高能电脉冲-超声滚压耦合技术对淬火态GCr15钢表面强化研究<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.02.018

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2136KB)
Export: BibTeX | EndNote (RIS)

Abstract The current study aimed at enhancing the surface properties of high-frequency quenched GCr15 steel by electropul-sing ultrasonic surface rolling process(EUSR). Experiments were put forward to reveal the surface microhardness, strengthen layer, surface quality, friction and wear behaviors. Compared with traditional ultrasonic surface rolling technology, EUSR technology not only enhanced the surface hardness, but also promoted the depth of surface strengthened layer by 100 μm. Axial roughness was reduced from Ra of 1.40 μm to Ra of 0.23 μm, and the electron flow force could accelerate the movement of dislocations and enhance the ability of pasting energy barrier, which promoted the healing of miro-cracks and leaded to a better surface quality. EUSR treatment could improve the friction and wear performance, and the wear resistance of EUSR sample was increased by about 50%. For high-frequency quenched GCr15 steel, the electroplasticity effect would promote the movement of dislocations and enhance the material surface plastic deformation, which was facilitated in spreading the plastic strain of ultrasonic rolling into the materials interior, therefore the surface properties had a remarkable improvement.

Key words： electropulsing ultrasonic surface rolling process plastic deformation microhardness surface qulity friction and wear behaviors

Published: 25 January 2017 Online: 2018-05-02

CLC number:

TB31

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Shuo
	XU Zizhen
	ZHANG Bing
	SONG Guolin
	HAN Bin
	TANG Guoyi

Cite this article:

ZHANG Shuo,XU Zizhen,ZHANG Bing, et al. Surface Properties of Quenched GCr15 Steel Enhanced by Electropulsing Ultrasonic Surface Rolling Process[J]. Materials Reports, 2017, 31(2): 82-86.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.02.018 OR https://www.mater-rep.com/EN/Y2017/V31/I2/82

1 Han H, Gao Y,Zhang Y,et al.Effect of magnetic field distribution of friction surface on friction and wear properties of 45 steel in DC magnetic field[J].Wear,2015,328:422.
2 Shi Zengmin,Zheng Yong,Feng Ping.Wear mechanism of cermet tools in cutting quenched medium carbon steel[J].Rare Metal Mater Eng,2007(S3):26(in Chinese).
石增敏,郑勇,丰平.金属陶瓷刀具切削淬火钢的磨损机理研究[J].稀有金属材料与工程,2007(S3):26.
3 Dai K,Shaw L. Comparison between shot peening and surface nanocrystallization and hardening processes[J]. Mater Sci Eng A,2007,463(1-2):46.
4 Aymen A A,Mansour M,Manfred W,et al. Effect of micro shot peening on the mechanical properties and corrosion behavior of two microstructure Ti-6Al-4V alloy [J].Appl Surf Sci,2016,363:50.
5 Suh C,Song G,Suh M,et al.Fatigue and mechanical characteristics of nano-structured tool steel by ultrasonic cold forging technology[J]. Mater Sci Eng A,2007,443(1-2):101.
6 Liu M,Li Y J,Ma Y,et al. Surface nanocrystallization and property of Ti6Al4V alloy induced by high pressure surface rolling [J].Surf Coat Technol,2016,289:94.
7 Remington B A,Allen P,Bringa E M,et al.Material dynamics under extreme conditions of pressure and strain rate[J].Mater Sci Tech-nol,2006,22(4):474.
8 Cao X J,Pyoun Y S,Murakami R.Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification[J].Appl Surf Sci,2010,256(21):6297.
9 Huang L,Lu J,Troyon M.Nanomechanical properties of nanostructured titanium prepared by SMAT[J]. Surf Coat Technol,2006,201(1-2):208.
10 Zhang Y S,Han Z,Wang K,et al.Friction and wear behaviors of nanocrystalline surface layer of pure copper[J].Wear,2006,260(9-10):942.
11 Abreu H F G,Tavares S S M,Carvalho S S,et al. Texture and microstructure of cold rolled and recrystallized pure niobium[J].Mater Sci Forum,2007,539-543:3436.
12 Wang Lingsheng,Ye Xiaoxin,Liu Tao.Effect of electropulsing assisted ultrasonic impact treatment on residual stress and microhardness of weld [J].Mater Rev:Res,2015,29(9):71(in Chinese).
王铃声,叶肖鑫,刘涛,等.电脉冲辅助超声冲击技术对焊缝残余应力及显微硬度的影响[J].材料导报:研究篇,2015,29(9):71.
13 Roland T,Retraint D,Lu K,et al.Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment[J].Scripta Mater,2006,54(11):1949.
14 Tian J W,Villegas J C,Yuan W,et al.A study of the effect of nanostructured surface layers on the fatigue behaviors of a C-2000 supe-ralloy[J]. Mater Sci Eng A,2007,468-470:164.
15 Liu Wencai,Dong Jie,Zhang Ping,et al.Research status of fatigue properies of surface treated magnesium alloys[J]. Mater Rev:Res,2008,22(7):91(in Chinese).
刘文才,董杰,张平,等.表面处理镁合金疲劳性能的研究现状[J].材料导报:研究篇,2008,22(7):91.
16 Lee W B,Cho K T,Kim K H,et al.The effect of the cementite phase on the surface hardening of carbon steels by shot peening[J]. Mater Sci Eng A,2010,527(21-22):5852.
17 Troitskii O A,Likhtman V I.Anisotropy of the effect of electron-beam and irradiation on the deformation process of zinc single crystals in the brittle state[J]. Dokl. Akad. Nauk SSSR,1963,148:332.
18 Xu Z, Tang G, et al.Research of electroplastic rolling of AZ31 Mg alloy strip[J].J Mater Process Technol,2007,182(1-3):128.
19 Wang H,Song G,Tang G,et al. Evolution of surface mechanical properties and microstructure of Ti6Al4V alloy induced by electropulsing-assisted ultrasonic surface rolling process [J]. J Alloys Compd,2016,681:146.
20 Samuel E I,Bhowmik A,Qin R.Accelerated spheroidization induced by high intensity electric pulse in a severely deformed eutectoid steel[J].J Mater Res,2010,25(6):1020.
21 Qin R S,Samuel E I,Bhowmik A.Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels[J].J Mater Sci,2011,46(9):2838.
22 Qin R S,Rahnama A,Lu W J,et al.Electropulsed steels[J].Mater Sci Technol,2014,30(9):1040.
23 Jiang Y,Tang G,Shek C,et al.On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg₁₇Al₁₂ phase in an aged Mg-9Al-1Zn alloy[J].Acta Mater,2009,57(16):4797.
24 Zhu R F,Tang G Y,Shi S Q,et al.Effect of electroplastic rolling on the ductility and superelasticity of TiNi shape memory alloy[J].Mater Des,2013,44:606.
25 Wang H,Song G,Tang G.Enhanced surface properties of austenitic stainless steel by electropulsing-assisted ultrasonic surface rolling process[J].Surf Coat Technol,2015,282:149.
26 Ye X,Yang Y,Tang G. Microhardness and corrosion behavior of surface gradient oxide coating on the titanium alloy strips under high energy electro-pulsing treatment[J].Surf Coat Technol,2014,258:467.
27 Pagnoux G,Fouvry S,Peigney M,et al.Influence of scratches on the wear behavior of DLC coatings[J].Wear,2015,330-331:380.
28 Nie X Y,Zhang P,Weiner A M,et al.Nanoscale wear and machining behavior of nanolayer interfaces[J].Nano Lett,2005,5(10):1992.
29 Huang J,Lee J,Li C.Nano-scratching and nano-machining in diffe-rent environments on Cr₂N/Cu multilayer thin films[J].Thin Solid Films,2011,519(15):4992.
30 Fu W,Chen C A,Huang K,et al.Nano-scratch evaluations of copper chemical mechanical polishing[J].Thin Solid Films,2013,529:306.