田口方法下钢化玻璃的冲蚀性能及损伤形貌

doi:10.11896/j.issn.1005-023X.2018.08.032

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1746KB)
Export: BibTeX | EndNote (RIS)

Abstract According to the distribution characteristics of sandstorm in Inner Mongolia, using taguchi orthogonal method and erosion experiment simulation system of wind-blow sand environment to analyze the controllable factor’s stability (impact angle, impact velocity and abrasive feed rate) and the erosion performance of tempered glass. SEM and LSCM were utilized to investigated the erosion damage morphology. Result manifested that abrasive feed rate was contrary with impact angle and impact velocity,had lower S/N and more instability in the erosion experiment. Impact angle had highest rate of contribution in erosion experiment, impact velocity secondary and abrasive feed rate thirdly. In low impact angle,the micro-cutting was the main reason of mass loss and had clearly furrow on tempered glass surface in the SEM image. In high impact angle,the main reason of mass loss was crack propagation and had brittle fracture pits on tempered glass surface in the SEM image. The erosion depth and width of damage increased with the increase of impact angle, and the damage morphology become cone.

Key words： tempered glass taguchi orthogonal erosion erosion damage laser scanning confocal microscope

Published: 25 April 2018 Online: 2018-05-11

CLC number:	TQ171
	TH117.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HAO Yunhong
	YA Ruhan
	LI Hui
	ZHAO Chengguang

Cite this article:

HAO Yunhong,YA Ruhan,LI Hui, et al. Erosion Performance and Damage Morphology of Tempered Glass Using Taguchi Orthogonal Method[J]. Materials Reports, 2018, 32(8): 1380-1384.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.08.032 OR https://www.mater-rep.com/EN/Y2018/V32/I8/1380

1 Liu Baolin, Gao Deli, Yang Jingzhou, et al. Preparation and solid-liquid erosive wear property of Sialon-SiC ceramic composite[J].Metal Mine,2009(6):132(in Chinese).
刘宝林,高德利,杨景周,等.Sialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究[J].金属矿山,2009(6):132.
2 Zhao Jianhua, Zhao Zhanxi, Yang Shunzhen, et al. Research on sediment erosion resistance of CrMoV and CrNi coatings deposited by surfacing[J].Materials Review B: Research Papers,2015,29(3):125(in Chinese).
赵建华,赵占西,杨顺贞,等.CrMoV和CrNi堆焊涂层耐泥沙冲蚀磨损性能研究[J].材料导报:研究篇,2015,29(3):125.
3 Nguyen Q B, Nguyen V B, Lim C Y H, et al. Effect of impact angle and testing time on erosion of stainless steel at higher velocities[J].Wear,2014,321:87.
4 Bao Chonggao, Wang Enze, Gao Yimin, et al. Properties of alumina particle/heat-resistant steel composites under high temperature abrasive wear[J].Journal of Xi’an Jiao Tong University,1999,33(11):79(in Chinese).
鲍崇高,王恩泽,高义民,等.氧化铝颗粒-耐热钢基复合材料的高温磨损特性[J].西安交通大学学报,1999,33(11):79.
5 Zhang Wei, Jiang Mingxue, Lian Xiaoqing. Impacting erosion mecha-nism of silicon carbide ceramics[J].Bulletin of the Chinese Ceramic Society,2014,33(3):511.
张伟,蒋明学,廉晓庆.碳化硅陶瓷的冲蚀磨损机理[J].硅酸盐通报,2014,33(3):511.
6 Wlederhorn S M, Hockey B J. Effect of material parameters on the erosion resistance of brittle materials [J].Journal of Materials Science,1983,18:766.
7 Dong Gang, Bai Wanjin, Zhang Jiuyuan, et al. Reserch on erosion behaviors of several engineering material[J].Journal of Materials Science & Engineering,2004,22(6):909(in Chinese).
董刚,百万金,张九渊,等.几种工程材料的冲蚀行为研究[J].材料科学与工程学报,2004,22(6):909.
8 Wang Yufei, Yang Zhenguo. Finite element model of erosive wear on ductile and brittle materials[J].Wear,2008,265:871.
9 Liang Xiaoping, Yang Zhengfang, Jin Zhengguo, et al. Effect of load on wear properties of alumina strengthen Y-TZP ceramic[J].Tribo-logy,2006,26(1):60(in Chinese).
梁小平,杨正方,靳正国,等.载荷对Al₂O₃增强Y-TZP陶瓷磨损特性的影响[J].摩擦学学报,2006,26(1):60.
10 Gu Wei, Cai Xuepeng, Li Zhangjun, et al. Geomorphic features of distribution of sandstorm days in western and central Inner Mongolia[J].Journal of Natural Disasters,2003,12(4):131(in Chinese).
顾卫,蔡雪鹏,李彰俊,等.内蒙古西部风沙地区沙尘暴日数分布形貌特征[J].自然灾害学报,2003,12(4):131.
11 Gao Tao, Xu Yongfu, Yu Xiao. Studies on dust storms in Inner Mongolia[J].Journal of Arid Land Resources and Environment,2004(S1):220(in Chinese).
高涛,徐永福,于晓.内蒙古沙尘暴的成因、趋势及其预报[J].干旱区资源与环境,2004(S1):220.
12 Xu Liangzhong, Liang Xifeng, Liu Tanghong, et al. Experiment test of wind-sand flow destruction to train tempered glass[J].Journal of Central South University(Science and Technology),2014,45(7):2489(in Chinese).
徐良中,梁习锋,刘堂红,等.风沙流对列车车窗玻璃破坏能力的试验测试[J].中南大学学报(自然科学版),2014,45(7):2489.
13 Wang Lichuang, Zang Shuguang, Ma Juanrong, et al. Fatigue loa-ding capacities of side windows on high speed trains[J].Journal of Wuhan University of Technology,2010,32(22):5(in Chinese).
王立闯,臧曙光,马眷荣,等.高速列车侧窗风压疲劳性能研究[J].武汉理工大学学报,2010,32(22):5.
14 Wu Jianjun, Xie Zhouwei, Huang Yulin, et al. Sensitivity analysis on stress of flexible hinges to design parameters based on taguchi method[J].Journal of Mechanical Strength,2016,38(2):252(in Chinese).
伍建军,谢周伟,黄裕林,等.基于田口方法柔性铰链应力对设计参数的灵敏度分析[J].机械强度,2016,38(2):252.
15 Mehmet Bagci, Huseyin Imrek. Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials[J].Materials & Design,2013,46:706.