基于工业合金激光熔覆制备Fe基非晶涂层<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.016.020

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1623KB)
Export: BibTeX | EndNote (RIS)

Abstract High-density amorphous coating with FeCoCrMoCBY bulk alloy as cladding material was fabricated by laser cladding on the surface of mild steel. The effect of different laser power on formation and microstructure of the coatings was discussed. The microhardness and corrosion resistance of the coating were tested by microhardness tester and electrochemical work station. The results show that the coatings of good formation and typically metallurgical bonding with the substrate is obtained,when laser power are changing from 17.6 W to 20.8 W with other parameter fixed. With the increase of laser power, the dilution rates go up, the tendency of cracks rise and the degree of amorphization decrease in the coating. When laser power is 17.6 W, the coating is mainly amorphous, the dilution rate is less than 24.2%, and the structure of the coating is dense, which includes heat affected zone, bon-ding zone and cladding zone. Moreover, the average microhardness of the coating is 1 330HV, which is about 9 times higher than the substrate. And the coating has more excellent corrosion resistance than 316L stainless steel in the 3.5% NaCl solution.

Key words： laser cladding industrial-grade alloy Fe-based amorphous coating laser power microstructure characterization

Published: 25 August 2017 Online: 2018-05-07

CLC number:

TG174.4

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GONG Yubing
	WANG Shanlin
	ZHANG Ziyang
	LI Hongxiang
	CHEN Yuhua

Cite this article:

GONG Yubing,WANG Shanlin,ZHANG Ziyang, et al. Fabrication of Amorphous Coating by Laser Cladding Using Industrial-grade Fe-based Alloy[J]. Materials Reports, 2017, 31(16): 98-102.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.016.020 OR https://www.mater-rep.com/EN/Y2017/V31/I16/98

1 Bakare M S, Voisey K T, Chokethawai K, et al. Corrosion beha-viour of crystalline and amorphous forms of the glass forming alloy Fe₄₃Cr₁₆Mo₁₆C₁₅B₁₀ [J]. J Alloys Compd,2012,527:210.
2 王一禾, 杨膺善. 非晶态合金 [M]. 北京:冶金工业出版社,1989:185.
3 Xie Wenshuo,Zhu Zhenghou.The preparations and soft magnetic properties of Fe_73.4Cu₁Nb₃Si_13.5B₉Al_0.1 nanocrystalline alloy[J].J Funct Mater,2016,47(1):1222(in Chinese).
谢文硕,朱正吼.Fe_73.4Cu₁Nb₃Si_13.5B₉Al_0.1纳米晶合金制备及其软磁性能[J].功能材料,2016,47(1):1222.
4 Li Juan,Wang Shanlin,Gong Yubing,et al.Processing optimization and microstructure of FeSiB amorphous coating by laser cladding[J]. Chinese J Lasers,2016,43(1):0103006(in Chinese)
李娟,王善林,龚玉兵,等.激光熔覆FeSiB非晶涂层工艺及组织[J].中国激光,2016,43(1):0103006.
5 Li R F, Li Z G, Zhu Y Y, et al. Structure and corrosion resistance properties of Ni-Fe-B-Si-Nb amorphous composite coatings fabricated by laser processing[J].J Alloys Compd,2013,580:327.
6 Zhu Y Y, Li Z G, Li R F,et al. High power diode laser cladding of Fe-Co-B-Si-C-Nb amorphous coating:Layered microstructure and properties[J]. Surf Coat Technol,2013,235:699.
7 Wang Y F, Lu Q L, Xiao L J, et al. Laser cladding Fe-Cr-Si-P amorphous coatings on 304L stainless[J].Rare Metal Mater Eng,2014,43(2):0274.
8 Ye X Y, Shin Y C.Synthesis and characterization of Fe-based amorphous composite by laser direct deposition[J]. Surf Coat Technol,2014,239:34.
9 Zhou S F, Huang Y J, Zeng X Y. Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding[J]. Appl Surf Sci,2009,255(20):8494.
10 Gong Yubing,Wang Shanlin,Chen Yuhua,et al.Forming and mechanical properties of FeSiB amorphous ribbon joint with laser wel-ding[J]. Chinese J Lasers,2016,43(3):0303001(in Chinese).
龚玉兵,王善林,陈玉华,等.FeSiB 非晶薄带激光焊焊缝成形及接头力学性能[J].中国激光,2016,43(3):0303001.
11 Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys [J]. Acta Mater,2000,48(1):279.
12 Zhang Peilei,Yan Hua,Xu Peiquan,et al.Fe-Ni-B-Si-Nb amorphous and nanocrystalline composite coating prepared by laser cladding and remelting [J]. Chinese J Nonferrous Metals,2011,21(11):2846(in Chinese).
张培磊,闫华,徐培全,等.激光熔覆和重熔制备Fe-Ni-B-Si-Nb系非晶纳米晶复合涂层[J].中国有色金属学报,2011,21(11):2846.
13 Wang Bin, Zhou Cui, Zhu Jiaxiang, et al.Preparation and characteristics of paraffin microcapsule applied in building energy conversation[J]. J Funct Mater,2014,45(19):19070(in Chinese).
王斌,周翠,朱加祥,等.电弧堆焊铁基非晶/纳米晶复合涂层的组织及性能研究[J].功能材料,2014,45(19):19070.

14 Zhang S, Wu C L, Zhang C H.Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance[J]. Optics Laser Technol,2016,84:23.
15 Zhou Zheng,et al.Effects of yttriumon the glass-forming ability and corrosion resistance of Fe_50-xMo₁₄Cr₁₅C₁₅-B₆Y_x amorphous alloys[J]. Trans Beijing Institute of Technology,2008,28(5):455.
16 Wang S L, Li H X, Yi S,et al. Effect of Cr contents in Fe-based bulk metallic glasses on the glass forming ability and the corrosion resistance[J]. Mater Chem Phys,2009,113:878.