| PROCESSING AND PROPERTY REGULATION OF ADVANCED NONFERROUS METAL MATERIAL |
|
|
|
|
|
| Progress in the Preparation Methods and Mechanical Properties of Gradient-Structured Metallic Materials |
| GAO Ruize1, WANG Yaqiang1,*, ZHANG Jinyu1, YANG Hongyan2, LIU Gang1, SUN Jun1
|
1 State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China
2 Science and Technology on Reactor Fuel and Materials Laboratory, Nuclear Power Institute of China, Chengdu 610213, China |
|
|
|
|
Abstract Structural metal materials are the foundation for guaranteeing the rapid development of national defense construction, aerospace, and mechanical engineering fields. Introducing the gradient microstructure into it could make the structural units with different size produce mutual coordination, breaking through the performance shortcomings of the homogeneous materials and effectively improving the comprehensive service properties of metal materials. Focused on the domestic and international investigations and progress of gradient-structured metal materials in recent years, this paper firstly introduced the preparation methods and the process principles with summarizing their advantages and limitations for gradient-structured metals. Then, the microstructure of gradient-structured metals was analyzed, and the characteristics of service performance were discussed, including the strength, plasticity, friction and wear property, fatigue damage performance and corrosion resistance. Moreover, some optimization strategies were proposed for manipulating the service performance of gradient-structured materials. Finally, the development of future research direction and the faced challenges were prospected.
|
|
Published: 10 August 2024
Online: 2024-08-29
|
|
|
| Fund:National Natural Science Foundation of China (92163201,U2067219,52001247) and Shaanxi Province Youth Innovation Team Project (22JP042), Shaanxi Province Youth Innovation Team (22JP042), and Shaanxi Province Innovation Team Project (2024RS-CXTD-58). |
|
|
1 Cao P. Nano Letters, 2020, 20(2), 1440.
2 Yang H, Lavernia E J, Schoenung J M. Philosophical Magazine Letters, 2015, 95(3), 177.
3 Embury D, Bouaziz O. Annual Review of Materials Research, 2010, 40(1), 213.
4 Koch C C, Morris D G, Lu K, et al. Mrs Bulletin, 1999, 24(2), 54.
5 Lu K. Science, 2010, 328(5976), 319.
6 Li Y. Materials China. 2016, 35(9), 658(in Chinese).
李毅. 中国材料进展, 2016, 35(9), 658.
7 Cheng Z, Zhou H, Lu Q, et al. Science, 2018, 362(6414), eaau1925.
8 Wang Y F, Huang C X, Wang M S, et al. Scripta Materialia, 2018, 150, 22.
9 Li X, Lu L, Li J, et al. Nature Reviews Materials, 2020, 5(9), 706.
10 Fang T H, Li W L, Tao N R, et al. Science, 2011, 331(6024), 1587.
11 Yan J H, Du Y F, Feng Y L. Journal of Plasticity Engineering, 2022, 29(5), 13 (in Chinese).
闫佳鹤, 杜一飞, 冯运莉. 塑性工程学报, 2022, 29(5), 13.
12 Lee H H, Yoon J I, Park H K, et al. Acta Materialia, 2019, 166, 638.
13 Wu S W, Wang G, Wang Q, et al. Acta Materialia, 2019, 165, 444.
14 Lu K. Nature Reviews Materials, 2016, 1(5), 1.
15 Suresh S. Science, 2001, 292(5526), 2447.
16 He X M, Zhu X Y, Dong J, et al. Hot Working Technology, 2009, 38(22), 56 (in Chinese).
何晓梅, 朱晓雅, 董洁, 等. 热加工工艺, 2009, 38(22), 56.
17 Zhang Q X, Yang X C, Li C J. Hot Working Technology, 2016, 45(2), 3 (in Chinese).
张淇萱, 杨新诚, 李才巨. 热加工工艺, 2016, 45(2), 3.
18 Zhou X, Li X Y, Lu K. Scripta Materialia, 2018, 153, 6.
19 Fang T H, Li W L, Tao N R, et al. Science, 2011, 331(6024), 1587.
20 Lu K, Lu J. Journal of Materials Science & Technology , 1999(3), 5.
21 Li X, Lu L, Li J, et al. Nature Reviews Materials, 2020, 5(9), 706.
22 Lu K. Acta Metallurgica Sinica, 2015, 51(1), 1 (in Chinese).
卢柯. 梯度纳米结构材料. 金属学报, 2015, 51(1), 1.
23 Chui P, Sun K, Sun C, et al. Materials & Design, 2012, 35, 754.
24 Li J, Weng G J, Chen S, et al. International Journal of Plasticity, 2017, 88, 89.
25 Yang K, Zhao J F, He F, et al. Surface Technology, 2022, 51(11), 58 (in Chinese).
杨康, 赵建锋, 何风, 等. 表面技术, 2022, 51(11), 58.
26 Chen A, Wang C, Jiang J, et al. Nanomaterials, 2021, 11(6), 1624.
27 Qin Z, Li B, Zhang H, et al. Aeronautical Manufacturing Technology, 2022, 65(15), 41 (in Chinese).
秦志, 李斌, 张涵, 等. 航空制造技术, 2022, 65(15), 41.
28 Liu X C, Zhang H W, Lu K. Scripta Materialia, 2015, 95, 54.
29 Xu W, Liu X C, Lu K. Acta Materialia, 2018, 152, 138.
30 Tu T, Tian J, Li J Z, et al. Foundry Technology, 2022(2), 43 (in Chinese).
屠涛, 田军, 李积珍, 等. 铸造技术, 2022(2), 43.
31 Han K, Li X, Liu X, et al. Materials Science and Engineering: A, 2022, 832, 142391.
32 Nalla R K, Altenberger I, Noster U, et al. Materials Science and Engineering: A, 2003, 355(1-2), 216.
33 Dong G S, Gao B, Wang Z B. International Journal of Fatigue, 2023, 168, 107425.
34 Carneiro L, Wang X, Jiang Y. International Journal of Fatigue, 2020, 134, 105469.
35 Huang H W, Wang Z B, Lu J, et al. Acta Materialia, 2015, 87, 150.
36 Gu J, Guo L, Gan B, et al. Materials Science and Engineering: A, 2021, 802, 140676.
37 Yang L, Chen Z, Ma X, et al. Materials Science and Engineering: A, 2021, 826, 141980.
38 Ding Z, Yuan Q, Wang H, et al. Ceramics International, 2023, 49(1), 154.
39 Li J, Lu W, Gibson J, et al. Scientific Reports, 2018, 8(1), 1.
40 Bathini L, Prasad M, Wasekar N P. Surface and Coatings Technology, 2022, 445, 128728.
41 Zhang Z, Xu Z, Liao Z, et al. Materials Letters, 2022, 312, 131681.
42 Cui C, Wang X M, Wu B, et al. Aeronautical Manufacturing Technology, 2018, 61(10), 74 (in Chinese).
崔灿, 王向明, 吴斌, 等. 航空制造技术, 2018, 61(10), 74.
43 He B, Shao Z C, Sun C Q. Hot Working Technology, 2021(22), 050 (in Chinese).
何波, 邵志诚, 孙长青. 热加工工艺, 2021(22), 050.
44 Qin L Y, Wang W, Yang G, et al. Functional Materials, 2013, 44(B06), 94 (in Chinese).
钦兰云, 王维, 杨光, 等. 功能材料, 2013, 44(B06), 94.
45 Lou S, Li Y, Zhou L, et al. Materials & Design, 2016, 104, 320.
46 Lainé S J, Knowles K M, Doorbar P J, et al. Acta Materialia, 2017, 123, 350.
47 Ren X D, Zhou W F, Liu F F, et al. Applied Surface Science, 2016, 363, 44.
48 He D, Li L, Zhang Y, et al. Journal of Alloys and Compounds, 2023, 935, 168139.
49 Lv L Q, Wang Y C, Li H, et al. Metallurgical Engineering, 2015, 2(2), 98.
50 Azushima A, Kopp R, Korhonen A, et al. CIRP Annals, 2008, 57(2), 716.
51 Wei L J, Yang S Z, Xia W J, et al. Journal of Mechanical Engineering Materials, 2012, 36(11), 14 (in Chinese).
魏琳俊, 杨寿智, 夏伟军, 等. 机械工程材料, 2012, 36(11), 14.
52 Ma X, Huang C, Moering J, et al. Acta Materialia, 2016, 116, 43.
53 Zhang L, Chen Z, Wang Y, et al. Scripta Materialia, 2017, 141, 111.
54 Zhao S, Kad B, Wehrenberg C E, et al. Proceedings of the National Academy of Sciences, 2017, 114(37), 9791.
55 Li X D. Microstructure design and strengthening-toughening mechanism of multiscale-structured alloys. Master’s Thesis, North China University of Science and Technology, China, 2020 (in Chinese).
李旭东. 合金多尺度微观结构设计与强韧化机理研究. 硕士学位论文, 华北理工大学, 2020.
56 Li X, Liu Y, Cui Y, et al. Journal of Alloys and Compounds, 2023, 955, 170053.
57 Hu J, Gao H, Meng Y, et al. Materials Science and Engineering: A, 2018, 726, 215.
58 Tripathi A, Tewari A, Kanjarla A K, et al. Metallurgical and Materials Transactions A, 2016, 47, 2201.
59 Lin T, Chang T, Xie Q, et al. Materials Characterization, 2022, 191, 112114.
60 Lei Y B, Wang Z B, Zhang B, et al. Acta Materialia, 2021, 208, 116773.
61 Lu K. Science, 2014, 345(6203), 1455.
62 Chen Z G, Wu Y L, Xue Q X, et al. Surface Technology, 2022, 51(7), 343 (in Chinese).
陈正阁, 武永丽, 薛全喜, 等. 表面技术, 2022, 51(7), 343.
63 Li X, Nakatani M, Yang J, et al. Journal of Alloys and Compounds, 2022, 890, 161835.
64 Shi Y, Wang Y, Shang W, et al. Materials Science and Engineering:A, 2021, 811, 141053.
65 Zhu Y, Wu X. Materials Research Letters, 2019, 7(10), 393.
66 Wang Y F, Huang C X, Fang X T, et al. Scripta Materialia, 2020, 174, 19.
67 Zhang X, Jia Z, Liu T, et al. Materials Science and Engineering:A, 2022, 860, 144268.
68 Lu J Z, Duan H F, Luo K Y, et al. Journal of Alloys and Compounds, 2017, 698, 633.
69 Sun Q, Sun J, Fu Y, et al. Materials, 2022, 15(21), 7687.
70 Wu X L, Jiang P, Chen L, et al. Materials Research Letters, 2014, 2(4), 185.
71 Zhao J, Lu X, Yuan F, et al. International Journal of Plasticity, 2020, 125, 314.
72 Martínez-Paeda E, Deshpande V S, Niordson C F, et al. Journal of the Mechanics and Physics of Solids, 2019, 126, 136.
73 Wu X L, Jiang P, Chen L, et al. Proceedings of the National Academy of Sciences, 2014, 111(20), 7197.
74 Zhang Z, Sheng H, Wang Z, et al. Nature Communications, 2017, 8(1), 14390.
75 Chen X, Han Z, Li X, et al. Science Advances, 2016, 2(12), e1601942.
76 Du X H, Li W P, Chang H T, et al. Nature Communications, 2020, 11(1), 2390.
77 Yang X, Zhang J, Gong Y, et al. Materials Science and Engineering: A, 2020, 789, 139619.
78 Bernoulli D, Cao S C, Lu J, et al. Surface and Coatings Technology, 2018, 339, 14.
79 Zheng L Q, Principles of tribology, Higher Education Press, China, 1994, pp. 371 (in Chinese).
郑林庆. 摩擦学原理, 高等教育出版社, 1994, pp. 371.
80 Zhao K, Aghababaei R. Journal of the Mechanics and Physics of Solids, 2020, 143, 104069.
81 Wang H, Gee M, Qiu Q, et al. Journal of Materials Science & Technology, 2019, 35(11), 2435.
82 Konyashin I, Ries B. Materials Letters, 2019, 253, 128.
83 Wang Z B, Lu J, Lu K. Surface and Coatings Technology, 2006, 201(6), 2796.
84 Lv X R, Wang S G, Liu Y, et al. Wear, 2008, 264(7-8), 535.
85 Zhang Y S, Han Z, Wang K, et al. Wear, 2006, 260(9-10), 942.
86 Zhou L, Liu G, Han Z, et al. Scripta Materialia, 2008, 58(6), 445.
87 Pandey V, Chattopadhyay K, Srinivas N C S, et al. Procedia Structural Integrity, 2016, 2, 3288.
88 Roland T, Retraint D, Lu K, et al. Scripta Materialia, 2006, 54(11), 1949.
89 Ho H S, Lv C, Zhou W, et al. Fatigue & Fracture of Engineering Materials & Structures, 2022, 45(6), 1818.
90 Liu Z, Zhang H, Yan Z, et al. Materials Science and Engineering:A, 2021, 822, 141669.
91 Li X, Sun B H, Guan B, et al. International Journal of Fatigue, 2021, 146, 106142.
92 Pan Q, Lu L. Scripta Materialia, 2020, 187, 301.
93 Lv J L, Luo H Y. Surface and Coatings Technology, 2013, 235, 513.
94 Lei J I N, Cui W, Xiu S, et al. Transactions of Nonferrous Metals Society of China, 2014, 24(8), 2529.
95 Feng B, Yan C, Feng X, et al. Materials Research Express, 2020, 7(10), 106511.
96 Shen P, Zhang B, Li Z, et al. Journal of Alloys and Compounds, 2023, 933, 167800.
97 Sun Q, He J, Chen J, et al. npj Materials Degradation, 2022, 6(1), 64.
98 Liu X, Sun W, Dong Y, et al. Journal of Materials Research, 2019, 34(6), 1064. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2024, Vol. 38 
