| COMPUTATIONAL SIMULATION |
|
|
|
|
|
| Study on Hot Deformation Behavior and Hot Processing Map of H13 Steel Containing Rare Rarth |
| ZHAO Zhengyang1,2, SUN Mingyue2, SUN Jianliang1
|
1 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004;
2 Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 |
|
|
|
|
Abstract H13 steel containing rare earth was compressed at the temperature of 900-1 200 ℃ and the strain rate of 0.01-10 s-1 by the Gleeble-3800 thermal-mechanical simulator. The constitutive equation and hot processing map of the rare earth H13 steel at high temperature were established according to the obtained flow stress. Meanwhile, the microstructure of the compressed specimens were analyzed by optical microscope. The flow stress showed that the rare earth H13 steel had a discontinuous dynamic recrystallization behavior at the large strain rate and the stress of the rare earth H13 was elevated obviously. The thermal activation energy of the rare earth H13 steel was 573 kJ/mol. The suitable processing parameter of the rare earth H13 steel was within 1 050-1 200 ℃ and the strain rate was within the range of 0.01-0.1 s-1. Therefore, the addition of rare earth has broadened the scope of the hot processing parameters.
|
|
Published: 25 April 2017
Online: 2018-05-02
|
|
|
|
|
1 Liu J Y, Jiang B P, Liu J H. Development and applications of mould steel for hot fabrication[J]. Constr Machinery Equipment,2006,37(6):48(in Chinese).
刘俊英, 蒋伯平, 刘金海. 热作模具钢的发展与应用[J]. 工程机械,2006,37(6):48.
2 Li Y, Zuo X R, Chen Y B, et al. Progress of research in hot wor-king die steel at home and abroad[J]. Special Steel,2010,31(3):20(in Chinese).
李勇, 左秀荣, 陈蕴博, 等. 国内外热作模具钢的研究进展[J].特殊钢,2010,31(3):20.
3 Wu X C, Zuo P P. Development status and trend of hot working die steels at home and aborad[J]. Die Mould Ind,2013,39(10):1(in Chinese).
吴晓春, 左鹏鹏. 国内外热作模具钢发展现状与趋势[J].模具工业,2013,39(10):1.
4 Wang L M, Xu B, Zhu J X, et al. RE function and application prospect in austenitic stainless steel[J]. Chinese Rare Earths,2005,26(5):42(in Chinese).
王龙妹, 徐飙, 朱京希,等. 奥氏体不锈钢中稀土的作用研究及应用前景[J]. 稀土,2005,26(5):42.
5 Pan F, Zhang J, Chen H L, et al. Effects of rare earth metals on steel microstructures[J]. Materials,2016,9(6):417.
6 Zhang Q, Li C R, Yang Y M. Effect of Ce on mechanical properties of H13 steel[J]. Die Mould Manufacture,2015,15(12):85(in Chinese).
张迁, 李长荣, 杨远梅. 稀土元素Ce对H13钢力学性能的影响[J]. 模具制造,2015,15(12):85.
7 Wei Dong. Effect of Ce on microstructure and mechanical properties of H13 steel[D]. Inner Mongolia: Inner Mongolia University of Technology,2015(in Chinese).
魏东. 稀土Ce对H13钢组织和力学性能的影响[D]. 内蒙古: 内蒙古工业大学,2015.
8 Pu S J, Yang H P, Wang H B, et al. Effect of rare earth Ce on high temperature friction and wear property of pack boronized H13 steel[J]. Chinese Mater Res,2015,29(7):481(in Chinese).
濮胜君, 杨浩鹏, 汪宏斌, 等. 稀土对 H13 钢固体渗硼层高温摩擦磨损性能的影响[J]. 材料研究学报,2015,29(7):481.
9 Liang B Q, Zhang C, Xu C. Constitutive equation of hot deformation for H13 steel electroslag ingot[J]. Heat Treatment,2010,25(6):44(in Chinese).
梁宝钱, 张驰, 徐春. H13 钢电渣锭热变形本构模型的研究[J]. 热处理,2010,25(6):44.
10 Wang Huanmin. Research on thermal deformation behavior and microstructure of 4Cr5MoSiV1 alloy[D]. Harbin: Harbin University of Science and Technology,2012(in Chinese).
王焕敏. 4Cr5MoSiV1 钢热变形行为及组织研究[D]. 哈尔滨: 哈尔滨理工大学, 2012
11 Kang F W, Wang H W, Zhang X M, et al. Hot deformation beha-vior and hot processing map of 4Cr5MoSiV1 steel[J]. Mater Sci,2013,3(1):1.
12 Zhang J X, Huang J F, Cui H, et al. High-temperature thermal deformation and microstructure evolution of spray formed H13 tool steel[J]. Hot Working Technol,2014,43(20):1(in Chinese).
张金祥, 黄进峰, 崔华, 等. 喷射成形 H13 钢的高温热变形及组织演变[J]. 热加工工艺,2014,43(20):1.
13 Raj R. Development of a processing map for use in warm-forming and hot-forming processes[J]. Metall Trans A,1981,12(6):1089.
14 Prasad Y V R K, Seshacharyulu T. Modelling of hot deformation for microstructural control[J].Int Mater Rev,1998,43(6):243.
15 周纪华, 管克智. 金属塑性变形阻力[M]. 北京:机械工业出版社,1989:9.
16 Jiang X, Song S H. Enhanced hot ductility of a Cr-Mo low alloy steel by rare earth cerium[J].Mater Sci Eng A,2014,613:171.
17 Momeni A, Dehghani K. Characterization of hot deformation beha-vior of 410 martensitic stainless steel using constitutive equations and processing maps[J]. Mater Sci Eng A,2010,527(21):5467.
18 Jonas J J, Sellars C M, Tegart W J M G. Strength and structure under hot-working conditions[J]. Metall Rev,1969,14(1):1.
19 Chen L, Wang L M, Du X J, et al. Hot deformation behavior of 2205 duplex stainless steel[J]. Acta Metall Sin,2010,46(1):52(in Chinese).
陈雷, 王龙妹, 杜晓建, 等. 2205 双相不锈钢的高温变形行为[J]. 金属学报,2010,46(1):52.
20 Jiang M F, Wang R, Li C L. Interaction of rare earths and micro alloying elements Nb, V and Ti in steel[J]. Chinese Rare Earths,2003,24(5):1(in Chinese).
姜茂发, 王荣, 李春龙. 钢中稀土与铌, 钒, 钛等微合金元素的相互作用[J]. 稀土,2003,24(5):1.
21 Liu H L, Liu C J, Jiang M F. Effects of rare earths on the austenite recrystallization behavior in X80 pipeline steel[J].Adv Mater Res,2010,129-131:542.
22 Chen L,Long H J,Liu X G, et al. Effect of rare earth alloying on creep rupture of economical 21Cr-11Ni-N heat-resistant austenitic steel at 650 ℃[J]. J Rare Earths,2016,34(4):447.
23 Prasad Y V R K,Rao K P,Sasidhara S.Hot working guide: A compendium of processing maps[M].Ohio:ASM International,2015.
24 Ziegler H. Progress in solid mechanics[M]. New York:John Willey and Sons,1963:93.
25 Li J R, Gong C, Chen L, et al. Hot deformation behavior of blades steel 10Cr12Ni3Mo2VN for ultra-supercritical units[J]. Acta Metall Sin,2014,50(9):1063(in Chinese).
李俊儒, 龚臣, 陈列, 等. 10Cr12Ni3Mo2VN 超超临界机组用叶片钢的热变形行为[J].金属学报,2014,50(9):1063.
26 Wen Z, Yi D Q, Wang B, et al. Effect of rare earths on the recrystallization behavior of T91 heat-resistent steel[J]. J University of Science and Technology Beijing,2013,35(8):1000(in Chinese).
文智, 易丹青, 王斌, 等. 稀土对 T91 耐热钢动态再结晶行为影响[J]. 北京科技大学学报,2013,35(8):1000.
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
