INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
The Effect of Curing Regime on the Dynamic and Static Mechanical Properties of Ultra-high Performance Concrete with Addition of Nano-SiO2 |
LIU Xiaonan1,2, ZHANG Chunxiao1,3, WANG Shihe1,3, ZHANG Gaozhan4, MAO Jize2, CAO Shaohua1,4,*, LIU Guoqiang1,4,*
|
1 Institute of Defence Engineering AMS, PLA, Luoyang 471023, Henan, China 2 College of Aerospace and Civil Engineering, Harbin Engineering University , Harbin 150001, China 3 Henan Key Laboratory of Special Protective Materials, Luoyang 471023, Henan, China 4 School of Matreials & Chemical Engineering ,Anhui Jianzhu University, Hefei 230009, China |
|
|
Abstract The influence of nano-SiO2 content on the static mechanical properties of ultra-high performance concrete (UHPC) under the curing regime of standard curing, steam curing, dry-heat curing and steam-dry heat combined curing was studied.The test results showed that compared with standard curing regime, both steam curing regime and combined curing regime could significantly improve the compressive and flexural strength of UHPC.Dry-heat curing regime could improve the compressive strength of UHPC but reduce the flexural strength. Under standard curing regime, the compressive and flexural strength of UHPC reached the highest when the content of nano-SiO2 is 5%.Under steam curing regime, dry-heat curing regime and combined curing regime,the best nano-SiO2 content is 3%.According to the results of static test, the dynamic compressive properties of UHPC with 3% nano-SiO2 content under different curing regimes were studied with 100 mm Split Hopkinson Pressure Bar. According to the results of dynamic test,the dynamic increasing factor of UHPC was fitted with the empirical formula and the constitutive model of dynamic strain-stress curve under different strain rates was constructed.The energy consumption capacity of UHPC under different curing regim was calculated.The results showed that under the same strain rate compared with other curing regimes, the dynamic increasing factor of UHPC under standard curing regime was the largest and the energy consumption capacity of UHPC under combined curing regime was the highest.
|
Published: 25 January 2025
Online: 2025-01-21
|
|
|
|
1 Richard P,Cheyrezy M. ACI Spring Conversion, 1994. 2 Richard P,Cheyrezy M. Cement & Concretce Research, 1995, 25(7),1501. 3 Shi C,Wu Z,Xiao J,et al. Construction and Building Materials, 2015, 101,741. 4 Song M,Wang C,Cui Y,et al. Advances in Civil Engineering, DOI: 10.1155/2021/4002536. 5 Korpa A,Kowald T,Trettin R. Cement & Concrete Research, 2009, 39(2),69. 6 Huang J,Wu J,Zhao L. Bulletin of the Chinese Ceramic Society, 2019,38(8),2680 (in Chinese). 黄杰,吴瑾,赵林.硅酸盐通报,2019, 38(8),2680. 7 Krstulović R, Dabić P. Cement & Concrete Research, 2000, 30,693. 8 Zhang H,Ti T,He B,et al. Construction and Building Materials, 2019, 213,469. 9 Zhang G Z,Ge J C,Zhang C X,et al. Materials Reports.2021,35(15),15125.(in Chinese). 张高展,葛竞成,张春晓,等.材料导报,2021,35(15),15125. 10 Niu X Q.Study on mechanism of combined curing composed of precuring in hot water and heating in dry air for optimizing mechanical properties and thermally explosive spalling resistance of ultra-high performance concrete. Ph.D. Thesis, Beijing Jiaotong University, China, 2019 (in Chinese). 牛旭婧. 热水—干热组合养护优化超高性能混凝土力学及抗高温爆裂性能的机理研究. 博士学位论文.北京交通大学.2019. 11 Schmidt M,Amrhein K,Braun T,et al. Cement and Concrete Composites, 2013,36,3. 12 Huang C L. Potential effect of surface modified nano-SiO2 on the cement paste hydration in early. Ph.D. Thesis, China University of Mining and Technology -Beijing, China, 2018(in Chinese). 黄春龙.表面改性二氧化硅纳米颗粒对水泥早期水化影响的研究.博士学位论文,中国矿业大学(北京),2018. 13 Li J,Sun X D,He W F. Concrete.2022(2),90(in Chinese). 李婕,孙煦东,何文福.混凝土,2022(2),90. 14 Li Q H,Zhao X,X S L. Engineering Mechanics,2017,34(2),85(in Chinese). 李庆华,赵昕,徐世烺.工程力学,2017,34(2),85. 15 Gu Y. Modifying cementitious materials with core-shell nano-SiO2. Ph.D. Thesis, Southeast University, China, 2017(in Chinese). 顾越.核壳纳米SiO2改性水泥基材料性能研究.博士学位论文.东南大学,2017. 16 Song L,Hu S S. Explosion and Shock Waves, 2005, 25(4),368 (in Chinese). 宋力,胡时胜.爆炸与冲击, 2005, 25(4),368 . 17 Li W G,Huang Z Y,Hu G Q,et al. Construction and Building Materials, 2016, 131,767. 18 Taekgeun O,Booki C,Yun S J,et al. Cement and Concrete Composites,2023,138,104957. 19 Sun J L,Zhang C X,Mao J Z,et al. Materials Reports,2024,38(18),62.(in Chinese). 孙嘉伦,张春晓,毛继泽,等.材料导报, 2024,38(18),62. 20 Ravichandran G,Subhash G . Journal of the American Ceramic Society, 2010, 77(1),263. 21 Dong Y L,Xie H P,Li S P. Engineering Mechanics,1996(1),44 (in Chinese). 董毓利,谢和平,李世平.工程力学,1996(1),44. 22 Nie L,Xu J,Bai E. Construction and Building Materials,2018,165,232. 23 Li Y , Zhai Y , Liang W , et al. Materials, DOI:10.3390/ma13184056. 24 Yang M H,Lu Z C,Hu R Z, et al. Journal of Wuhan University of Technology, 2007(4),95 (in Chinese). 杨明辉,赵明华,曹文贵.武汉理工大学学报,2007(4),95. 25 Li L T. Building Science, 2019, 35(11),6 (in Chinese). 李林涛. 建筑科学, 2019, 35(11),6.
|
|
|
|