| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Effect of Fly Ash and Slag on the Steel Bars Corrosion in Accelerated Carbonation Cured Mortars |
| SONG Baixing1,3,4,*, SHI Caijun2,*, KE Guojun1,4
|
1 Key Laboratary in Special High Performance Concrete of Hunan Province, College of Civil Engineering, University of South China, Hengyang 421001, Hunan, China 2 College of Civil Engineering, Hunan University, Changsha 410082, China 3 Department of Civil & Environmental Engineering, National University of Singapore, 117576, Singapore 4 Laboratory in high performance concrete of China nuclear construction, Hengyang 421001, Hunan, China |
|
|
|
|
Abstract Accelerated carbonation curing has attracted increasing attentions as its advantages such as decreasing the carbon footprint and enhancing the durability of cement-based materials. However, the effects of fly ash and slag on the durability of accelerated carbonation cured cement-based materials, in particular the corrosion behaviors of rebars is unclear yet. To systematically study the effects of fly ash and slag on the corrosion resistance of accelerated carbonation cured cement mortars, the corrosion behaviors of rebars were measured in three corrosion environments, including simulated pore solution, wetting-drying cycling in chloride ions solution as well as under the coupling action of stray current and chloride ions. The results show that the addition of fly ash and slag prolongs the time for the steel bars to form stable passive film and decreases the chloride threshold concentration in accelerated carbonation cured mortars. The reinforcement corrosion resistance of the accelerated carbonation cured mortars decreases with the increase of fly ash and/or slag content, especially when its dosage exceeds 25%.
|
|
Published: 10 January 2026
Online: 2026-01-09
|
|
|
|
|
1 Song B X, Shi C J, Hu X, et al. Construction and Building Materials, 2021, 288, 123113. 2 Shi C J, He F Q, Wu Y. Construction and Building Materials, 2012, 26(1), 257. 3 Rostami V, Shao Y, Boyd A J. Construction and Building Materials, 2011, 25(8), 3345. 4 Chang J, Gu Y, Ansari W S. Construction and Building Materials, 2020, 251, 118880. 5 Qin L, Gao X J. Waste Management, 2019, 89, 254. 6 Song B X, Liu S H, Hu X, et al. Cement and Concrete Composites, 2022, 134, 104786. 7 Zhang D, Shao Y. Journal of CO2 Utilization, 2018, 27, 137. 8 Wang L, Chen S S, Tsang D C W, et al. Journal CO2 Utilization, 2017, 18, 107. 9 Zhang D, Shao Y. Construction and Building Materials, 2016, 113, 134. 10 Xian X P, Zhang D, Lin H, et al. Journal CO2 Utilization, 2022, 56, 101861. 11 Song B X, Hu X, Pang S D, et al. Journal of Sustainable Cement-based Materials, 2024, 13, 1063. 12 Gieergiczny Z. Cement and Concrete Research, 2019, 124, 105826. 13 Thimas M D A, Hooton R D, Scoot A, et al. Cement and Concrete Research, 2012, 42(1), 1. 14 Choi Y, Kim J, Lee K. Corrosion Science, 2006, 48(7), 1733. 15 Song B X, Hu X, Liu S H, et al. Cement and Concrete Composites, 2022, 134, 104793. 16 Jiang F J. Electrochemical analysis of concrete cement hydration, chloride diffusion and steel corrosion. Ph. D. Thesis, Dalian University of Technology, China, 2020 (in Chinese). 姜凤娇. 混凝土水泥水化、氯离子扩散及钢筋锈蚀的电化学分析. 博士学位论文, 大连理工大学, 2020. 17 Montermor M F, SimeÕ A M P, Feffeira M G S. Cement and Concrete Composites, 2003, 25(4-5), 491. 18 Cao C N. Principles of electrochemistry of corrosion, Chemical Industry Press, China, 2008, pp. 75 (in Chinese). 曹楚南. 腐蚀电化学原理, 化学工业出版, 2008, pp. 75. 19 Moreno M, Morris W, Alvarez M G, et al. Corrosion Science, 2004, 46(11), 2681. 20 Williamson J, Isgor O B. Corrosion Science, 2016, 106, 82. 21 Song H W, Ann K Y. Corrosion Science, 2007, 49, 4113. 22 Shi C J, Hu S. Cement and Concrete Research, 2003, 33(11), 1851. 23 Geng J. The research on the deteriorated mechanism of reinforced concrete in stray currents and chloride ion coexisted corrosion environment. Ph. D. Thesis, Wuhan University of Technology, China, 2008 (in Chinese). 耿健. 杂散电流与氯离子共存环境下钢筋混凝土劣化机理的研究. 博士学位论文, 武汉理工大学, 2008. 24 Du F Y, Jin Z Q, She W, et al. Construction and Building Materials, 2020, 263, 12099. |
|
|
|