| RESEARCH PAPER | 
									
										
		  							 | 
          							
		  									  								 
		  									  							|
		  									  								 
		  									  							 | 
        						 
      						 
      					 | 
  					 
  					
    					 | 
   					 
   										
    					| Influences of Annealing Tension on Recrystallization Texture and Magnetic Properties of Non-oriented Silicon Steel | 
  					 
  					  										
						| LI Dechao1,2, DONG Junhui1, CHEN Haipeng3, WANG Haiyan2
 | 
					 
															
						1 School of Materials Science and Engineering,Inner Mongolia University of Technology, Hohhot 010051; 2 School of Material and Metallurgy,Inner Mongolia University of Science and Technology, Baotou 014010; 3 Inner Mongolia First Machinery Group Corporation, Baotou 014032; | 
					 
										
						 | 
					 
				 
				
				
					
						
							
								
									
										
											
                        					 
												
													
													    | 
													    	
														 | 
													 
																										
													
														
															
													
													    | 
													     		                            						                            																	    Abstract  The recrystallization texture of non-oriented electrical steel under different annealing stress was investigated by orien-tation distribution function analysis. The result showed that the size of the recrystallization grain increased with the increase of annealing tension. When annealing tension was 4 MPa, the average diameter of grain reached the maximum of 75 μm with even size,and Goss texture and cube texture component were enhanced,as P1.5/50 was reduced to 4.34 W·kg-1 and B50 increased to 1.684 T. When annealing tension increased to 6 MPa, the grain size would decrease to 40 μm,leading to the decrease of intensity of  {110}〈001〉 and {001}〈100〉texture, the increase of density of {111} fiber and the visible deterioration of magnetic property.
																										     | 
														 
														
														
															| 
															    															    															    																	Published: 25 January 2017
															    																																	Online:  2018-05-02
															    															 | 
														 
														 														
															| 
																
															 | 
														 
																																									    																														 
															 | 
																															
															
													    	
															 | 
																
															
														 
														
													 
													
												 
												
												
												
												
																					            
									                
																														  
																 1 毛卫民,杨平.电工钢的材料学原理[M].北京:高等教育出版社,2013:116. 2 何忠治,赵宇,罗海文.电工钢[M]. 北京:冶金工业出版社,2012:137. 3 An Zhiguo,Hou Huanyu,Liu Hongqiang,et al. Effect of annealing temperature on magnetic anisotropy energy of a non-oriented electrical steel [J].Trans Mater Heat Treat,2014,35(2):100(in Chinese). 安治国,侯环宇,刘宏强,等.退火温度对无取向电工钢磁晶各向异性能的影响[J].材料热处理学报,2014,35(2):100. 4 Zhang Zhiyi,Mao Weimin,Gao Zhenyu,et al. Influence of processing parameters on recrystallization texture of cold rolling non-oriented silicon steel [J]. Trans Mater Heat Treat,2010,31(6):102(in Chinese). 张智义,毛卫民,高振宇,等.工艺参数对冷轧无取向硅钢再结晶织构的影响[J].材料热处理学报,2010,31(6):102. 5 Park J T, Kim J K, Szpunar J A. Recrystallisation, grain growth and texture evolution in nonoriented electrical steels[J]. Mater Sci Forum,2007,558:657. 6 Jong-tae P, Szpunar J A. Texture development during grain growth in nonoriented electrical steels[J]. ISIJ Int,2005,45(5):743. 7 Li N, Ma L, Xiang L,et al. Evolution of texture in a 2.8%Si non-oriented electrical steel annealed at 1100 ℃[J].Mater Trans JIM,2014,55:387. 8 Freitas F, Silva M R, Tavares S, et al. Texture and microstructure evolution during box annealing of a non-oriented grain electrical steel [J]. Mater Sci Forum,2012,702:595. 9 Paolinelli S C, Cunha M A. Effect of stress relief annealing temperature and atmosphere on the magnetic properties of silicon steel[J]. J Magn Magn Mater,2006,304:599. 10 Zhou Shunbing, Feng Dajun. Effect of stress in nonoriented silicon steel on texture and grain boundary development during grain growth [J]. Mater Eng,2012(9):74(in Chinese). 周顺兵,冯大军. 无取向硅钢晶粒长大过程中应力对织构和晶界变化的影响[J].材料工程,2012(9):74. 11 Lim A T, Haataja M, Cai W, et al. Stress-driven migration of simple low-angle mixed grain boundaries[J]. Acta Mater,2012,60(3):1395. 12 Winning M. Grain boundary engineering by application of mechanical stresses[J].Scr Mater,2006,54(6):987. 13 Murakami K, Tarasiuk J, Réglé H, et al. Study of the texture formation during strain induced boundary migration in electrical steel sheets[J]. Mater Sci Forum,2004,467-470:893. 14 Premkumar R, Samajdar I, et al. Relative effect(s) of texture and grain size on magnetic properties in a low silicon non-grain oriented electrical steel[J]. J Magn Magn Mater,2003,264:75. 15 Heo N H,Kim S B,Choi Y S,et al. Interfacial segregation, nucleation and texture development in 3% silicon steel[J].Acta Mater,2003,51(17):4953.
  | 
															   
																													 
									             
									            												
												
												
												
											
											 
											
											 
										 
									 | 
								 
							 
						 | 
					 
				 
				
			
		 |