基于几何优化的复合材料胶接接头强度改进的研究进展

doi:10.11896/cldb.23090088

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2584KB)
Export: BibTeX | EndNote (RIS)

Abstract With the growing demand for lightweight structures, composite materials are increasingly used in aviation, shipbuilding, automobiles, constructions, sports equipment and other fields. The connection methods of composite materials mainly include mechanical bonding and adhesive bonding. As an efficient and reliable connection method, adhesive bonding is particularly important in the connection of composite mate-rials and is an indispensable part. Due to the widespread use of adhesive joints in highly load-bearing structures, there is a growing demand for higher strength, longer life, and lower cost of these joints. By reviewing the latest research progress in improving the strength of composite adhesive joints, this summary discussed and compared the geometric optimization methods of existing composite adhesive structures, comprehensively analyzed the influence of various geometric factors on the strength of adhesive joints, including optimizing the overall and local structural design of adhesive joints, adjusting the stress mode and distribution of joints, reducing stress concentration in adhesive structures, and thereby improving the strength of adhesive joints. Finally, summarizing the prominent characteristics and limitations of these geometric methods to improve the efficiency of adhesive joint. This paper is helpful to expand the application of adhesive joints, and promote the development of composite material connection technology.

Key words： composite material bonded joint structural geometry optimization bonding strength

Published: 25 December 2024 Online: 2024-12-20

CLC number:

TB333

Fund:National Natural Science Foundation of China (11204158),Modern Manufacturing Quality Engineering Hubei Provincial Key Laboratory 2022 Laboratory Open Fund (KFJJ-2022008),and Hubei University of Technology Doctoral Research Initiation Fund (XJ2021006201).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XU Yuqiong
	ZHONG Zishan
	ZHENG Qiansong

Cite this article:

XU Yuqiong,ZHONG Zishan,ZHENG Qiansong. Research Progress on Improving the Strength of Composite Adhesive Joint Based on Geometric Optimization[J]. Materials Reports, 2024, 38(24): 23090088-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23090088 OR http://www.mater-rep.com/EN/Y2024/V38/I24/23090088

1 Zou T C, Fu J, Ju L Z, et al. Materials Reports, 2023, 37(11), 163 (in Chinese).
邹田春, 符记, 巨乐章, 等. 材料导报, 2023, 37(11), 163.
2 Shang X L. Investigation and optimization of the load capacity of adhesive single-lap joints with composite adherends. Ph. D. Thesis, National University of Defense Technology, China, 2021 (in Chinese).
尚新龙. 复合材料单搭接胶接连接的承载性能分析与优化设计. 博士学位论文, 国防科技大学, 2021.
3 Han Z J, Zhou J Y, Zhang B L, et al. Machinery Design ＆ Manufacture 2023, 385(3), 63 (in Chinese).
韩子健, 周金宇, 庄百亮, 等. 机械设计与制造, 2023, 385(3), 63.
4 Budhe S, Banea M D, De Barros S, et al. International Journal of Adhesion and Adhesives, 2017, 72, 30.
5 Navarro R B. Plasma pre-treatment for adhesive bonding of aerospace composite components. Master’s Thesis, Brunel University London, 2016.
6 Banea M D, Da Silva L F M. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2009, 223(1), 1.
7 Song C Y, Jing J Y, Zhao M, et al. Chemistry and Adhesion, 2023, 45(2), 119(in Chinese).
宋彩雨, 景君怡, 赵明, 等. 化学与粘合, 2023, 45(2), 119.
8 Schweizer M, Meinhard D, Ruck S, et al. Journal of Adhesion Science and Technology, 2017, 31(23), 2581.
9 Ozel A, Yazici B, Akpinar S, et al. Composites Part B: Engineering, 2014, 62, 167.
10 Neto J, Campilho R D S G, Da Silva L F M. International Journal of Adhesion and Adhesives, 2012, 37, 96.
11 Yang B N, Zheng Y P, Li C, et al. Fiber Reinforced Plastics/Compo-sites, 2019(2), 26 (in Chinese).
杨本宁, 郑艳萍, 李成, 等. 玻璃钢/复合材料, 2019(2), 26.
12 Liang Z D, Yan Y, Zhang T T, et al. Journal of Beihang University of Aeronautics and Astronautics, 2014, 40(12), 1786(in Chinese).
梁祖典, 燕瑛, 张涛涛, 等. 北京航空航天大学学报, 2014, 40(12), 1786.
13 Chen Q, Du B, Zhang X, et al. Materials, 2022, 15(22), 8013.
14 Wang D W, Qin J X, Li L H, et al. Plastics, 2020, 49(3), 90 (in Chinese).
王大伟, 秦嘉徐, 李龙辉, 等. 塑料, 2020, 49(3), 90.
15 Zou T C, Ju L Z, Guan Y X, et al. Acta Aeronautica et Astronautica Sinica, 2023, 44(18), 292 (in Chinese).
邹田春, 巨乐章, 管玉玺, 等. 航空学报, 2023, 44(18), 292.
16 Xiao X, Yue T, Zhang T S. Composites Science and Engineering, 2023(12), 28 (in Chinese).
肖潇, 岳涛, 张铁山. 复合材料科学与工程, 2023(12), 28.
17 Xiong D J. A study on adhesive strength of single lap structural adhesive join of glass fiber reinforced composites. Master’s Thesis, Changsha University, China, 2018 (in Chinese).
熊东箭. 玻纤增强复合材料单搭接胶接接头强度研究. 硕士学位论文, 长沙大学, 2018.
18 Feng C, Zhao G H. China Plastics, 2021, 35(11), 144 (in Chinese)
冯闯, 赵广慧. 中国塑料, 2021, 35(11), 144.
19 Lou S M, Ren G D, Yang Z S, et al. Composites Science and Engineering, 2022(11), 35 (in Chinese).
娄淑梅, 任国栋, 杨振三, 等. 复合材料科学与工程, 2022(11), 35.
20 Kim K S, Yi Y M, Cho G R, et al. Composite Structures, 2008, 82(4), 513.
21 Liu J M, Quan D, Zhao G Q. Journal of Mechanical Engineering, 2023, 59(20), 119 (in Chinese).
刘嘉鸣, 全东, 赵国群. 机械工程学报, 2023, 59(20), 119.
22 Ye F. Researches about the bonding performance of Carbon fiber laminated plates. Master’s Thesis, North University of China, China, 2015 (in Chinese).
叶斐. 碳纤维层合板胶接性能研究. 硕士学位论文, 中北大学, 2015.
23 Guo S. Study of the mechanical performance and analysis of the failure behavior for adhesivly bonded joints between CFRP and steel DC04. Master’s Thesis, Hunan University, China, 2017 (in Chinese).
郭帅. CFRP与DC04钢胶接接头力学性能研究与失效行为分析. 硕士学位论文, 湖南大学, 2017.
24 Shang X, Marques E A S, Machado J J M, et al. Composites Part B: Engineering, 2019, 177, 107363.
25 Wang S X, Shang X L, Ju S, et al. Fiber Reinforced Plastics/Composites, 2017, 286(11), 95 (in Chinese).
王树鑫, 尚新龙, 鞠苏, 等. 玻璃钢/复合材料, 2017, 286(11), 95.
26 Mao Z G, Hou Y L, Li C, et al. Acta Materiae Compositae Sinica, 2020, 37(1), 121(in Chinese).
毛振刚, 侯玉亮, 李成, 等. 复合材料学报, 2020, 37(1), 121.
27 Zhao M M, Hu Y F, Zhang J G, et al. Digital Manufacture Science, 2020, 18(1), 91 (in Chinese).
赵明明, 胡业发, 张锦光, 等. 数字制造科学, 2020, 18(1), 91.
28 Hu C X, Hou Y L, Tie Y, et al. Journal of Mechanical Engineering, 2021, 57(8), 154(in Chinese).
胡春幸, 侯玉亮, 铁瑛, 等. 机械工程学报, 2021, 57(8), 154.
29 Razavi S M J, Berto F, Peron M, et al. Theoretical and Applied Fracture Mechanics, 2018, 93, 44.
30 Fessel G, Broughton J, Fellows N, et al. In:48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Waikiki, 2007, pp.2192.
31 You M, Yu S, Yu H Z, et al. Key Engineering Materials, 2007, 348, 273.
32 Bodepudi R, Hughes D J, Pradhan A K. International Journal of Adhesion and Adhesives, 2017, 77, 78.
33 Nosouhi F, Farahani M, Ansari M. Journal of Adhesion Science and Technology, 2018, 32(9), 1007.
34 Luo W, Ma J, Chen Z L et al. China Adhesives, 2019, 28(8), 34(in Chinese).
罗威, 马娇, 陈正龙, 等. 中国胶粘剂, 2019, 28(8), 34.
35 Kishore A N, Prasad N S. International Journal of Adhesion and Adhesives, 2012, 35, 55.
36 Ashrafi M, Ajdari A, Rahbar N, et al. International Journal of Adhesion and Adhesives, 2012, 32, 46.
37 Khalid A A. Key Engineering Materials, 2020, 858, 20.
38 Campilho R D S G, De Moura M F S F, Domingues J J M S. Journal of Adhesion Science and Technology, 2007, 21(9), 855.
39 Yoo J S, Truong V H, Park M Y, et al. Composite Structures, 2016, 140, 417.
40 Li J, Yan Y, Liang Z, et al. The Journal of Adhesion, 2016, 92(1), 1.
41 Sonat E, Özerinç S. Composite Structures, 2021, 258, 113205.
42 Da Silva L F M, Öchsner A, Adams R D. Handbook of adhesion technology, Springer Science & Business Media, Germany, 2011, pp.787.
43 Se Souze G, Anjoletto D P T, Ferreira T R M, et al. Macromolecular Symposia, 2019, 383(1), 1800007.
44 Das S, Gillespie J J W, Shenton III H, et al. In: Society for the advancement of material and process engineering conference, North America, 2023.
45 Kim J H, Park B J, Han Y W. Composite Structures, 2004, 66(1-4), 69.
46 Brito R F N, Campilho R, Moreira R D F, et al. Procedia Structural Integrity, 2021, 33, 665.
47 Wu C, Chen C, He L, et al. Composites Part B: Engineering, 2018, 155, 19.
48 Ejaz H, Hkan H Y, Mazhar F A, et al. Forces in Mechanics, 2022, 9, 100144.
49 Li B, Zhao M Y, Wan X P. Advances in Aeronautical Science and Engineering, 2013, 4(2), 170 (in Chinese).
李波, 赵美英, 万小朋. 航空工程进展, 2013, 4(2), 170.
50 Yousefi K A, Green S, Hou X, et al. Journal of Adhesion Science and Technology, 2021, 35(17), 1821.
51 Da Silva L F M, Öchsner A. Modeling of adhesively bonded joints, Berlin: Springer, Germany, 2008, pp.132.
52 Moya-Sanz E M, Ivañez I, Garcia-Castillo S K. International Journal of Adhesion and Adhesives, 2017, 72, 23.
53 Haghani R, Al-Emrani M, Kliger R. Journal of Composite Materials, 2010, 44(3), 287.
54 Deng J, Lee M M. Composites Part B: Engineering, 2008, 39(4), 731.
55 Amaro A M, Neto M A, Loureiro A, et al. Theoretical and Applied Fracture Mechanics, 2018, 96, 231.
56 Hildebrand M. International Journal of Adhesion and Adhesives, 1994, 14(4), 261.
57 Li S, Liu W, Sun W, et al. Engineering Fracture Mechanics, 2023, 281, 109141.
58 Beigrezaee M J, Ayatollahi M R, Bahrami B, et al. The Journal of Adhesion, 2020, 97(11), 1004.
59 Matveenko V P, Sevodina N V, Fedorov A Y. Journal of Applied Mechanics and Technical Physics, 2013, 54(5), 841.
60 Tsai M, Morton J. Composite Structures, 1995, 32(1-4), 123.
61 Noureddine D, Benali B, Rachid H B, et al. Engineering Structures, 2022, 256, 114049.
62 Xu Y Q. Adhesion, 2016, 37(6), 67 (in Chinese).
徐喻琼. 粘接, 2016, 37(6), 67.
63 Lang T P, Mallick P. International Journal of Adhesion and Adhesives, 1998, 18(3), 167.
64 Kim K S, Yoo J S, Yi Y M, et al. Composite Structures, 2006, 72(4), 477.
65 Du Z X, Gao Z Z, Yue Z F. Journal of Mechanical Strength, 2008, 30(5), 839(in Chinese).
杜正兴, 高宗战, 岳珠峰. 机械强度, 2008, 30(5), 839.
66 Zheng G, Liu C, Han X, et al. International Journal of Adhesion and Adhesives, 2020, 99, 102590.
67 Kaiser I, Tan K T. International Journal of Adhesion and Adhesives, 2020, 103, 102710.
68 Zheng X L, Na R S, You M, et al. Journal of China Three Gorges University (Natural Science) , 2001, 23(6), 530 (in Chinese).
郑小玲, 娜日松, 游敏, 等. 三峡大学学报(自然科学版), 2001, 23(6), 530.
69 Belingardi G, Goglio L, Tarditi A. International Journal of Adhesion and Adhesives, 2002, 22(4), 273.
70 Desai C R, Patel D C, Desai C K. Materials Today: Proceedings, DOI: 10. 1016/j. matpr. 2023. 04. 026.
71 Zhao X, Adams R, Da Silva L F M. Journal of Adhesion Science and Technology, 2011, 25(8), 819.
72 Zhao X, Adams R, Da Silva L F M. Journal of Adhesion Science and Technology, 2011, 25(8), 837.