电化学射流加工的电场仿真及实验研究

doi:10.11896/j.issn.1005-023X.2017.024.038

Abstract
Figure/Table
References
Related Citation (9)

Download:

Full Text ( PDF ) (1094KB)
Export: BibTeX | EndNote (RIS)

Abstract The removal model of electrochemical jet machining (ECJM) and three dimensional model of electric field simulation were established based on the electrolyte jet flow field. The electric field of ECJM was simulated by ANSYS, obtaining distribution of electric field on the surface of the anode workpiece. It also suggests that voltage and jet distance have a great influence on velocity of ECJM, jet angle, nozzle diameter and jet pressure have little influence on velocity of ECJM. The electrolyte concentration (conductivity) has no effect on electric field intensity of ECJM. However, the electrolyte concentration (conductivity) has a great influence on current density of ECJM, the electrolyte concentration has a great influence on speed of ECJM. The material removal rate experiments of ECJM were carried under different electrochemical jet process parameters. The experimental results show that the voltage and electrolyte concentration and jet distance have a great influence on material removal rate of ECJM. It is consistent with the electric field simulation. Finally, the experiments of surface morphology were carried with SKD11 steel dies. The experimental results show that the workpiece surface of ECJM exist “micro cracks” with NaCl solution as electrolyte, the workpiece surface of ECJM has no “micro cracks” with NaNO₃ solution as electrolyte. The Cr precipitate on the workpiece surface in the process of ECJM, the thickness of oxide film is uneven at machining region of workpiece surface.

Key words： electrochemical jet machining (ECJM) electric field simulation ANSYS removal model surface morphology

Published: 25 December 2017 Online: 2018-05-08

CLC number:

TG662

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Chengguang
	ZHANG Yong
	ZHANG Feihu

Cite this article:

ZHANG Chengguang,ZHANG Yong,ZHANG Feihu. Electric Field Simulation and Experiment of Electrochemical Jet Machining[J]. Materials Reports, 2017, 31(24): 191-199.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.024.038 OR https://www.mater-rep.com/EN/Y2017/V31/I24/191

1 Zhang Zhaoyang, Li Zhongyang, Qin Changliang,et al. Analysis ofstress-etching quality based on nanosecond pulse laser electrochemical machining[J]. Acta Phys Sin, 2013,62(9):094210(in Chinese).
张朝阳, 李中洋, 秦昌亮,等. 脉冲激光与电化学复合的应力刻蚀加工质量研究[J].物理学报, 2013,62(9):094210.
2 Zhu D, Xu H Y. Improvement of electrochemical machining accuracy by using dual pole tool[J]. J Mater Processing Technol, 2002,129:15.
3 Li Y, Zheng Y F, Yang G, et al. Localized electrochemical micromachining with gap control[J]. Sensors Actuators A: Phys, 2003,108:144.
4 Sharma S, Jain V K, Shekhar R. Electrochemical drilling of inconel superalloy with acidified sodium chloride electrolyte[J]. Int Adv Manufacturing Technol, 2002,19(7):492.
5 Datta M. Microfabrication by electrochemical metal removal[J]. IBM J Res Development, 1998,42(5):665.
6 Zhang Yunjuan, Xing Pifeng, Wei Jianjun, et al. Experimental study on electropolishing of tantalum in sulfuric acid-methanol[J]. Rare Metal Mater Eng, 2011,40(12):2184(in Chinese).
张运娟, 邢丕峰, 韦建军,等. 硫酸甲醇体系中电解抛光钽的实验研究[J]. 稀有金属材料与工程, 2011,40(12):2184.
7 Kozak J, Rajurkar K P, Balkrishna R. Study of electrochemical jet machining processes[J]. Trans ASME, Manufacturing Sci Eng, 1996,118(4):490.
8 Sen Mohan, Shan H S. Electro jet drilling using hybrid NNGA approach[J]. Robotics Computer-Integrated Manufacturing, 2007,23:17.
9 Sen M, Shan H S. Finite element analysis of the electro jet drilling process[J]. Int J Modeling Simulation, 2007,11(1):24.
10Wataru Natsu,Tomone Ikeda, Masanori Kunieda. Generating complicated surface with electrolyte jet machining[J]. Precision Eng, 2007,31:33.
11Kunieda M, Mizugai K, Watanabe S. Electrochemical micromachining using flat electrolyte jet[J]. CIRP Annals-Manufacturing Technol, 2011,60(1):251.
12Matthias Hackert-Oschatzchcn, Gunnar Mcichsner, Mike Zinecker, et al. Micro machining with continuous electrolytic free jet[J]. Precision Eng, 2012,36(4):612.
13Yang Peijian, Qu Ningsong, Liu Zhuang,et al. Investigation of micro-pits in the micro-electrolyte jet machining process[J]. Mechan Sci Technol Aerospace Eng, 2010,29(10):1291(in Chinese).
杨培剑, 曲宁松, 刘壮,等. 毛细管电极电液束加工微小凹坑试验研究[J]. 机械科学与技术, 2010,29(10):1291.
14Liu Jia, Xu Zhengyang, Wan Longkai, et al. Design and experiment of electrolyte flow mode in electrochemical machining of blisk[J]. Acta Aeronautica ET Astronautica Sinica, 2014,35(1):259(in Chinese).
刘嘉, 徐正扬, 万龙凯, 等. 整体叶盘叶型电解加工流场设计及实验[J]. 航空学报, 2014,2014,35(1):259.
15Zhang Hua, Xu Jiawen, Zhao Jianshe. Simulation and experimental research on jet electrolytic drilling[J]. China Mechan Eng, 2011,22(11):2624(in Chinese).
张华, 徐家文, 赵建社. 喷射电解加工小孔的数值模拟与实验研究[J]. 中国机械工程, 2011,22(11):2624.
16Feng Yuxiang, Xu Wenji, Yang Xiaolong,et al. Experimental research on electrolyte jet machining of 3J21 alloy[J]. Electro-machining Mould, 2014(2):33(in Chinese).
冯玉祥, 徐文骥, 杨晓龙, 等. 电液束加工3J21合金试验研究[J].电加工与模具, 2014(2):33.
17Li Xiaoxia, Li Fuyuan, Liu Pu,et al. Forming shape of narrow groove machined by electro jet machining[J]. Adv Mater Res, 2012,411:349.
18范植坚, 李新忠, 王天诚. 电解加工与复合电解加工[M]. 北京: 国防工业出版社, 2008.
19曹立礼. 材料表面科学[M]. 北京: 清华大学出版社, 2009.