| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Enhancing the Mechanical Properties of Al-Si Alloy Fabricated by Selective Laser Melting by Doping Trace Rare Earth Elements |
| SHI Qifeng1, YANG Tao1, QI Liang1, HAO Jingyan1, WU Huishu1,2,*, LI Runxia3
|
1 School of Mechanical Engineering, Tongling University, Tongling 244002, Anhui, China
2 College of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China
3 School of Materials Science and Engineering, Dongguan University of Technology, Dongguan 523808, Guangdong, China |
|
|
|
|
Abstract To address the persistent challenges in selective laser melting (SLM) processing of AlSi10Mg alloy (inherent limitations of high laser reflectivity in AlSi10Mg powder and sub-optimal mechanical properties), an AlSi10Mg-Er alloy was designed with rare earth element Er as an additive. The microstructure and mechanical behavior of the AlSi10Mg-Er alloy were investigated systematically. Results revealed that the incorporation of Er substantially improves laser energy absorption in AlSi10Mg powder, resulting in an increase in the molten pool temperature. This thermal enhancement generates an increased undercooling, thereby amplifying the solidification driving force and facilitating significant grain refinement. In addition, Er distributed along the boundaries of the network-like Si phase as Al3Er precipitates, which act as heterogeneous nucleation sites to refine the grain and have a pinning effect through dispersion strengthening. Notably, the addition of Er was also observed to refine the continuous network structure of the Si phase, resulting in a more fragmented morphology. Under the synergistic effects of grain refinement and precipitation strengthening (Al3Er and Si precipitates), the mechanical properties have improved remarkably. Tensile testing demonstrates concurrent enhancement of strength and ductility, with ultimate tensile strength and elongation increasing by 9.5% and 9.3%, respectively. Compressive strength also shows a 4.6% improvement.
|
|
Published: 25 February 2026
Online: 2026-02-13
|
|
|
|
|
1 Eric M D, Ryan W. Science, 2016, 353(6307), 2093.
2 Yang Y Q, Wu W H, Lai K X, et al. Aeronautical Manufacturing Technology, 2006(2), 73(in Chinese).
杨永强, 吴伟辉, 来克娴, 等. 航空制造技术, 2006(2), 73.
3 Zhang Y Y. Study on laser selective melting forming of AlSi10Mg alloy and composite materials. Master’s Thesis, Shandong University, China, 2020(in Chinese).
张玉莹. 激光选区熔化成形AlSi10Mg合金及复合材料的研究. 硕士学位论文, 山东大学, 2020.
4 Yu K B. Study on microstructure and mechanical properties of AlSi10Mg alloy formed by laser selective melting. Master’s Thesis, South China University of Technology, China, 2018 (in Chinese).
余开斌. 激光选区熔化成形AlSi10Mg合金的显微组织与力学性能研究. 硕士学位论文, 华南理工大学, 2018.
5 Pozdniakov A V, Churyumov Y A, Loginova I S, et al. Material Letters, 2018, 225(15), 33.
6 Zhang C Y, Liu X B, Zhang F Z, et al. Journal of Materials Engineering, 2025, 53(8), 58 (in Chiness).
张楚怡, 刘秀波, 张飞志, 等. 材料工程, 2025, 53(8), 58.
7 Li S S, Han S, Hu X G, et al. Additive Manufacture, 2020, 34, 101326.
8 Zhe F, Wang X, Tan H, et al. Material Science and Engineering A, 2022, 855, 143932.
9 Li M G, Sun M Y, Chen C Z, et al. Journal of Materials Engineering, 2024, 52(9), 133 (in Chinese).
李明高, 孙梅玉, 陈朝中, 等. 材料工程, 2024, 52(9), 133.
10 Zhang J, Feng J, Zuo L, et al. Material Science and Engineering A, 2019, 766, 138343.
11 Spierings A B, Dawson K, Kern K, et al. Material Science and Enginee-ring A, 2017, 701, 264.
12 Guo Y W, Wei W, Shi W, et al. Material Science and Engineering A, 2022, 842, 143085.
13 Zhang Y, Gao K Y, Wen S P, et al. Journal of Alloys and Compounds, 2014, 610, 27. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2026, Vol. 40 
