| RESEARCH PAPER |
|
|
|
|
|
| Preparation of Porous Carbon Nanofiber from Liquid Phenolic Resin and Its Characterization |
| TAO Lei1, ZHENG Yunwu1,2, DI Mingwei1, ZHANG Yanhua1, ZHENG Zhifeng2
|
1 College of Materials Science and Engineering, Northeast Forestry University, Harbin 150040;
2 Engineering Laboratory for Highly-efficient Utilization of Biomass, Yunnan Province;
University Key Laboratory for Biomass Chemical Refinery & Synthesis, Yunnan Province;
College of Materials Engineering, Southwest Forestry University, Kunming 650224 |
|
|
|
|
Abstract Porous carbon nanofiber (PCNF) was prepared through electrospinning, curing and carbonization with liquid phenolic resin and polyvinyl alcohol (PVA) as raw materials. The influence of PVA content on the properties of electrospun solution and fiber morphology was discussed. The obtained fibers were characterized by FTIR, TG, SEM, XRD and BET techniques. The results showed that a small amount of PVA could obviously improve the spin-ability of LPF. With the increase of PVA content, the morphology of fiber is more regular and the diameter is smaller. With the carbonization temperature increased, the LPF/PVA fiber pyrolysed gradually, most functional groups were eliminated, and the matrix turned into benzene fused ring structure. At the same time, the value of d(002) decreased, while the values of Lc and Lc/d(002) increased, which implied that arrangement of graphite crystal among of LPF/PVA fiber layers was regularly piled up, and both the carbon net structure and the graphitoidal degree of fiber were deve-loped and improved remarkably. When the carbonization temperature was 800 ℃,the carbon content of LPF/PVA fiber was higher than 55%. The specific surface and pore volume of LPF/PVA fiber increased gradually with the PVA content and the main structure was microporous. When the content of PVA was 8%, a PCNF structure with a surface area of 590 m2/g could be obtained.
|
|
Published:
Online: 2018-05-08
|
|
|
|
|
1 Naik J R, Bikshapathi M, Singh R K, et al. Preparation, surface functionalization, and characterization of carbon micro fibers for adsorption applications [J]. Environmental Eng Sci,2011,28(10):725.
2 Teng M, Qiao J, Li F, et al. Electrospun mesoporous carbon nanofibers produced from phenolic resin and their use in the adsorption of large dye molecules [J]. Carbon,2012,50(8):2877.
3 Lin C L, Cheng Y H, Liu Z S, et al. Metal catalysts supported on activated carbon fibers for removal of polycyclic aromatic hydrocarbons from incineration flue gas [J]. J Hazard Mater,2011,197:254.
4 Chen Y, Yue M, Huang Z H, et al. Electrospun carbon nanofiber networks from phenolic resin for capacitive deionization [J]. Chem Eng J,2014,252:30.
5 Arami-Niya A, Daud W M A W, Mjalli F S, et al. Production of microporous palm shell based activated carbon for methane adsorption: Modeling and optimization using response surface methodology [J]. Chem Eng Res Des,2012,90(6):776.
6 Suzuki K, Matsumoto H, Minagawa M, et al. Preparation of carbon fiber fabrics from phenolic resin by electrospray deposition [J]. Polym J,2007,39(11):1128.
7 Ma C, Song Y, Shi J, et al. Phenolic-based carbon nanofiber webs prepared by electrospinning for supercapacitors [J]. Mater Lett,2012,76:211.
8 Nan D, Liu J, Ma W. Electrospun phenolic resin-based carbon ultrafine fibers with abundant ultra-small micropores for CO2 adsorption [J]. Chem Eng J,2015,276:44.
9 Hu S, Hsieh Y L. Ultrafine microporous and mesoporous activated carbon fibers from alkali lignin [J]. J Mater Chem A,2013,1(37):11279.
10 You X, Koda K, Yamada T, et al. Preparation of electrode for electric double layer capacitor from electrospun lignin fibers [J]. Holzforschung,2015,69(9):1097.
11 Fong H, Chun I, Reneker D H. Beaded nanofibers formed during electrospinning [J]. Polymer,1999,40(16):4585.
12 Oroumei A, Fox B, Naebe M. Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin [J]. ACS Sustainable Chem Eng,2015,3(4):758.
13 Bommier C, Luo W, Gao W Y, et al. Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements [J]. Carbon,2014,76(9):165.
14 Frank E, Hermanutz F, Buchmeiser M R. Carbon fibers: Precursors, manufacturing, and properties [J]. Macromolecular Mater Eng,2012,297(6):493.
15 Li D N, Ma X J. Preparation and characterization of activated carbon fibers from liquefied wood [J]. Cellulose,2013,20(4):1649. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
