| RESEARCH PAPER |
|
|
|
|
|
| Effect of Mn and Zr on the Anisotropy of Al-Zn-Mg-Cu Aluminum Alloy |
| JIAO Huibin1, 2, CHEN Shanda2, 3, CHEN Songyi1, 2, CHEN Kanghua1, 2, 3
|
1 Light Alloy Research Institute, Central South University, Changsha 410083;
2 Collaborative Innovation Center of Advanced Nonferrous Structural Materials and Manufacturing, Central South University, Changsha 410083;
3 Science and Technology on High Strength Structural Materials Laboratory, Central South University, Changsha 410083 |
|
|
|
|
Abstract The effect of Mn and Zr on the anisotropy of Al-Zn-Mg-Cu alloys was investigated by means of mechanical tensile, exfoliation corrosion and intergranular corrosion testing combined with optical microscopy(OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results showed that the tiny and diffuse Al6Mn, Al3Zr precipitations appeared in the alloys after the addition of Mn and Zr, which could inhibited the recrystallization of Al-Zn-Mg-Cu-Ti alloys and contri-buted to the increase of grain aspect ratio in the alloy. Therefore, the mechanical properties and the abilities of resistance to intergra-nular corrosion, exfoliation corrosion were improved, but the anisotropy of alloys was increased. Moreover, the results revealed that the effect of Zr on anisotropy of microstructure and properties in the alloy was significantly larger than that of Mn.
|
|
Published: 25 March 2018
Online: 2018-03-25
|
|
|
|
|
1 Ni Peixiang, Zuo Xiurong, Wu Xinfeng. Present research status of Al-Zn-Mg alloy series[J].Light Alloy Fabrication Technology,2007,35(1):7(in Chinese).
倪培相,左秀荣,吴欣凤.Al-Zn-Mg系合金研究现状[J].轻合金加工技术,2007,35(1):7.
2 Song R G, Dietzel W, Zhang B J, et al. Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy[J].Acta Materialia,2004,52(16):4727.
3 Dumont D, Deschamps A, Brechet Y. On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy[J].Materials Science and Engineering:A,2003,356(1-2):326.
4 Karabin M E, Barlat F, Schultz R W. Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve[J].Journal of Materials Processing Technology,2007,189(1-3):45.
5 Hou Taixue, Wu Yunxue, Xiong Shanjiang. The effect of heat treatment on the fracture toughness of aluminum alloy LC9 forgings[J].Heat Treatment of Metals,1991,2(8):38(in Chinese).
侯太学,吴运学,熊山江.热处理对LC9合金锻件断裂韧性的影响[J].金属热处理,1991,2(8):38.
6 Zhang Xinming, Han Nianmei, Liu Shengdan, et al. Inhomogeneity of texture, tensile property and fracture toughness of 7050 aluminum alloy thick plate[J].The Chinese Journal of Nonferrous Metals,2010,2(20):202(in Chinese).
张新明,韩念梅,刘胜胆,等.7050铝合金厚板织构、拉伸性能及断裂韧性的不均匀性[J].中国有色金属学报,2010,2(20):202.
7 Robinson J S, Cudd R L, Tanner D A, et al. Quench sensitivity and tensile property inhomogeneity in 7010 forgings[J].Journal of Materials Processing Technology,2001,119(1-3):261.
8 Cai Gangyi, Lv Guangshu, Ma Zhuang. Heat treatment process aimed at elimination of anisotropy of 7A05 aluminum alloy sheet[J].Transactions of Beijing Institute of Technology,2007,10(27):298(in Chinese).
蔡刚毅,吕广庶,马壮.消除7A05铝合金板材各向异性的热处理工艺[J].北京理工大学学报,2007,10(27):298.
9 Zhang Wenjing, Ren Weicai, Deng Zhenzhen, et al. Effect of zirconium on the microstructure and mechanical properties of super-high strength aluminum alloys[J].Nonferrous Metals Processing,2013,42(4):8(in Chinese).
张文静,任伟才,邓桢桢,等.Zr元素对超高强铝合金微观组织及力学性能的影响[J].有色金属加工,2013,42(4):8.
10 Tsivoulas D, Robson J D, Sigli C, et al. Interactions between zirconium and manganese dispersoid-forming elements on their combined addition in Al-Cu-Li alloys[J].Acta Materialia,2012,60(13-14):5245.
11 Li J, Gao X, Jie Z, et al. Texture and magnetostriction in rolled Fe-Ga alloy[J].Acta Metallurgica Sinica,2008,44(9):1031.
12 Tanaka H, Esaki H, Yamada K, et al. Improvement of mechanical properties of 7475 based aluminum alloy sheets by controlled warm rolling[J].Sumitomo Light Metal Technical Reports,2004,45(1):69.
13 Fang H C, Chao H, Chen K H. Effect of recrystallization on intergranular fracture and corrosion of Al-Zn-Mg-Cu-Zr alloy[J].Journal of Alloys and Compounds,2015,622(15):166.
14 Minoda T, Yoshida H. Effect of grain boundary characteristics on intergranular corrosion resistance of 6061 aluminum alloy extrusion[J].Metallurgical and Materials Transactions A,2002,33(9):2891.
15 Day M K B, Cornish A J, Dent T P. The relationship between structure and stress-corrosion life in an Al-Zn-Mg alloy[J].Materials Science Journal,1969,3(1):175.
16 He Y D, Zhang X M, You J H. Effect of minor Sc and Zr on microstructure and mechanical properties of Al-Zn-Mg-Cu[J].Transactions of Nonferrous Metals Society of China,2006,16(5):1228.
17 Kannan M B, Raja V S. Enhancing stress corrosion cracking resis-tance in Al-Zn-Mg-Cu-Zr alloy through inhibiting recrystallization[J].Engineering Fracture Mechanics,2010,77(2):249.
18 Robson J D, Prangnell P B. Predicting recrystallised volume fraction in aluminium alloy 7050 hot rolled plate[J].Materials Science and Technology,2002,18(6):607. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2018, Vol. 32 
