ye J.Physical Review B, 2011, 83(3),035202. 48 Guo Y, Yu W, Chen J, et al. Ultrasonics Sonochemistry, 2017, 34,831. 49 Dai Y M, Lee W W, Lin W C, et al.Journal of the Chinese Chemical Society, 2013, 60(12),1415. 50 Bu X, Wu B, Long T, et al.Journal of Alloys and Compounds, 2014, 586,202. 51 Xiao J, Peng T, Ke D, et al.Physics and Chemistry of Minerals, 2007, 34(4),275. 52 Xiao J, Peng T, Dai K, et al.Journal of Solid State Chemistry, 2007, 180(11),3188. 53 Lu Y, Chang P R, Zheng P, et al.Chemical Engineering Journal, 2014, 255,49. 54 Yang Y, Zhang G, Xu W. Journal of Colloid and Interface Science, 2012, 376(1),217. 55 Sun Z, Zhang X, Zhu R, et al.Materials, 2018, 11(12),2452. 56 Deng D M, Li F G, Wang J W, et al.Journal of Wuhan University (Natural Science Edition), 2006, 52(6),713 (in Chinese). 邓德明, 李富贵, 王家文, 等. 武汉大学学报 (理学版), 2006, 52(6),713. 57 Chen Y, Fang J, Lu S, et al.Journal of Hazardous Materials, 2015, 297,278. 58 Xiao J R, Peng T Y, Zhou S Y, et al.Chemical Journal of Chinese Universities, 2011, 32(12),2823 (in Chinese). 肖江蓉, 彭天右, 周胜银, 等. 高等学校化学学报, 2011, 32(12),2823. 59 Zhang L, Shi T X, Sun J S, et al.Chinese Journal of Environmental Engineering, 2007, 1(6), 35 (in Chinese). 张蕾, 石眺霞, 孙家寿, 等. 环境工程学报, 2007, 1(6),35. 60 Xie Y, Zhang G K, Zhu C S, et al.Industrial Safety and Environmental Protection, 2004, 30(7),28 (in Chinese). 谢毅, 张高科, 祝春水, 等. 工业安全与环保, 2004, 30(7),28. 61 Xu J, Fu L C, Zheng J D, et al.Environmental Pollution and Control, 2017(1),88 (in Chinese). 徐杰, 付林晨, 郑建东, 等. 环境污染与防治, 2017(1),88. 62 Chen J Y, Li N, Li J, et al.Acta Physico-Chimica Sinica, 2011(7),932 (in Chinese). 陈金毅, 李念, 李晶, 等.物理化学学报, 2011(7),932. 63 Chen Y, Yu F, Liu Y T, et al.Materials Reports B:Research Papers, 2018, 31(12), 123 (in Chinese). 陈雨, 余飞, 刘禹彤, 等. 材料导报:研究篇, 2018, 31(12),123. 64 Guo S, Zhang G, Guo Y, et al.Carbon, 2013, 60,441. 65 Xu N C, Shi D D, Dang L, et al.Materials Reports B:Research Papers, 2018, 31(8),38 (in Chinese). 许乃才, 史丹丹, 党力, 等. 材料导报:研究篇, 2018, 31(8), 38. |
|
|
|