Materials Reports  2019, Vol. 33 Issue (z1): 440-443 |
| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Comparison of Chromium Plating Standards for RCC-M F5100 and AMS 2460 Applied to Nuclear Island Main Equipment |
| WANG Fang, JIANG En, MI Dawei
|
| Shanghai No.1 Machine Tool Works Co. Ltd.,Shanghai 201308 |
|
|
|
|
Abstract Some parts of nuclear island main equipment are under high temperature and high pressure. In order to ensure the service life of these parts, hard chromium shall be plated on the wear-resistant surface and bite-proof surface. The reference documents for hard chromium plating on such parts are RCC-M F5100 or AMS 2460. There are some differences between the two standards for chromium plating and coating examination. By comparing the differences of chromium plating and coating testing between the two standards, this paper provides a reference for the establishment of chromium plating standard for nuclear island main equipment.
|
|
Published: 05 July 2019
|
|
|
| About author:: Fang Wang, received her Ph.D. degree in material science in 2008 from Shanghai Jiaotong University. She is currently in charge of surface treatment of nuclear power products as a major vice chief engineer in Shanghai No.1 Machine Tool Works Co. Ltd. |
|
|
1 Lindsay J H. Plating and Surface Finishing,1999,86(11),40.
2 柳木桐, 刘建华, 钟平. 科技导报,2010,28(9),112.
3 王家贵. 机械工程师,2013(5),229.
4 任雪峰, 杨培霞, 刘安敏, 等. 化学通报,2013,76(1),39.
5 王方, 夏荣芳, 龚宏伟. 第二届核电站材料与可靠性国际研讨会, 沈阳,2011.
6 张新国. 冷热工艺,2013(5),19.
7 AMS 2460, Plating chromium, SAE,2007.
8 RCC-M F5100, Chromium Plating, AFCEN,2007.
9 孙化松, 屠振密, 李永彦, 等. 材料保护,2010,43(1),25.
10 屠振密, 郑剑、李宁, 等. 表面技术,2007,36(5),59.
11 王宗雄, 王超. 专家论坛,2014(2),5.
12 王文忠. 电镀与环保,2015,35(6),50.
13 何生龙.电镀与环保,1992,12(2),1.
14 刘俊莲, 陈华三, 江冰. 电镀与涂饰,2013,32(7),14.
15 赵黎云, 钟丽萍, 黄逢春. 电镀与精饰, 2001, 23(5), 9.
16 谢洪波, 张来祥, 马学奎. 材料保护,2006,39(9),31.
17 李寒松, 王栋梁, 朱增伟, 等. 电加工与模具,2015(2),61.
18 AMS 2759/9, Hydrogen embrittlement relief (Baking) of steel parts, SAE,2003.
19 ASTM E 384, Test method for microhardness of materials, ASTM International,2011.
20 ASTM B 571, Qualitative adhesion of metallic coatings, ASTM International,2003.
21 ASTM F 519, Mechanical hydrogen embrittlement testing of plating processes and service environments, ASTM International,2003. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
