苯甲酸钠改性石墨作为锂离子电池负极材料的性能

doi:10.11896/j.issn.1005-023X.2017.018.002

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2528KB)
Export: BibTeX | EndNote (RIS)

Abstract Graphite electrode was modified with different concentrations of sodium benzoate (C₇H₅O₂Na) solutions for application as an anode material for lithium ion battery. The electrochemical characterization of graphite modified with sodium benzoate was carried out by galvanostatic charge/discharge test, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Results showed that the graphite modified with C₇H₅O₂Na exhibits significantly better cycle efficiency and greater reversible capacity than original graphite, and the first reversible charge/discharge specific capacity of modified graphite anode approaches 293.9 mAh/g and 326.4 mAh/g at 0.5C, higher than that of untreated graphite. The reason is that electrolyte interface film formed on the graphite surface could hinder the graphite expansion and benefit Li⁺migration. Simultaneously, quantum chemistry method was cited for calculating the lowest-unoccupied (LUMO) and highest-occupied (HOMO) molecular orbital energies. All supporting surface analyses and electrochemical results demonstrated the optimum concentrations of C₇H₅O₂Na modified graphite electrodes are 1wt%. Moreover, the effects of modified graphite electrodes on electrochemical properties of batteries also were discussed at elevated temperature and under the optimum C₇H₅O₂Na concentration.

Key words： modified graphite sodium benzoate quantum chemistry method elevated temperature property lithium ion battery anode material

Published: 25 September 2017 Online: 2018-05-08

CLC number:

TB34

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Ting
	LI Aiju
	ZHANG Litian
	CHEN Hongyu

Cite this article:

ZHANG Ting,LI Aiju,ZHANG Litian, et al. Characterization of Graphite Modified with Sodium Benzoate as Anode Material for Lithium Ion Battery^*[J]. Materials Reports, 2017, 31(18): 5-10.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.018.002 OR https://www.mater-rep.com/EN/Y2017/V31/I18/5

1 Besenhard J O, Winter M, Yang J, et al. Filming mechanism of lithium-carbon anodes in organic and inorganic electrolytes[J]. J Power Sources, 1995,54(2):228.
2 Fukuta K, Kikuya K, Isono K, et al. Foliated natural graphite as the anode material for rechargeable lithium-ion cells[J]. J Power Sources, 1997,69(1-2):165.
3 Abe T, Fukuda H, Iriyama Y, et al. Solvated Li-ion transfer at interface between graphite and electrolyte[J]. J Electrochem Soc, 2004,151(8):A1120.
4 Zheng H H, Fu Y B, Zhang H C, et al. Potassium salts electrolyte additives for enhancing electrochemical performances of natural graphite anodes[J]. Electrochem Solid State, 2006,9(3):A115.
5 Komaba S, Watanabe M, Groult H. Alkali chloride coating for graphite electrode of lithium-ion batteries[J]. J Electrochem Soc, 2010,157(12):A1375.
6 Nadeau G, Song X Y, Masse M, et al. Effect of heat-treatment and additives on the particles and carbon fibers as anodes for lithium-ion batteries[J]. J Power Sources, 2002,108(1-2):86.
7 Zhuang Q C, Li J, Tian L L. Potassium carbonate as film forming electrolyte additive for lithium-ion batteries[J]. J Power Sources, 2013,222:177.
8 Wrodnigg G H, Besenhard J O, Winter M. Cyclic and acyclic sulfite: New solvents and electrolyte additives for lithium ion batteries with graphitic anodes[J]. J Power Sources, 2001,97-98:592.
9 Ota H, Sato T, Suzuki H, et al. TPD-GC/MS analysis of the solid electrolyte interface (SEI) on a graphite anode in the propylene carbonate/ethylene sulfite electrolyte system for lithium batteries[J]. J Power Sources, 2001,97-98:107.
10Chen L B, Wang K, Xie X H, et al. Effect of vinylene carbonate (VC) as electrolyte additive on electrochemical performance of Si film anode for lithium ion batteries[J]. J Power Sources, 2007,174:538.
11Komaba S, Ishikawa T, Yabuuchi N, et al. Fluorinated ethylene carbonate as electrolyte additive for rechargeable Na batteries[J]. Appl Mater Interfaces, 2011,3:4165.
12Wrodnigg G H, Wrodnigg T M, Besenhard J O, et al. Propylene sulfite as film-forming electrolyte additive in lithium ion batteries[J]. Electrochem Commun, 1999,1:148.
13Lee J T, Wu M S, Wang F M, et al. Effects of aromatic esters as propylene carbonate-based electrolyte additives in lithium-ion bat-teries[J]. J Electrochem Soc, 2005,152(9):A1837.
14Komaba S, Itabashi T, Kaplan B, et al. Enhancement of Li-ion battery performance of graphite anode by sodium ion as an electrolyte additive[J]. Electrochem Commun, 2003,5:962.
15Komaba S, Itabashi T, Watanabe M, et al. Electrochemistry of graphite in Li and Na salt co-dissolving electrolyte for rechargeable batteries[J]. J Electrochem Soc, 2007,154:A322.
16Choi Y K, Chung K, Kim W S, et al. Suppressive effect of Li₂ CO₃ on initial irreversibility at carbon anode in Li-ion batteries[J]. J Power Sources, 2002,104(1):132.
17Shin J S, Han C H, Jung U H,et al. Effect of Li₂ CO₃ additive on gas generation in lithium-ion batteries[J]. J Power Sources, 2002,109(1):47.
18Komaba S, Watanabe M, Groult H, et al. Impact of sodium salt coating on a graphite negative electrode for lithium-ion batteries[J]. J Electrochem Soc,2006,9:A130.
19Komaba S, Watanabe M, et al. Alkali carbonate-coated graphite electrode for lithium-ion batteries[J]. Carbon,2008,46:1184.
20Komaba S, Itabashi T, Kimura T, et al. Opposite influences of K⁺versus Na⁺ions as electrolyte additives on graphite electrode performance[J]. J Power Sources, 2005,146(1-2):166.
21Liao L X, Cheng X Q. Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO₄ electrode[J]. Electrochim Acta, 2013,87:466.
22Han Y K, Lee K J. Computational screening of solid electrolyte interphase forming additives in lithium-ion batteries[J]. Computat Theor Chem, 2014,1031:64.
23Aurbach D, Gamol K, Markovs B, et al. The study of surface phenomena related to electrochemical lithium intercalation into Li_xMO_y host materials (M=Ni, Mn)[J]. J Electrochem Soc, 2000,147:1322.
24Zhang S S, Xu K, Jow T R. EIS study on the formation of solid electrolyte interface in Li-ion battery[J]. Electrochim Acta, 2006,51:1636.
25Huang Y G, Lin X L, Pan Q C, et al. Al@C/expanded graphite composite as anode material for lithium ion batteries[J]. Electrochim Acta, 2016,193:253.