自冲铆接头疲劳性能影响因素研究进展

doi:10.11896/cldb.18030256

Abstract
Figure/Table
References
Related Citation (10)

Download:

Full Text ( PDF ) (1525KB)
Export: BibTeX | EndNote (RIS)

Abstract Due to the demand of lightweight body in recent years, aluminium alloy structures and mixed-material structures are the development trend of body design and manufacture, and the problem of structure connection is also facing great challenges. Self-piercing riveting (SPR) is a cold mechanical joining process used to join two or more sheets of metal and nonmetallic materials by forming a mechanical interlock structure through rivet and sheet. Compared with other conventional joining methods, SPR has many advantages including no pre-drilled holes required, environmentally-friendly connection process, and the ability to join dissimilar sheets and nonmetallic sheets. At the same time, the joint has better sealing and mechanical properties. As a new type of joining method employs the connection of lightweight structure, SPR has been developed rapidly in recent years because of its unique advantages. Fatigue performance is a key index of engineering application of joint. The substrate materials studied are mainly used aluminum alloy and high strength steel. In recent years, the fatigue properties of SPR joints of titanium alloy and fiber reinforced composites have also been studied. There are many factors affecting the fatigue performance of SPR joint. The method of improving the fatigue performance of SPR joint and the fatigue fai-lure mechanism of the joint have always been the focus of the researchers. The factors that affect the fatigue performance of SPR joint include riveting process, substrate parameters, rivet distribution, joint lap form, fatigue loading parameters, test temperature and adding adhesive. A large number of researches mainly focus on the factors of riveting process, substrate parameters and rivet distribution. The results illustrate that the fatigue performance of the joint can be improved by using the high strength sheet as the lower sheet, increasing the thickness of the sheet and using the domed head rivet with high hardness. The increase of the number of rivets can significantly improve the fatigue performance of the joint, and the fatigue properties of the joints are affected by the distribution and edge distance of rivets. SPR joint existence the residual stress and fretting wear is the main cause of fatigue failure of mechanical connection. Stress annealing can improve the fatigue performance of the joint under high fatigue load. Adding lubricant coating on substrate sheet can also improve the fatigue performance of the joint. In addition, the adhesive bonded-SPR hybrid joints are widely used in body connection. Adhesive can reduce the stress concentration of joints and improve its fatigue properties. The fatigue test is time-consuming and high cost test. The factors affecting fatigue performance of SPR joint can be the reference for further research and engineering application. This review offers a retrospection of the research efforts with respect to the factors affecting the fatigue properties of SPR joint and summarizes the methods to improve the fatigue properties of joint, besides, the research direction of SPR is analyzed and prospected.

Key words： self-piercing riveting fatigue property influencing factors

Published: 21 May 2019

CLC number:

TH131.1

Fund:This work was financially supported by the National Natural Science Foundation of China (51775227, 51375201), National Key R & D Plan (2016YFB0101601), Special Project of Co-constructing by Jilin Province and the University (SXGJSF2017-2-1-5).

About author:: Yang Liu is currently pursuing his Ph.D. at the College of Automotive Engineering, Jilin University under the supervision of Prof. Weimin Zhuang. His research has focused on lightweight design of body structure.Weimin Zhuang received her Ph.D. degree in vehicle engineering from the College of Automotive Enginee-ring, Jilin University, in 2006. During the period from 2007 to 2008, she conducted a visiting study at Impe-rial College London, mainly engaged in the research work of lightweight design of body structure. She is currently a full professor in Jilin University.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Yang
	ZHUANG Weimin
	SHI Hongda

Cite this article:

LIU Yang,ZHUANG Weimin,SHI Hongda. Influencing Factors on Fatigue Performance of Self-piercing Riveted Joints: a Review[J]. Materials Reports, 2019, 33(11): 1825-1830.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18030256 OR http://www.mater-rep.com/EN/Y2019/V33/I11/1825

1 Wang W P, Wang X, Zhang Y Q. Journal of Chongqing University of Technology(Natural Science),2016,30(3),9(in Chinese).
王维平,王霄,张云清.重庆理工大学学报(自然科学版),2016,30(3),9.
2 Li Y, Li W C. Journal of Chongqing University of Technology (Natural Science),2018,32(12),7(in Chinese).
李勇,李文超.重庆理工大学学报(自然科学版),2018,32(12),7.
3 Mori K, Kato T, Abe Y, et al. CIRP Annals-Manufacturing Technology,2006,55(1),283.
4 Sun X, Stephens E V, Khaleel M A. International Journal of Fatigue,2007,29(2),370.
5 Mori K, Abe Y, Kato T. Journal of Materials Processing Technology,2012,212(9),1900.
6 He X C, Gu F S, Ball A. Progress in Materials Science,2014,65(10),1.
7 Li D, Chrysant A, et al. International Joumal of Advanced Manufacturing Technology,2017,92(5-8),1777.
8 He X C, Pearson I, Young K. Journal of Materials Processing Technology,2008,199(1),27.
9 He X C, Gu F S, Ball A. International Journal of Advanced Manufactu-ring Technology,2012,58(5-8),643.
10 Sui B, Du D, Chang B H, et al. Automotive Engineering,2006,28(1),85(in Chinese).
岁波,都东,常保华,等.汽车工程,2006,28(1),85.
11 Haque R. Archives of Civil & Mechanical Engineering,2018,18(1),83.
12 Xing B Y, He X C, Wang Y Q, et al. Journal of Materials Processing Technology,2015,216,28.
13 Hall S N V, Findley K O, Freis A. Journal of Materials Processing Technology,2018,251,350.
14 Zhang X L. Research on fretting and fatigue mechanism of self-piercing riveting in aerial light alloy sheets. Master’s Thesis, Kunming University of Science and Technology, China, 2017 (in Chinese).
张先炼.航空轻合金薄板自冲铆接微动疲劳机理研究.硕士学位论文,昆明理工大学,2017.
15 Gay A, Lefebvre F, Bergamo S, et al. International Journal of Fatigue,2016,83,127.
16 Chung C S, Kim H K. Fatigue & Fracture of Engineering Materials & Structures,2016,39(9),1105.
17 Sun X, Khaleel M A. Journal of Manufacturing Processes,2005,7(1),83.
18 Zhang L, He X C, Zhang X L, et al. Materials Review B: Research Papers,2017,31(6),72(in Chinese).
赵伦,何晓聪,张先炼,等.材料导报:研究篇,2017,31(6),72.
19 He X C, Zhao L, Deng C J, et al. Materials & Design,2015,65,923.
20 Zhang C Y, Gou R B, Yu M, et al. Journal of Iron and Steel Research International,2017,24(2),214.
21 Cheng Q, He X C, Xing B Y, et al. Materials Review B: Research Papers,2017,31(6),84(in Chinese).
程强,何晓聪,邢保英,等.材料导报:研究篇,2017,31(6),84.
22 Zhao L, He X C, Xing B Y, et al. Materials & Design,2015,87,1010.
23 Huang L, Bonnen J, Lasecki J, et al. International Journal of Fatigue,2016,83,230.
24 Zhao L, He X C, Xing B Y, et al. Journal of Materials Processing Technology,2017,249,246.
25 Iyer K, Brittman F L, et al. Fatigue & Fracture of Engineering Materials & Structures,2005,28(11),997.
26 Khanna S K, Long X, Krishnamoorthy S, et al. Science & Technology of Welding & Joining,2006,11(5),544.
27 Xing B Y, He X C, Zeng K, et al. International Journal of Advanced Manufacturing Technology,2014,75(1-4),351.
28 Xing B Y, He X C, Wang Y Q, et al. Transactions of the China Welding Institution,2016,37(6),50(in Chinese).
邢保英,何晓聪,王玉奇,等.焊接学报,2016,37(6),50.
29 Xing B Y, He X C, Tang Y, et al. Engineering Mechanics,2013,30(12),280(in Chinese).
邢保英,何晓聪,唐勇,等.工程力学,2013,30(12),280.
30 Huang Z C, Huang Q W, Li S J, et al. Forging & Stamping Technology,2017,42(9),150(in Chinese).
黄志超,黄秋雯,李绍杰,等.锻压技术,2017,42(9),150.
31 Li D, Han L, Thornton M, et al. Materials Science & Engineering A,2012,558(48),242.
32 Franco G D, Fratini L, Pasta A. Materials & Design,2012,35,342.
33 Kang S H, Kim H K. International Journal of Fatigue,2015,80,58.
34 Su Z M, Lin P C, Lai W J, et al. International Journal of Fatigue,2015,72,53.
35 Huang L, Shi Y, Guo H, et al. International Journal of Fatigue,2016,88,96.
36 Han L, Young K W, Chrysanthou A, et al. Advanced Materials Research,2006,6-8(10),157.
37 Haque R, Beynon J H, Durandet Y, et al. Science & Technology of Wel-ding & Joining,2012,17(1),60.
38 Haque R, Wong Y C, Paradowska A, et al. Advances in Materials Science and Engineering,2017,2017,1.
39 Huang L, Moraes J F C, Sediako D, et al. Journal of Manufacturing Science & Engineering,2017,139(2),021007-1.
40 Zhang X L, He X C, Xing B Y, et al. Materials & Design,2016,97,108.
41 Chen Y K, Han L, Chrysanthou A, et al. Wear,2003,255(7-12),1463.
42 Han L, Chrysanthou A, Young K W, et al. Fatigue & Fracture of Engineering Materials & Structures,2006,29(8),646.
43 Han L, Chrysanthou A, O’Sullivan J M. Materials & Design,2006,27(3),200.
44 Hunt C J J, Su X, Quinn A K K J, et al. Advanced Materials & Processes,2013,171(5),29.