热熔预浸工艺及热熔热固性树脂的研究进展*

doi:10.11896/j.issn.1005-023X.2017.07.015

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1412KB)
Export: BibTeX | EndNote (RIS)

Abstract Hot melt prepreg technology is a low-cost and environmentally benign process that is compatible with on-line continuous production. The advantages of hot-melt prepreg technology make it an ideal candidate for the future high-performance composites molding process. Owing to the inherent brittleness of thermosetting resins, the wide application of thermosetting resin in the hot melt prepreg technology is limited. Therefore, in order to meet the demand of high performance composite, research on thermosetting resins in hot melt prepreg technology is pivotal. In the paper, thermosetting resin such as epoxy resin, isocyanate resin, phenolic resin which has been intensively researched in hot melt prepreg technology are reviewed.

Key words： hot melt prepreg technology prepreg epoxy resin phenolic resin benzoxazine

Published: 10 April 2017 Online: 2018-05-08

CLC number:

TB324

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIANG Xue
	LIU Feng
	LEI Zixuan
	LU You
	LIU Yuhong
	JING Xinli

Cite this article:

JIANG Xue,LIU Feng,LEI Zixuan, et al. Advances in Hot-melt Thermosetting Resin and Its Prepreg Technology[J]. Materials Reports, 2017, 31(7): 94-100.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.07.015 OR https://www.mater-rep.com/EN/Y2017/V31/I7/94

1 Tejado A, Pena C, Labidi J,et al. Physico-chemical characterization of lignins from different sources for use in phenol-formaldehyde resin synthesis[J]. Biores Technol,2007,98:1655.
2 Xu Yan, Li Wei. Manufacturing methods of prepreg material[J]. Fiber Reinf Plast Compos, 2013(9):3(in Chinese).
徐燕, 李玮. 国内外预浸料制备方法[J]. 玻璃钢/复合材料, 2013 (9):3.
3 Liu Baofeng, Li Peilan. Study on the manufacture technology of large tow carbon fiber prepreg with hot-melt method[J]. J Mater Eng,2004(4):46(in Chinese).
刘宝锋, 李佩兰. 热熔法制备大丝束碳纤维预浸料工艺研究[J]. 材料工程, 2004(4):46.
4 Kang Haixia, Gao Dianbin. The general design and realization of prepreg machine[D]. Tianjin: Tianjin Polytechnic University,2006(in Chinese).
康海霞, 高殿斌. 预浸机的总体设计及实现[D]. 天津: 天津工业大学,2006.
5 Chang Chuxin, Xu Dongliang. Research on prepreg preparation equipment and key techniques of hot-melt method[D]. Wuhan: Wuhan University of Technology,2012(in Chinese).
常处辛, 徐东亮. 热熔法预浸料制备及其关键技术和研究[D]. 武汉: 武汉理工大学,2012.
6 Sang Ruyue, Wang Bei. The research of equipment for width-web hot-melt prepreg system of compound material[J]. Light Ind Mach,2006,24(2):135(in Chinese).
桑如岳, 王蓓. 宽幅热熔预浸复合材料生产设备的研制[J]. 轻工机械,2006,24(2):135.
7 Liu Baofeng, Li Peilan, et al. Study on the technology of hot-melt prepregs[J]. Hi-Tech Fiber Appl,2000,25(4):38(in Chinese).
刘宝锋, 李佩兰, 张凤翻. 热熔法预浸料制备工艺研究[J]. 高科技纤维与应用,2000,25(4):38.
8 Han Zhicheng. Technology research of resin in hot-melt method [J]. China Adhes,2014(5):57(in Chinese).
韩智成. 热熔树脂胶膜制备工艺研究[J]. 中国胶黏剂,2014(5):57.
9 赵德仁, 张慰盛. 高聚物合成工艺学[M]. 第2版.北京:化学工业出版社,1996.
10 Thomas Neumeyer, GianCarlo Bonotto, Johannes Kraemer, et al. Fire behaviour and mechanical properties of an epoxy hot-melt resin for aircraft interiors[J]. Compos Interface,2013,20(6):443.
11 Liu Mingchang, Wu Wei. Preparation and properties research of carbon fiber reinforced epoxy resin prepreg and composites[D]. Shanghai: East China University of Science and Technology,2012(in Chinese).
刘明昌, 吴唯. 碳纤维增强环氧树脂预浸料及其复合材料制备与性能研究[D]. 上海: 华东理工大学, 2012.
12 Anoop Anand, Rahul Harshe, Makarand Joshi. Resin film infusion: Toward structural composites with nanofillers[J]. J Appl Polym Sci,2013,129(3):1618.
13 Bi Hongzhang. Rapid curing epoxy prepreg and carbon fiber/nylon 6 with cars[J]. Hi-Tech Fiber Appl,2013(6):68(in Chinese).
毕鸿章. 快速固化环氧树脂预浸料及为汽车用的碳纤维/尼龙6带子[J]. 高科技纤维与应用, 2013(6):68.
14 Wu Xiang, Wu Wei. Preparation and performance research of long-shelf life and low temperature carbon fiber/epoxy resin for hot-melt prepreg [D]. Shanghai:East China University of Science and Technology,2012(in Chinese).
吴祥, 吴唯. 热熔法长效低温碳纤维/环氧树脂预浸料的制备及其性能研究[D]. 上海: 华东理工大学, 2012.
15 Fu Qiangang, Li Hejun, Shen Xuetao. Domestic research process of matrix modification for carbon/carbon composites[J]. Mater China,2011(11):7(in Chinese).
付前刚, 李贺军, 沈学涛. 国内C/C复合材料基体改性研究进展[J]. 中国材料进展,2011(11):7.
16 Li Yinwen, et al. The synthesis and pro-perties of silicone modified epoxy resins[J]. Fine Chem,2008(11):1041(in Chinese).
李因文, 沈敏敏, 马一静,等.有机硅改性环氧树脂合成与性能[J]. 精细化工, 2008(11):1041.
17 Li Mingqi, Li Peng, Yang Xiaoping. The preparation of moderate temperature curing epoxy resins used as hot-melt prepreg[J]. Fiber Reinf Plast Compos,2009(1):34(in Chinese).
李明琦, 李鹏, 杨小平. 热熔预浸料用中温固化环氧树脂体系的制备[J]. 玻璃钢/复合材料2009(1):34 .
18 钟翔屿, 包建文, 李晔. 采用热熔树脂基体制备高韧性热熔预浸料的方法:中国, CN102922855A[P]. 2013-02-13.
19 Hanerton I. Chemistry and technology of cyanate esters[M]. Chapman and Hall, Glasgow:Blackie Academic & Professional,1994.
20 Hanerton I,et al.Water uptake effects in re-sins based on alkenyl modified cyanate ester bismaleimide blends[J].Polym Int,2001,50:475.
21 Liang Guozheng, Qin Huayu, et al. Modification of bisphenol-A cyanate resin[J]. New Chem Mater,1999(6):29(in Chinese).
梁国政, 秦华宇, 陆玲,等. 双酚A型氰酸树脂的改性研究[J]. 化工新型材料,1999(6):29.
22 Zhong Xiangyu, et al. Study on kine-tics of cyanate esters and its modified resin[J]. Thermosett Resin,2006(1):12(in Chinese).
钟翔屿, 包建文, 陈祥宝,等. 氰酸酯及其改性树脂体系的反应动力学研究[J]. 热固性树脂,2006(1):12.
23 Li Wenfeng, Xin Wenli, Liang Guozheng. Cure reaction of cyanate ester resins and the catalyst[J]. J Aeronaut Mater,2003,23(2):56(in Chinese).
李文峰, 辛文利, 梁国正. 氰酸酯树脂的固化反应及其催化剂[J]. 航空材料学报,2003,23(2):56.
24 Liu Yi, Huo Wenjing, Fu Tong, et al. Study on modification of cyanate resin[J]. Fiber Reinf Plast Compos,2010(6):75(in Chinese).
刘意, 霍文静, 付彤,等. 氰酸酯树脂增韧改性的研究进展及发展方向[J]. 玻璃钢/复合材料,2010(6):75.
25 林再文, 商伟辉, 刘永琪等.一种热熔预浸料用氰酸树脂及其制备方法:中国,CN10105038223A[P]. 2015-11-11.
26 Gao Tangling, Fu Gang, et al. Study on the properties of a modified cyanate ester resin[J]. Chem Adhes,2015,37(3):187(in Chinese).
高堂铃, 付刚, 王冠,等. 一种改性氰酸酯树脂性能的研究[J]. 化学与黏合, 2015,37(3):187.
27 Wang Fan, Wang Jialiang, Zhu Yaping, et al. preparation of cyanate eater resin for hot-melt impregnation[J]. Aerosp Mater Technol,2009(1):25 (in Chinese).
王帆, 王家梁, 朱亚平,等.适用于热熔法制备预浸料的氰酸树脂的制备[J]. 宇航材料工艺,2009(1): 25.
28 Wang Lei, Lin Na, Pan Lingying. Performance of a new type of cyanate ester resin and composite materials[J]. Aerosp Mater Technol,2012(4):45(in Chinese).
王磊, 林娜, 潘玲英. 新型改性氰酸酯及其复合材料性能[J]. 宇航材料工艺,2012(4):45.
29 Ji Fenglong, Gu Yi, Xie Meili, et al. Synthesis and properties of a novel kind of benzoxazine precursors[J]. China Plast Ind,2001(2):28(in Chinese).
纪凤龙, 顾宜, 谢美丽,等. 一种新型苯并噁嗪中间体的合成及其固化性能研究[J]. 塑料工业,2001(2):28.
30 Shi Hanqiao, Ding Changfang, Sun Baogang, et al. Properties of SW280 fabric/benzoxazine prepregs prepared by hot-melt impregnation[J]. Fiber Reinf Plast Compos,2015(2):51(in Chinese).
史汉桥, 丁常方, 孙宝岗,等. SW280玻璃布/苯并噁嗪热熔法预浸料的性能研究[J]. 玻璃钢/复合材料, 2015(2):51.
31 Wang Zhi, Gu Yi. Research development of carbon fiber reinforced benzoxazine resin composites[J]. Fiber Reinf Plast Compos,2011(4):68(in Chinese).
王智, 顾宜. 碳纤维增强苯丙噁嗪树脂基复合材料的研究进展[J]. 玻璃钢/复合材料,2011(4):68.
32 Ishida H, Allen D J. Physical and mechanical characterization of near-zero shrinkage polybenzoxazines[J]. J Polym Sci Part B: Polym Phys,1996,34(6):1019.
33 Gu Yi, Zhong Chifeng, Xie Meili. New matrix based on benzoxazine for resin transfer molding(RTM) and their composites[J]. Acta Mater Compos Sin,2000(4):32(in Chinese).
顾宜, 钟赤峰, 谢美丽. 用于RTM成型工艺的苯并恶嗪树脂及其复合材料[J]. 复合材料学报,2000(4): 32.
34 Ran Qichao, Gao Nian, Li Peiyuan, et al. Processing property of a RTM benzoxazine resin and properties composites[J]. Acta Mater Compos Sin,2011(1):15(in Chinese).
冉启超, 高念, 李培源,等. 一种RTM用苯并噁嗪树脂的工艺性及其复合材料的性能[J]. 复合材料学报, 2011(1):15.
35 Zhang Qi, Ran Qichao, Gu Yi. Study on a modified benzoxazine re-sin with good flame retardancy for hot-melt impregnation[J]. Fiber Reinf Plast Compos,2016(2):67(in Chinese).
张琪, 冉启超, 顾宜. 一种适用于热熔法制备预浸料的阻燃性改性苯并噁嗪树脂的研究[J]. 玻璃钢/复合材料,2016(2):67.
36 Ma Pengchang, Liu Jingfeng, Fan Weifeng. Long chain bismaleimide modified cyanate ester resin and its composites[J]. Chem J Chin Univ,2013(8):1979.
马鹏常, 刘敬峰, 范卫锋. 长链双马来酰亚胺改性氰酸酯树脂及其复合材料[J]. 高等学校化学学报, 2013(8):1979.
37 Liang Dan, Liang Guozheng, Wang Jiucheng. A new review on toughening modification of bismaleimide resin[J]. Mater Rev,2007,21(9):77(in Chinese).
梁丹, 梁国正, 王九成. 双马来酰亚胺树脂增韧改性研究新进展[J]. 材料导报,2007,21(9):77.
38 Gong Dajun, Yu Jie, Jin Shuanghua. Developments of toughening modification of bismaleimide resin [J]. Insulating Mater, 2011,44(1):41(in Chinese).
宫大军, 郁杰, 金双华,等. 双马来酰亚胺增韧改性的研究进展[J]. 绝缘材料,2011,44(1):41.
39 Zhao Bo, Wang Qiling. Modified research of BMI resin[J]. Chem Intermed,2011(10):41(in Chinese).
赵勃, 王琦玲. 双马来酰亚胺树脂的改性研究[J]. 化工中间体,2011(10):41.
40 张宝艳, 许健翔, 李敏,等. 新型耐高温双马来酰亚胺树脂体系研究[C]∥第十四届全国复合材料学术会议.湖北,2006.
41 马建忠, 孙占红, 阳晓辉. 热熔二步法制备Cf/QY9611预浸料工艺研究[C]∥第17届全国复合材料学术会议. 北京, 2012.
42 赵渠森. 先进复合材料手册[M]. 北京:机械工业出版社, 2003.
43 Chen Lixin, Wang Dongdong. Study on boron-modified phenolic re-sin suitable for hot-melt impregnation technique[D]. Xi’an: Northwestern Polytechnical University,2016(in Chinese).
陈立新, 王东东. 适用于热熔预浸工艺的硼改性酚醛树脂研究[D]. 西安: 西北工业大学,2016.
44 梁滨, 陈立新, 董建娜,等. 一种热固性酚醛树脂膜的制备方法: 中国,CN101845198A[P]. 2010-10-04.
45 姜雪, 刘育红, 井新利, 等. 热熔法法酚醛树脂/纤维预浸料的制备工艺及其性能研究[C]∥SAMPE2016年会国际学术会议.上海,2016.
46 刘育红, 井新利, 姜雪,等. 一种热熔法酚醛树脂预浸料及其制备方法:中国,CN105056351A[P]. 2015-11-25.