| COMPUTATIONAL SIMULATION |
|
|
|
|
|
A Simplified Constitutive Model of Ti-Ni Shape Memory Alloy Considering
Loading/Unloading Rate |
| YU Binshan1, FAN Yujiang2, WANG Sheliang1, YANG Tao1
|
1 School of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055;
2 School of
Architecture, Chang’an University, Xi’an 710061 |
|
|
|
|
Abstract Systematic study was conducted on variation regularity for stress-strain curve, feature points stress, dissipated energy, equivalent damping ratio of Ti-Ni shape memory alloy (SMA) wires changed with diameter of wires, strain amplitude, loa-ding rate and loading cyclic number. Combining with above experimental results, a simplified constitutive model for SMA considering loading/unloading rate was proposed, aiming at making up the disadvantage of phynomenological Brinson constitutive model that cannot describe dynamic mechanical property of SMA. Then, simulation of experimental SMA wires with this constitutive model was conducted. The average errors of feature points in stress-strain curve were only 3%. The results showed the proposed simplified rate-dependent constitutive model of SMA could satisfactorily describe the superelastic mechanical behavior of SMA during the stress-induced transformation, and reflect the influence of dominant factors such as loading/unloading rate and strain amplitude to the dynamic constitutive model. Therefore, with simple formulation, the constitutive model is useful for practical engineering application of SMA.
|
|
Published: 25 March 2017
Online: 2018-05-02
|
|
|
|
|
1 Xing Dejin. New SMA damper and application for seismic reduction and control of structures[D].Tianjin:Tiajin University,2008(in Chinese).
邢德进.新型SMA阻尼器及结构减震控制应用研究[D].天津:天津大学,2008.
2 Corbi O. Shape memory alloys and their application in sturctural oscillations attenuation[J]. Simulation Modeling Practice and Theory,2003,11(5-6):387.
3 Ren Wenjie, Li Hongnan, Song Gangbing,et al. Study on seismic response control of frame structure using innovative re-centring SMA damper[J].China Civil Eng J,2013,46(6):14(in Chinese).
任文杰,李宏男,宋钢兵,等.新型自复位SMA阻尼器对框架结构减震控制的研究[J].土木工程学报,2013,46(6):14.
4 Zhao Xiang. Theoretical and experiment research on seismic protection of ancient pagoda structures based on shape memory alloy[D].Xi’an: Xi’an University of Architecture Science and Technology,2008(in Chinese).
赵祥.应用形状记忆合金进行古塔结构抗震保护的理论和试验研究[D].西安:西安建筑科技大学,2008.
5 Ren Wenjie. Seismic response control of structures using superelastic shape memory alloy wires[D].Dalian:Dalian University of Tech-nology,2008(in Chinese).
任文杰.超弹性形状记忆合金丝对结构减震控制的研究[D].大连:大连理工大学,2008.
6 Brinson L C. One-dimensional constitutive behavior of shape me-mory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable [J]. J Intelligent Mater Systems Struct,1993,4:229.
7 Tanaka K, Sato Y. Phenomenological description of the mechanical behavior of shape memory alloys [J]. Trans JSME,1992,53(491):1368.
8 Liang C. The constitutive modeling of shape memory alloys [D].Virginia: Virginia Polytechnic Institute and State University,1990.
9 Wu Yunze. Study on mechanical properties and constitutive model of shape memory alloy[D].Guangzhou:South China University of Technology,2012(in Chinese).
吴昀泽.形状记忆合金的力学性能与本构模型研究[D]. 广州:华南理工大学,2012.
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
