实现Ti(C,N)基金属陶瓷强韧化的技术路径

doi:10.11896/j.issn.1005-023X.2018.07.013

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1620KB)
Export: BibTeX | EndNote (RIS)

Abstract Ti(C,N) based cermets have been used widely in cutting tools and molds due to their excellent properties of high strength, high hardness, high temperature oxidation resistance, acid and alkali resistance, and abrasion resistance. During high temperature machining, cermet tools shows significantly high sticking resistance, thermal stability, and self-lubricating. Their red hardness, wear resistance, and oxidation resistance are better than cemented carbide ones. The usage of cermet cutting tools over that of the total cutting tools is more than 35% in Japan and more than 20% in both Europe and US, while in China, the number drops to 3%, indicating that the research, development, as well as the manufacture of cermet tools in China are far behind those in advanced countries. Therefore, it becomes extremely urgent and important to speed up the research, development, manufacture, and application of cermet cutting tools in China for the purpose of the development of the global manufacturing powerhouse for China, improving the precision and surface smoothness during high speed machining, increasing the machining efficiency of processing industry, gua-ranteeing the machining quality, and elevating the level of manufacture industry of cutting tools in China.
The fatal drawbacks of Ti(C,N) based cermet include low impact resistance, low fracture toughness, as well as insufficient high temperature strength in spite of the superior red hardness, wear resistance, and oxidation resistance compared with cemented carbide tools. Therefore, significant research has been made on the strengthening and toughening of Ti(C,N) based cermet globally with some good results. The related research is focused on: Ⅰ. the composition of the ceramic and metal phases, Ⅱ. sintering processes, and Ⅲ. the adoption of nano-enhancement. In recent two years, due to the shortage and high price of Mo and Co, some research has been done on Mo and Co free Ti(C,N) based high-entropy alloys for the sake of low cost and high performance.
In this paper, the global research on strengthening and toughening of Ti(C,N) based cermets has been classified, summarized, and generalized. It is found that, based on the current research results, the composition, microstructure and sintering process are the most important factors influencing the strength and toughness of Ti(C,N) based cermets. Three methods for strengthening and toughening of Ti(C,N) based cermets are summarized, including nano-particle toughening, whisker toughening, and fiber toughening. Finally, the urgent unresolved problems are summarized and the development direction is proposed for the strengthening and toughening of Ti(C,N) based cermets.

Key words： Ti(C N)-based cermets strengthening and toughening microstructure cermets

Published: 10 April 2018 Online: 2018-05-11

CLC number:

TG148

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIAO Shuiqing
	LIU Jie
	XIAO Baijun
	DENG Xin
	WU Shanghua

Cite this article:

XIAO Shuiqing,LIU Jie,XIAO Baijun, et al. Towards High-strength and High-toughness Ti(C,N)-based Cermets: a Technological Review[J]. Materials Reports, 2018, 32(7): 1129-1138.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.07.013 OR https://www.mater-rep.com/EN/Y2018/V32/I7/1129

1 刘宁,等.Ti(C,N)基金属陶瓷材料[M].合肥:合肥工业大学出版社,2009:9.
2 Sun W C, She X L, Zhang L, et al. Research progress of strengthening and toughening of Ti(C,N)-based cermets[J].Hot Working Technology,2014,43(18):17(in Chinese).
孙万昌,佘晓林,张磊,等.Ti(C,N)基金属陶瓷材料的的强韧化研究进展[J].热加工工艺,2014,43(18):17.
3 Xiao S Q, Wu S H. Research progress on microstructure and properties of Ti(C,N)-based cermets[J].Cemented Carbide,2014,31(2):112(in Chinese).
肖水清,伍尚华.Ti(C,N)基金属陶瓷材料显微结构与性能研究进展[J].硬质合金,2014,31(2):112.
4 Xiong W H, Hu Z H, Cui K. Interface behavior of carbide in Ti(C,N)-based cermet[J].Materials Review,1998,12(2):14(in Chinese).
熊惟皓,胡镇华,崔崑.Ti(C,N)基金属陶瓷中的碳化物的界面行为[J].材料导报,1998,12(2):14.
5 Yang J K, Lee H C. Microstructural evolution during the sintering of a Ti(C,N)-Mo₂C-Ni alloy[J].Materials Science and Engineering A,1996,209:213.
6 Wang H T, Xiong W H. Influence of molybdenum content on the structure and characteristic of rim phase of Ti(C,N)-based cermets[J].Cemented Carbide,2006,12(4):203(in Chinese).
王洪涛,熊惟皓.Mo对Ti(C,N)基金属陶瓷包覆相结构与性能的影响[J].硬质合金,2006,12(4):203.
7 He L, Huang C Z, Huang Q, et al. Effect of the content of Mo₂C on the mechanical properties and microstructure of Ti(C,N)-based cermet[J].Journal of Materials Science & Engineering,2003,21(2):238(in Chinese).
何林,黄传真,黄勤,等.Mo₂C含量对Ti(C,N)基陶瓷力学性能和显微结构的影响[J].材料科学与工程学报,2003,21(2):238.
8 Zhang X B, Liu N. The influence of Mo content on the microstructure and properties of Ti(C,N)-based cermets[J].Cemented Carbide,2006,23(3):160(in Chinese).
章晓波,刘宁.Mo含量对Ti(C,N)基金属陶瓷组织和性能的影响[J].硬质合金,2006,23(3):160.
9 Yang Q Q, Xiong W H, Zhang M, et al. Microstructure and mecha-nical properties of Mo-free Ti(C,N)-based cermets with Ni-xCr binders[J].Journal of Alloys and Compounds,2015,636:270.
10Yan Y L, Zheng Y, Cheng X, et al. Effect of Molybdenum on microstructure and properties of Ti(C,N)-based cermets[J].Powder Metallurgy Industry,2008,18(1):28(in Chinese).
严永林,郑勇,承新,等.Mo含量对Ti(C,N)基金属陶瓷组织和性能的影响[J].粉末冶金工业,2008,18(1):28.
11Wang S Y. The effect of Mo on the microstructure and mechanical properties of Ti(C,N)-based cermets[J].Journal of Huangshi Institute of Technology,2009,25(2):1(in Chinese).
王赛玉.Mo对Ti(C,N)基金属陶瓷组织性能的影响[J].黄石理工学院学报,2009,25(2):1.
12Wu Y M, Yi L J, Wang X L, et al. Effect of WC content on the microstructure of Ti(C,N)-based Cermets[J].Iron Steel Vanadium Titanium,2016,37(6):56(in Chinese).
吴悦梅,易磊隽,王新玲,等.WC含量对Ti(C,N)基金属陶瓷组织的影响[J].钢铁钒钛,2016,37(6):56.
13 Wu Y M, Yi B, Wang X L, et al. Effect of WC powder size on the microstructure and properties of Ti(C,N)-based Cermets[J].Iron Steel Vanadium Titanium,2017,38(3):57(in Chinese).
吴悦梅,李斌,王新玲,等.WC粉末粒度对Ti(C,N)基金属陶瓷组织和性能的影响[J].钢铁钒钛,2017,38(3):57.
14 Li J G, Liu N. Effect of WC content on the microstructure and pro-perties of Ti(C,N)-based cermets[J].Advanced Ceramics,2006,27(4):3(in Chinese).
李吉刚,刘宁.WC含量对Ti(C,N)基金属陶瓷组织和性能的影响研究[J].现代技术陶瓷,2006,27(4):3.
15 Jin Z B, Liu N, Zhan B, et al. Influence of WC content on microstructure and mechanical properties of ultrafine Ti(C,N)-based cermets[J].Cemented Carbide, 2010,27(5):269(in Chinese).
金之铂,刘宁,詹斌,等.WC含量对超细Ti(C,N)基金属陶瓷组织和性能的影响[J].硬质合金,2010,27(5):269.
16 Xiong Ji, Guo Zhixing, et al. The effect of WC, Mo2C, TaC content on the microstructure and properties of ultra-fine TiC_0.7N_0.3 cermet[J].Materials and Design,2007,28:1689.
17 Dong Guangbiao, Xiong Ji, Chen Jianzhong, et al. Effect of WC on the microstructure and mechanical properties of nano Ti(C,N)-based cermets[J].International Journal of Refractory Metals and Hard Materials,2012,35:159.
18 Qu J, Xiong W H, Yan Z H, et al. Effects of WC particle sizes on microstructure and mechanical properties of Ti(C,N)-based cermets[J].Cemented Carbide,2010,27(6):321(in Chinese).
瞿峻,熊惟皓,姚振华,等.WC粒径对Ti(C,N)基金属陶瓷组织和性能的影响[J].硬质合金,2010,27(6):321.
19 Wu Y M, Zhou L M, Xiong J, et al. Effect of WC and Mo₂C addition on microhardness of Ti(C,N)-based cermets at high temperature[J].Materials for Mechanical Engineering,2017,41(7):24(in Chinese).
吴悦梅,周黎明,熊计,等.WC和Mo₂C的添加对Ti(C,N)基金属陶瓷高温显微硬度的影响[J].机械工程材料,2017,41(7):24.
20He L, Huang C Z, Sun J, et al. Effect of the content of Cr₃C₂ on the mechanical properties of Ti(C,N)-based cermets[J].Journal of Materials Engineering,2003(7):7(in Chinese).
何林,黄传真,孙静,等.Cr₃C₂含量对Ti(C,N)基金属陶瓷力学性能的影响[J].材料工程,2003(7):7.
21Zhao Y L, Zhao N W, Liu L Y, et al. Effect of the content of Cr₃C₂ on Ti(C,N)-based cermets[J].Cemented Carbide,2008,25(1):1(in Chinese).
赵永乐,赵能伟,刘林艳,等.Cr₃C₂对Ti(C,N)基金属陶瓷性能的影响[J].硬质合金,2008,25(1):1.
22Ulf Rolander, Gerold Weinl, Marcus Zwinkels, et al. Effect of Ta on structure and mechanical properties of (Ti,Ta,W)(C,N) Co cermets[J].International Journal of Refractory Metals & Materials,2001,19:325.
23 Chen X, Xiong W H, Qu J, et al. Microstructure and mechanical properties of (Ti,W,Ta)C-xMo-Ni cermets[J].International Journal of Refractory Metals and Hard Materials,2012,31:56.
24 Naidoo M, Johnson O, Sigalas I, et al. Influence of tantalum on the microstructure and properties of Ti(C,N)-Ni cermets[J].International Journal of Refractory Metals and Hard Materials,2014,42:97.
25 Rafiaei S M, Kim J H, Kang S. Effect of nitrogen and secondary carbide on the microstructure and properties of (Ti0.93W0.07)C-Ni cermets[J].International Journal of Refractory Metals and Hard Materials,2014,44:123.
26 Dai H X, Xiong W H, Zhang G P, et al. Effect of TaC contents on thermal shock resistance of Ti(C,N)-based cermets[J].Materials for Mechanical Engineering,2012,36(12):10(in Chinese).
戴鸿霞,熊惟皓,张国鹏,等.TaC含量对Ti(C,N)基金属陶瓷抗热震性能的影响[J].机械工程材料,2012,36(12):10.
27 Chen M, Xiao X, Zhang X F. Effect of TaC content on microstructure and properties of TiCN-based cermets[J].Materials Science and Engineering of Powder Metallurgy,2016,21(2):270(in Chinese).
陈敏,肖玄,张雪峰.TaC含量对Ti(C,N)基金属陶瓷组织与性能的影响[J].粉末冶金材料科学与工程,2016,21(2):270.
28 Xiong J, Guo Z, Shen B, et al. The effect of WC, Mo₂C, TaC content on the microstructure and properties of ultra-fine Ti C_0.7N_0.3 cermets[J].Materials & Design,2007,28:1689.
29 Xu L Q, Huang C Z, Wang S L, et al. Effect of content of VC on mechanical properties of Ti(C,N)-based cermets[J].Materials for Mechanical Engineering, 2007,31(11):44(in Chinese).
徐立强,黄传真,王随莲,等.VC含量对Ti(C,N)基金属陶瓷力学性能的影响[J].机械工程材料,2007,31(11):44.
30Zhan B, Liu N. Effect of VC microstructure and properties of Ti(C,N)-based cermet modified by nano-TiN addition[J].Cemented Carbide, 2010,27(4):214(in Chinese).
詹斌,刘宁.VC对纳米TiN改性Ti(C,N)基金属陶瓷组织和性能的影响[J].硬质合金,2010,27(4):214.
31Li G X, Hu W W, Liu N, et al. Effect of VC on microstructure and property of nano Ti(C,N)-based cermet[J].Heat Treatment,2011,26(3):48(in Chinese).
李冠晓,胡巍巍,刘宁,等.VC对纳米Ti(C,N)基金属陶瓷组织和性能的影响[J].热处理,2011,26(3):48.
32Zhan B, Liu N, Jin Z B, et al. Effect of VC/Cr₃C₂ on the microstructure and mechanical properties of Ti (C,N)-based cermets[J].Transactions of Nonferrous Metals Society China,2012(28):1096.
33 Qi F, Kang S.A study On microstructural changes in Ti(C,N)-NbC-Ni cermets[J].Materials Science and Engineering A,1998,251:276.
34 Sun Yong, Alan, Seong-Won Kim, et al. Microstructural of Ti(C,N)-WC-NbC-Ni cermets[J].American Society,2001,84(4):843.
35 Wang J, Liu Y, Feng Y,et al.Effect of NbC On the microstructure and sinterability of Ti(C_0.7,N_0.3)-based cetrmets[J].Int Journal of Refractory Metals & Hard Materials,2009,27:549.
36 Tan J H, Zhou S Z, Zhu L, et al. Effect of the content of NbC on the microstructure and mechanical properties of Ti(C,N)-based cermets[J].Cemented Carbide,2010,27,2:78(in Chinese).
谭锦颢,周书助,朱磊,等.NbC含量对Ti(C,N)基金属陶瓷组织和力学性能的影响[J].硬质合金,2010,27(2):78.
37 Liu N, Huang X M, et al. Effect of rare earth metal Er on the microstructure and mechanical properties of Ti(C,N)-based cermets[J].Journal of the Chinese Ceramic Society,2000,28(1):72(in Chinese).
刘宁,黄新民,等.Er对Ti(C,N)基金属陶瓷结构和力学性能的影响[J].硅酸盐学报,2000,28(1):72.
38 Li P, Hu Y B, Xiong W H, et al. Effect of Re element Y on properties of Ti(C,N)-based cermet[J].Cemented Carbide,2000,7(2):65(in Chinese).
李鹏,胡耀波,熊惟皓,等.稀土元素Y对Ti(C,N)基金属陶瓷性能的影响[J].硬质合金,2000,7(2):65.
39 Sun W C, Zhang P, Li P, et al. Phase evolution,microstructure and properties of Y₂O₃-doped TiCN-based cermets[J].Journal of Rare Earths,2015,33(8):867.
40Yu L X, Xiong W H, Feng P, et al. Effects of binder’s composition on microstructure and properties of Ti(C,N)-based cermets[J].Materials Science and Engineering of Powder Metallurgy,2005,10(5):290(in Chinese).
余立新,熊惟皓,丰平,等.粘结相成分对Ti(C,N)基金属陶组织及性能的影响[J].粉末冶金材料科学与工程,2005,10(5):290.
41Zhang H Q, Liu N, Song R Y, et al. Effect of Ni-Co on the properties of ultra-fine grade Ti(C,N)-based cermets[J].Cemented Carbide, 2008,25(4):214(in Chinese).
张红芹,刘宁,宋瑞颖,等.镍钴对超细Ti(C,N)基金属陶瓷性能的影响[J].硬质合金,2008,25(4):214.
42Zhang L W. Study on Al₂O₃/Ti(C,N) compound sinter materials[J].China Ceramics,2014,50(12):82(in Chinese).
张力伟.Al₂O₃/Ti(C,N)复相陶瓷刀具材料的研究[J].中国陶瓷,2014,50(12):82.
43 Zhu G, Xie M, Liu Y, et al. Effect of Fe content on the microstructure and mechanical properties of Ti(C,N)-based Cermets[J].Rare Metals and Cemented Carbides,2016,44(2):30(in Chinese).
朱刚,谢明,刘颖,等.Fe添加量对Ti(C,N)基金属陶瓷显微组织及力学性能的影响[J].稀有金属与硬质合金,2016,44(2):30.
44 Zhang Q, Liu B, Chen H. Review of the effect factors on the properties of Ti(C,N)-based cermet cutting tool material [J].Journal of Chongqing University of Arts and Sciences,2014,33(5):5(in Chinese).
张茜,刘兵,陈慧. Ti(C,N)基金属陶瓷刀具材料的性能影响因素[J].重庆文理学院学报,2014,33(5):5.
45 Wonbaek Kim, Chang-Yul Suh, Ki-Min Roh,et al.High-frequency induction heated sintering of high-energy ball milled TiC_0.5N_0.5 powders and mechanical properties of the sintered products[J].Cermanics International,2013,39:585.
46 Frederic Monteverde, Valentina Medri, Alida Bellosi,et al.Microstructure of hot-pressed Ti(C,N)-based cermets[J].Journal of the European Cermanics Society,2002,22:2587.
47 Li P P, Ye J W, Liu Y, et al. The influence of low pressure sintering temperature on microstructure and properties of Ti(C,N)-based cermets[J].Journal of Functional Materials,2010,41(10):1724(in Chinese).
李平平,叶金文,刘颖,等.低压烧结温度对Ti(C,N)基金属陶瓷显微结构和力学性能的影响[J].功能材料,2010,41(10):1724.
48 Liu W L, Li S F, Li Y B,et al. Study on core-rim microstructure and properties of Ti(C,N)-based cermet[J].Rare Metal Materials and Engineering, 2011,40(s1):578.
刘维良,李少峰,李友宝,等.Ti(C,N)基金属陶瓷的芯-壳显微结构与性能研究[J].稀有金属材料与工程,2011,40(s1):578.
49 Liang Z G, Xiong W H, Lei Y, et al. Fabrication of nano-composite Ti(C,N)-basedcermets by spark plasma sintering[J].Materials for Mechanical Engineering,2006,30(3):64(in Chinese).
梁在国,熊惟皓,雷燕,等.放电等离子烧结纳米复合Ti(C,N)基金属陶瓷[J].机械工程材料,2006,30(3):64.
50Zhang S, Tang S W, Li P N, et al. Microstructure and properties of Ti(C,N)-Co cermet fabricated by spark plasma sintering[J].Journal of Materials Science & Engineering, 2015,33(4):587(in Chinese).
张帅,唐思文,李鹏南,等.放电等离子烧结制备Ti(C,N)-Co金属陶瓷的组织和性能[J].材料科学与工程学报,2015,33(4):587.
51Ostap Zgalat-Lozynskyy, Mathias Herrmann, Andrey Raguly,et al.Spark plasma sintering of TiCN nanopowders in non-linear heating and loading regimes[J].Journal of the European Cermanics Society,2011,31:809.
52Zhang C J, Peng X. Preparation TiCN matrix cermets with microwave sintering[J].Science and Technology of West China,2015,14(11):88(in Chinese).
张翠娟,彭新.微波烧结制备Ti(C,N)基金属陶瓷[J].中国西部科技,2015,14(11):88.
53 Xu Z M, Yi X J, Zhen J S, et al. A study of microstructure and performance of TiC nanopowder reinforced Ti(C,N)-based cermets[J].Journal of Functional Materials,2003,34(6):696(in Chinese).
徐智谋,易新建,郑家燊,等.纳米TiC增强Ti(C,N)基金属陶瓷材料的组织与性能研究[J].功能材料,2003,34(6):696.
54 Xu Z M, Yi X J, Hu M Z, et al. Preparation of nano-Ti(C,N) reinforced Ti(C,N)-based cermets[J].Journal of Inorganic Materials,2003,24(3):41(in Chinese).
徐智谋,易新建,胡茂中,等.纳米Ti(C,N)增强Ti(C,N)基金属陶瓷的制备研究[J].无机材料学报,2003,24(3):41.
55 Li Y. Effect of carbon nanotubes on the microstructure and mechanical properties of Ti(C,N)-based cermets[D].Hefei: Hefei University of Technology,2007(in Chinese).
李勇.添加碳纳米管对Ti(C,N)基金属陶瓷显微组织和力学性能的影响[D].合肥:合肥工业大学,2007.
56 Lu X P, Zheng Y, Wu P. Effect of CNTs addition on microstructure and mechanical properties of Ti(C,N)-based cermets[J].The Chinese Journal of Nonferrous Metals,2011,21(1):145(in Chinese).
吕学鹏,郑勇,吴鹏.碳纳米管添加量对Ti(C,N)基金属陶瓷组织和力学性能的影响[J].中国有色金属学报,2011,21(1):145.
57 Zhao Y L. Research on themanufacturing technique of Ti(C,N)-based cermets with high strength[D].Nanjing: Nanjing University of Aeronautics and Astronautics, 2010(in Chinese).
赵永乐.高强韧性 Ti(C,N)基金属陶瓷制备技术的研究[D].南京:南京航空航天大学,2010.
58 Qu J, Xiong W H, Ke Y L, et al. Microstructure and mechanical properties of nano-SiC whisker reinforced Ti(C,N)-based cermets[J]. Materials for Mechanical Engineering, 2009,33(12):62(in Chinese).
瞿峻,熊惟皓,柯阳林,等.纳米SiC晶须增强Ti(C,N)基金属陶瓷的显微组织与力学性能[J].机械工程材料,2009,33(12):62.
59 Zhang P, Sun W C, Li P, et al. Influence of modified carbon fibers content on microstructure and mechanical properties of Ti(C,N)-based Cermets[J].Hot Working Technology,2015,44(10):149(in Chinese).
张佩,孙万昌,李攀,等.改性碳纤维含量对Ti(C,N)基金属陶瓷组织结构和力学性能的影响[J].热加工工艺,2015,44(10):149.45 Zhang Q, Liu B, Chen H. Review of the effect factors on the properties of Ti(C,N)- based cermet cutting tool material[J].Journal of Chongqing University of Arts and Sciences,2014,33(5):5(in Chinese).
张茜,刘兵,陈慧.Ti(C,N)基金属陶瓷刀具材料的性能影响因素[J].重庆文理学院学报,2014,33(5):5.
46 刘维良,李少峰,李友宝等.Ti(C,N)基金属陶瓷的芯-壳显微结构与性能研究[J].稀有金属材料与工程.2011,40(增刊1):578.
47 Li P P, Ye J W, Liu Y, et al. The influence of low pressure sintering temperature on microstructure and properties of Ti(C,N)-based cermets[J].Journal of Functional Materials,2010,41(10):1724(in Chinese).
李平平,叶金文,刘颖,等.低压烧结温度对Ti(C,N)基金属陶瓷显微结构和力学性能的影响[J].功能材料,2010,41(10):1724.
48 Liang Z G, Xiong W H, Lei Y, et al. Fabrication of nano-composite Ti(C,N)-based cermets by spark plasma sintering[J].Materials for Mechanical Engineering,2006,30(3):64(in Chinese).
梁在国,熊惟皓,雷燕,等.放电等离子烧结纳米复合Ti(C,N)基金属陶瓷[J].机械工程材料,2006,30(3):64.
49 Zhang S, Tang S W, Li P N, et al. Microstructure and properties of Ti(C,N)-Co cermet fabricated by spark plasma sintering[J].Journal of Materials Science & Engineering,2015,33(4):587(in Chinese).
张帅,唐思文,李鹏南,等.放电等离子烧结制备Ti(C,N)-Co金属陶瓷的组织和性能[J].材料科学与工程学报,2015,33(4):587.
50Zhang C J, Peng X. Preparation TiCN Matrix cermets with microwave sintering[J].Science and Technology of West China,2015,14(11):88(in Chinese).
张翠娟,彭新.微波烧结制备Ti(C,N)基金属陶瓷[J].中国西部科技,2015,14(11):88.
51Wonbaek Kim, Chang-Yul Suh, Ki-Min Roh,et al.High-frequency induction heated sintering of High-energy ball milled TiC_0.5N_0.5 powders and mechanical properties of the sintered products[J].Cermanics International,2013,39:585.
52Frederic Monteverde, Valentina Medri, Alida Bellosi,et al.Microstructure of hot-pressed Ti(C,N)-based cermets[J].Journal of the European Cermanics Society,2002,22:2587.
53 Ostap Zgalat-Lozynskyy, Mathias Herrmann, Andrey Raguly,et al.Spark plasma sintering of TiCN nanopowders in non-linear heating and loading regimes[J].Journal of the European Cermanics Society,2011,31:809
54 Xu Z M, Yi X J, Zhen J S, et al. A study of microstructure and performance of TiC nanopowder reinforced Ti(C,N)-based cermets[J].Journal of Functional Materials,2003,34(6):696(in Chinese).
徐智谋,易新建,熊惟皓,等.纳米TiC增强Ti(C,N)基金属陶瓷材料的组织与性能研究[J].功能材料,2003,34(6):696.
55 Xu Z M, Yi X J, Hu M Z, et al. Preparation of nano-Ti(C,N) reinforced Ti(C,N)-based cermets[J].Journal of Inorganic Materials,2003,24(3):41(in Chinese).
徐智谋,易新建,胡茂中,等.纳米Ti(C,N)增强Ti(C,N)基金属陶瓷的制备研究[J].无机材料学报,2003,24(3):41.
56 Li Y. Effect of carbon nanotubes on the microstructure and mechanical properties of Ti(C,N)-based cermets[D].Hefei:Hefei University of Technology,2007(in Chinese).
李勇.添加碳纳米管对Ti(C,N)基金属陶瓷显微组织和力学性能的影响[D].安徽:合肥工业大学.2007.
57 Lu X P, Zheng Y, Wu P. Effect of CNTs addition on microstructure and mechanical properties of Ti(C,N)-based cermets[J].The Chinese Journal of Nonferrous Metals,2011,21(1):145(in Chinese).
吕学鹏,郑勇,吴鹏.碳纳米管添加量对Ti(C,N)基金属陶瓷组织和力学性能的影响[J].中国有色金属学报,2011,21(1):145.
58 Zhao Y L. Research on the manufacturing technique of Ti(C,N)-based cermets with high strength[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010(in Chinese).
赵永乐.高强韧性Ti(C,N)基金属陶瓷制备技术的研究[D].南京:南京航空航天大学,2010.
59 Qu J, Xiong W H, Ke Y L, et al. Microstructure and mechanical properties of nano-SiC whisker reinforced Ti(C,N)-based cermets[J].Materials for Mechanical Engineering,2009,33(12):62(in Chinese).
瞿峻,熊惟皓,柯阳林,等.纳米SiC晶须增强Ti(C,N)基金属陶瓷的显微组织与力学性能[J].机械工程材料,2009,33(12):62.
60Zhang P, Sun W C, Li P, et al. Influence of modified carbon fibers content on microstructure and mechanical properties of Ti(C,N)-based Cermets[J].Hot Working Technology,2015,44(10):149(in Chinese).
张佩,孙万昌,李攀,等.改性碳纤维含量对Ti(C,N)基金属陶瓷组织结构和力学性能的影响[J].热加工工艺,2015,44(10):149.