耐老化马氏体时效不锈钢纳米析出相和逆变奥氏体调控研究进展

doi:10.11896/cldb.22120065

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (12897KB)
Export: BibTeX | EndNote (RIS)

Abstract Maraging stainless steels achieve ultra-high strength, high toughness and excellent corrosion resistance by precipitating of ultra-fine nanoscale strengthen phases formed by short time intermediate aging, which can be used in nuclear energy, aerospace and other high-tech fields. However, when it works for a long time at medium and low temperature, its ductility and impact properties will be reduced sharply due to the coarsening of precipitation strengthening phases such as Cu rich phase and NiAl, as well as the formation of brittle Cr rich phase due to the amplitude modulation decomposition of Fe-Cr matrix. This obvious thermal aging and embrittlement problems leads to a hidden danger for service safety. It is important to reduce the coarsening of precipitated phases and the forming of brittle phases through optimal composition design and heat treatment, such as reducing the chromium and precipitated element content, increasing the nickel content. Furthermore, it is reported that reversed austenite can improves the plastic toughness of maraging stainless steels, which is expected to improve the thermal aging embrittlement problem. The amount of reversed austenite also can be controlled by composition design and post heat treatment. In this paper, the composition design principle and typical precipitated phase of martensite aging stainless steel are introduced. The control methods of nano precipitated strengthening phase with high thermal stability and the formation of reversed austenite in martensite aging stainless steel which are benefit for improving thermal aging resistance are focused on. It is expected that this review paper can provide a reference for the composition design and preparation of new types of aging resistant martensite aging stainless steel.

Key words： maraging stainless steel nano-precipitation phase reversed austenite thermal aging

Published: 25 February 2024 Online: 2024-03-01

CLC number:

TG142.71

Fund:National Natural Science Foundation of China(52001330).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LYU Runtao
	ZHOU Zhangjian
	BAI Bing
	YANG Wen

Cite this article:

LYU Runtao,ZHOU Zhangjian,BAI Bing, et al. Research Progress on the Control of Nano-precipitated and Reversed Austenite in Thermal Aging Resistant Maraging Stainless Steel[J]. Materials Reports, 2024, 38(4): 22120065-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.22120065 OR https://www.mater-rep.com/EN/Y2024/V38/I4/22120065

1 Jiao Z B, Luan J H, Miller M K, et al. Materials Today, 2017, 20(3), 142.
2 Lo K H, Shek C H, Lai J K L. Materials Science and Engineering R: Reports, 2009, 65(4-6), 39.
3 Xiong Z P, Timokhina I, Pereloma E. Progress in Materials Science, 2021, 118, 100764.
4 Yeli G, Auger M A, Wilford K, et al. Acta Materialia, 2017, 125, 38.
5 Daymond B T, Binot N, Schmidt M L, et al. Journal of Materials Engineering and Performance, 2016, 25, 1539.
6 Wang L, Dong C F, Yao J Z, et al. Corrosion Science, 2019, 154, 178.
7 Ghaffari M, Nemani A V, Nasiri A. Additive Manufacturing, 2022, 49, 102374.
8 Chen C Y, Chiu P H, Liu W S, et al. Materials Science and Enginee-ring: A, 2022, 839, 142852.
9 Kuehmann C, Tufts B, Trester P. Advanced Materials and Processes, 2008, 166(1), 37.
10 Huang C Y, Yen H W. Materials Characterization, 2021, 178, 111216.
11 Wang Z M, Li H, Shen Q, et al. Acta Materialia, 2018, 156, 158.
12 Zhou T, Faleskog J, Babu R P, et al. Materials Science and Enginee-ring: A, 2019, 745, 420.
13 Leitner H, Schober M, Schnitzer R, et al. Materials Science and Engineering: A, 2011, 528(15), 5264.
14 Li Y C, Yan W, Cotton J D, et al. Materials & Design, 2015, 82, 56.
15 Bai B, Hu R, Zhang C Y, et al. Annals of Nuclear Energy, 2021, 154, 108123.
16 Sha W, Leitner H, Guo Z, et al. Phase Transformations in Steels, 2012, 6(5), 332.
17 Yang K, Niu M, Tian J, et al. Acta Metallurgica Sinica, 2018, 54(11), 1567 (in Chinese).
杨柯, 牛梦超, 田家龙, 等. 金属学报, 2018, 54(11), 1567.
18 Yang Z, Liu Z, Liang J, et al. Transactions of Materials and Heat Treatment, 2008, 29(4), 1 (in Chinese).
杨志勇, 刘振宝, 梁剑雄等. 材料热处理学报, 2008, 29(4), 1.
19 Carter C S, Farwick D G, Ross A M, et al. Corrosion, 1971, 27, 190.
20 Bridge J E, Maniar G N. Metallography as a quality control tool, Springer, 1980, pp. 279.
21 Chen C Y, Chiu P H, Yang Y L, et al. Materials Today Communications, 2022, 31, 103454.
22 Kern C, Kooy R. Fastener Technology International, 2010, 33(1), 68.
23 Part C J, Kwon H S. Corrosion Science, 2002, 44(12), 2817.
24 Du Y B, Hu X F, Zhang S Q, et al. Materials Characterization, 2022, 190, 112014.
25 Shen Q, Xiong X Y, Li T, et al. Materials Science and Engineering: A, 2018, 723, 279.
26 Xu S S, Zhao Y, Chen D, et al. International Journal of Plasticity, 2019, 113, 99.
27 Zhang Z W, Liu C T, Miller M K, et al. Scientific Reports, 2013, 3, 1327.
28 Jiao Z B, Luan J H, Miller M K, et al. Acta Materialia, 2015, 84, 283.
29 Jiang S H, Wang H, Wu Y, et al. Nature, 2017, 544, 460.
30 Niu M C, Zhou G, Wang W, et al. Acta Materialia, 2019, 179, 296.
31 Schwich H, Görzen D, Blinn B, et al. Materials Science and Enginee-ring: A, 2020, 772, 138807.
32 Hsiao C N, Chiou C S, Yang J R. Materials Chemistry and Physics, 2002, 74(2), 134.
33 Habibi-Bajguirani H R. Materials Science and Engineering: A, 2002, 338(1-2), 142.
34 Habibi H R. Materials Letters, 2005, 59(14-15), 1824.
35 Mirzadeh H, Najafizadeh A. Materials Chemistry and Physics, 2009, 116(1), 119.
36 Matlack K H, Bradley H A, Thiele S, et al. NDT & E International, 2015, 71, 8.
37 Yan Q, Yan L C, Pang X L, et al. Corrosion Science, 2022, 205, 110416.
38 Zhou T, Babu R P, Odqvist J, et al. Materials & Design, 2018, 143, 141.
39 Jiang M K, Han Y, Sun J P, et al. Materials & Design, 2022, 221, 110977.
40 Rong X Q, Guo H, Enomoto M, et al. Materials Letters, 2021, 284(2), 128938.
41 Wang H Y, Gao X Y, Chen S M, et al. Journal of Alloys and Compounds, 2020, 846, 156386.
42 Li T, Xiong X Y, Shen Q, et al. Materials Research Experss, 2019, 6, 106510.
43 Zhang C, Enomoto M. Acta Materialia, 2006, 54(16), 4183.
44 Huang D Y, Yan J C, Zou X W. Materials Characterization, 2019, 155, 109786.
45 Wen Y R, Hirata A, Zhang Z W, et al. Acta Materialia, 2013, 61(6), 2133.
46 Hofinger M, Turk C, Ognianov M, et al. Materials Characterization, 2020, 160, 110126.
47 Wang X J, Sha G, Shen Q, et al. Materials Science and Engineering: A, 2015, 627, 340.
48 Schnitzer R, Schober M, Zinner S, et al. Acta Materialia, 2010, 58(10), 3733.
49 Hättestrand M, Nilsson J O, Stiller K, et al. Acta Materialia, 2004, 52(4), 1023.
50 Stiller K, Danoix F, Hättestrand M. Materials Science and Engineering: A, 1998, 250(1), 22.
51 Stiller K, Hättestrand M, Danoix F. Acta Materialia, 1998, 46(17), 60633.
52 Andersson M, Stiller K, Hättestrand M. Surface and Interface Analysis, 2007, 39, 195.
53 Niu M C, Yang K, Luan J H, et al. Journal of Materials Science & Technology, 2022, 104, 52.
54 Höring S, Wanderka N, Banhart J. Ultramicroscopy, 2009, 109(5), 574.
55 Leitner H, Schnitzer R, Schober M, et al. Acta Materialia, 2011, 59(12), 5012.
56 Jiang S H, Xu X Q, Li W, et al. Acta Materialia, 2021, 213, 116984.
57 Guo Z, Sha W, Vaumousse D. Acta Materialia, 2003, 51(1), 101.
58 Ping D H, Ohnuma M, Hirakawa Y, et al. Materials Science and Engineering: A, 2005, 394(1-2), 285.
59 Schnitzer R, Radis R, Nöhrer M, et al. Materials Chemistry and Physics, 2010, 122(1), 138.
60 Sun L, Simm T H, Martin T L, et al. Acta Materialia, 2018, 149, 285.
61 Ifergane S, Pinkas M, Barkay Z, et al. Materials Characterization, 2017, 127, 129.
62 Yang Z, Liu Z B, Liang J X, et al. Corrosion Science, 2021, 182, 109260.
63 Zhang C, Wang C, Zhang S L. et al. Materials Science and Engineering: A, 2021, 806, 140763.
64 Niu M C, Yin L C, Yang K, et al. Acta Materialia, 2021, 209, 116788.
65 Schober M, Schnitzer R, Leitner H. Ultramicroscopy, 2009, 109(5), 553.
66 Tian J L, Wang W, Yan W, et al. Materials, 2017, 10(11), 1293.
67 Tian J L, Chen K, Li H B, et al. Materials Science and Engineering: A, 2022, 833, 142529.
68 Tawancy H M. Journal of Materials Science, 1996, 31, 3929.
69 Verdiere A, Hofer C, Bliznuk V, et al. Materials Characterization, 2017, 131, 21.
70 Lach T G, Devaraj A, Leonard K J, et al. Journal of Nuclear Materials, 2018, 510, 382.
71 Couturier L, Geuser F D, Deschamps A. Materialia, 2020, 9, 100634.
72 Stiller K, Andrén H O, Andersson M. Materials Science and Technology, 2008, 24(6), 633.
73 Thuvander M, Andersson M, Stiller K. Materials Science and Technology, 2012, 28(6), 695.
74 Lach T G, Collins D A, Byun T S. Journal of Nuclear Materials, 2021, 557, 153268.
75 Badyka R, Saillet S, Emo J, et al. Journal of Nuclear Materials, 2021, 555, 153123.
76 Li X F, Zhang J, Chen J, et al. Materials Science and Engineering: A, 2016, 651, 474.
77 Schnitzer R, Zickler G A, Lach E, et al. Materials Science and Enginee-ring: A, 2010, 527(7-8), 2065.
78 Zhang H L, Ji X, Ma D P, et al. Journal of Materials Research and Technology, 2021, 11, 98.
79 Li Y, Li W, Liu W Q, et al. Acta Materialia, 2018, 146, 126.
80 Cao H W, Luo X H, Zhan G F, et al. Metallurgical and Materials Tran-sactions A, 2017, 48, 4403.
81 Zhao X Q, Pan T, Wang Q F, et al. Journal of Iron and Steel Research International, 2011, 18(5), 47.
82 Sun C, Liu S L, Misra R D K, et al. Materials Science and Engineering: A, 2018, 711, 484.
83 Couturier L, Descoins M, Deschamps A, et al. Materials & Design, 2016, 107, 416.
84 Xiao Y J, Xiong X Y, Sun G Y, et al. Materials Characterization, 2022, 191, 112184.
85 Takahashi J, Kawakami K, Kobayashi Y. Materials Science and Enginee-ring: A, 2012, 535, 144.
86 Jain D, Isheim D, Seidman D N. Metallurgical and Materials Transactions A, 2017, 48, 3205.
87 Wen Y R, Li Y P, Hirata A, et al. Acta Materialia, 2013, 61(20), 7726.
88 Kobayashi Y, Takahashi J, Kawakami K. Scripta Materialia, 2012, 67(10), 854.
89 Kamikawa N, Abe Y, Miyamoto G, et al. Tetsu-To-Hagane, 2013, 99(5), 352.
90 Li J B, Xiong X Y, Shen Q, et al. Materials Science and Technology, 2020, 36(7), 852.
91 Tian J L, Li Y C, Wang W, et al. Acta Metallurgica Sinica, 2016, 52(12), 1517 (in Chinese).
田家龙, 李永灿, 王威, 等. 金属学报, 2016, 52(12), 1517.
92 Lifshitz I M, Slyozov V V. Journal of Physics and Chemistry of Solids, 1961, 19(1-2), 35.
93 Zhang H L, Sun M Y, Liu Y X, et al. Acta Materialia, 2021, 211, 116878.
94 Kapoor M, Isheim D, Ghosh G, et al. Acta Materialia, 2014, 73, 56.