等离子体处理二氧化硅对剪切增稠液体含浸芳纶织物防刺性能的影响

doi:10.11896/cldb.18070136

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (2569KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to obtain the lightweight of flexible stab resistance armor to enhance its wearable, this study uses plasma treatment of silica particles in shear thickening fluid (STF) to enhance its shear thickening performance, so as to explore the impact of plasma treatment on the stab resistance performance of shear thickening fabric containing immersion. This research use PR-3 type plasma generator, scanning electron microscopy (Gemini SEM500), malvin rotational rheometer, Fourier transform infrared spectrometer, asana microscope (Nikon SMZ-10A), universal power machine on plasma processing silica (SiO₂) the rheological properties of shear thickening fluid, and STF dipped aramid fabric tensile, stab sword and cone performance effects were studied. The results showed that the critical shear rate of shear thickening fluid dropped to 23.2 s^-1 after plasma treatment. The cone loading of pure aramid fiber fabric was 23.34 N, increased to 41.13 N after plasma treatment and increased by 76%. As the plasma treated SiO₂ particles are etched, the active groups on the particle surface are increased, and the friction resistance between particles increases, which reduces the critical shear rate. Based on the results of this study, low cost and high strength anti-puncture composite fabrics were successfully prepared.

Key words： aramid fabric shear thickening fluid plasma treatment stab resistance property

Published: 12 July 2019

CLC number:

TB332

Fund:This work was financially supported by the University Innovation Team Project of Tianjin (TD13-5043), the National Natural Science Foundation of China (51503145,11702187,11602168), the Natural Science Foundation of Tianjin(18JCQNJC03400), the Provincial Natural Science Foundation of Fujian(2018J01505, 2018J01504).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Xing
	HUO Junli
	LI Tingting
	LIN Jiahong
	LOU Chingwen 1

Cite this article:

LIU Xing,HUO Junli,LI Tingting, et al. Effect of Plasma-treated Silica on the Stab Resistance of Shear Thickening Fluid Impregnated Aramid Fabrics[J]. Materials Reports, 2019, 33(16): 2799-2803.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18070136 OR http://www.mater-rep.com/EN/Y2019/V33/I16/2799

[1] Nascimento L F C, Louro L H L, Monteiro S N, et al. JOM, 69(10), 2052.
[2] Croitoro E M, Boros I E. Sanctions of the Canadian Society for Mechanical Engineering, 2007, 31(2), 157.
[3] Miao X H, Kong X Y, Jiang G M. Journal of Industrial, 2013, 43(2), 281.
[4] Flambard X, Polo J. Advanced Materials, 2014, 36(1), 30.
[5] Sun L L, Xiong D S, Xu C Y. Journal of Applied Polymer Science, 2013, 129(4), 1922.
[6] Hou L G, Liu Y C, Zeng L K. China Ceramics Industry, 2013, 20(1), 25 (in Chinese).
侯来广, 刘艳春, 曾令可. 中国陶瓷工业, 2013, 20(1), 25.
[7] Peng C Y. Preparation and performance of shear thickening liquid-carbon fiber composites. Master’s Thesis, Dalian University of Technology, China, 2015 (in Chinese).
彭传玉. 剪切增稠液-碳纤维复合材料的制备与性能研究. 硕士学位论文, 大连理工大学, 2015.
[8] Miao X, Kong X, Jiang G. Industrial Textile, 2012, 43(2), 281.
[9] Lepore E, Bosia F, Bonaccorso F, et al. 2D Materials. 2018, 5(4), 049501.
[10] Laha A, Majumdar A. Materials & Design, 2016, 89, 286.
[11] Baharvandi H R, Saeedi H M, Kordani N, et al. The Journal of the Textile Institute, 2016, 108(3), 397.
[12] Haro E E, Szpunar J A, Odeshi A G. Composites Part A: Applied Science and Manufacturing, 2016, 87, 54.
[13] Dong-wook K, Satoshi K. Advanced Power Technology, 2018, 29(1), 168.
[14] Hoffman R. Theory and Experimental Tests, 1972, 16, 155.
[15] Brady J F. The Journal of Chemical Physics, 1989, 91, 1866.
[16] Srivastava A, Majumdar A, Butola B. Critical Reviews in Solid State and Materials Sciences, 2012, 37(2), 115.
[17] Gürgen S, Li W, Kuhan M C. Materials & Design, 2016, 104, 312.
[18] Majumdar S, Krishnaswamy R, Sood A K. Proceedings of the Nation Academy of Sciences of the United States of America, 2011, 108(22), 8996.
[19] Gurgen S, Li W H, Kushan M C. Materials & Design, 2016, 104, 312.
[20] Gurgen S, Kushan M C, Li W H. Korea-Australia Rheology Journal, 2016, 28(2), 121.
[21] Sun L, Zhu J, Wei M H, Zhang C W. Materials Research Express, 2018, 5(5), 025702.
[22] Dai L T, Maurin I, Foldyna M, et al. Nanotechnology, 2018, 29(43), 095201.
[23] Williams K R. Gupta K, Wasilik M. Journal of Microelectromechanical Systems, 2003, 12(6), 761.
[24] Zhang Y C, Zhu H Y, Huang J N, et al. Acta Physica Sinica, 2009, 58(S1), 292(in Chinese).
张迎晨, 朱海燕, 黄婧南, 等. 物理学报, 2009, 58(S1), 292.
[25] Hansen T S, West K, Hassager O, et al. Advanced Functional Materials, 2007, 17, 3069.
[26] Lei B H. Research on modified fibers and fabrics of silicon nanowires. Master’s Thesis, Southwest Petroleum University, China, 2016 (in Chinese).
雷兵航. 硅纳米线改性纤维和织物的研究. 硕士学位论文, 西南石油大学, 2016.
[27] Xie Y Y, Yang H L, Ruan J M. Materials Science and Engineering of Powder Metallurgy, 2010, 15(1), 1(in Chinese).
谢元彦, 杨海林, 阮建明. 粉末冶金材料科学与工程, 2010, 15(1), 1.
[28] Yu K J, Sha X F, Cao H J, et al. Glass Steel/Composite Material, 2012(6), 47(in Chinese).
俞科静, 沙晓菲, 曹海建, 等. 玻璃钢/复合材料, 2012(6), 47.
[29] Kang T J, Hong K H, Yoo M R. Fibers and Polymers, 2010, 11(5), 719.
[30] Kang T J, Kim C Y, Hong K H. Journal of Applied Polymer Science, 2012, 124(2), 1534.
[31] Hasanzadeh M, Mottaghitalab V. Journal of Materials Engineering and Performance, 2014, 23(4), 1182.
[32] Decker M J, Halbach C J, Nam C H, et al. Composites Science and Technology, 2007, 67, 565.
[33] Yu K J, Sha X F, Qian K, et al. Journal of Functional Materials, 2012, 43(23), 3300 (in Chinese).
俞科静, 沙晓菲, 钱坤, 等. 功能材料, 2012, 43(23), 3300.
[34] Sha X F. Preparation and properties research of shear thickening liquid. Master’s Thesis, Jiangnan University, China, 2014 (in Chinese).
沙晓菲. 剪切增稠液体的制备与性能研究. 硕士学位论文, 江南大学, 2014.
[35] Mahfuz H, Clements F, Rangari V. Journal of Applied Physics, 2009, 105(6), 064307.
[36] Laha A, Majumdar A. Materials & Design, 2016, 89, 286.
[37] Gurgen S, Kushan M C, Li W H. Progress in Polymer Science, 2017, 75, 48.
[38] Xu Y, Chen X G, Wang Y. S. Composite Structures, 2017, 163, 465.
[39] He Q Y, Cao S S, Wang Y P, et al. Composites Part A-Applied Science and Manufacturig, 2018, 106, 82.