GH3625合金管材冷变形行为及热处理工艺研究*

doi:10.11896/j.issn.1005-023X.2017.010.015

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1355KB)
Export: BibTeX | EndNote (RIS)

Abstract The influence of cold deformation and heat treatment on microstructure and properties of the GH3625 alloy was studied through room-temperature compression test, mathematical model fitting, optical microscopy and Rockwell hardness and other means. Cold deformation constitutive equation of GH3625 alloy tubes was established. The results show that GH3625 alloy harde-ning law basically follows Hollomon equation, and the cold deformation was the main factor which affect the work hardening. With the increase of cold deformation extend, grain deformation degree raised, deformation uniformity of the grains gradually improved and average grain size decreased. With the increase of heat treatment temperature, the average grain size of the alloy first decreased and then climbed up. When the temperature was at the range of 1 100-1 250 ℃, grain growth activation energy reached 180.46 kJ/mol. Hardness declined with the increase of heat treatment temperature, the hardness values and the average grain size of the alloy kept in line with Hall-Patch relation.

Key words： GH3625 superalloy tubes cold deformation behavior work hardening heat treatment process average grain size

Published: Online: 2018-05-08

CLC number:

TG146.1+5

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DING Yutian
	GAO Yubi
	DOU Zhengyi
	GAO Xin
	JIA Zhi

Cite this article:

DING Yutian,GAO Yubi,DOU Zhengyi, et al. Study on Cold Deformation Behavior and Heat Treatment Process of GH3625 Superalloy Tubes[J]. Materials Reports, 2017, 31(10): 70-76.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.010.015 OR https://www.mater-rep.com/EN/Y2017/V31/I10/70

1 Zhang Hongbin.Inconel GH3625 alloy progress abroad [J]. Special Steel Technol,2000(3):69(in Chinese).
张红斌. 国外Inconel GH3625合金的进展[J].特钢技术,2000(3):69.
2 郭建亭.高温合金材料学[M].北京:科学出版社,2008.
3 中国航空材料手册编委会.航空材料手册[M].北京:中国标准出版社,2002.
4 Mittra J,Dubey J S,Banerjee S. Acoustic emission technique used for detecting early stages of precipitation during aging of Inconel GH3625[J]. Scr Mater,2003,49:1209.
5 冶军.美国镍基高温合金[M].北京:科学出版社,1978:228.
6 Tian Dang. Development and production of high-temperature alloy seamless tubulars[J]. Steel Pipe,2002,31(3):1(in Chinese).
田党. 高温合金无缝管材的研制与生产[J].钢管,2002,31(3):1.
7 He Songjiong. Study on processing of difficult-to-deform high temperature alloy of nickel base[J].Shanghai Steel Institute,1996(3):28(in Chinese).
何松炯.一种难变形镍基高温合金加工工艺的研究[J].上海钢研,1996(3):28.
8 Zhao Honglei, Liu Ming, Zhang Luqiang, et al. Study on forming process of GH3600 alloy tube for aerospace[J].Hot Work Technol,2014,43(11):140(in Chinese).
赵鸿磊,刘鸣, 张录强,等.航天用GH3600合金管成形工艺研究[J].热加工工艺,2014,43(11):140.
9 Guo Shengli,Li Defu,Guo Qingmiao,et al. Investigation on hot workability characteristics of Inconel GH3625 superalloy using processing maps[J]. J Mater Sci,2012,47:5867.
10 Li Defu, Wu Zhigang, Guo Shengli, et al.Study on the processing map of GHGH3625 Ni-based alloy deformed at high temperature[J]. Rare Met Mater Eng,2012(41):1026(in Chinese).
李德富, 吾志刚, 郭胜利, 等. GHGH3625镍基合金高温塑性变形加工图研究[J].稀有金属材料与工程,2012(41):1026.
11 Guo Qingmiao, Li Haitao, Li Defu, et al. Hot extrusion moulding process and microstructure evolution of GHGH3625 superalloy tubes[J]. Chin J Rare Met,2011,35(5):685(in Chinese).
郭青苗, 李海涛, 李德富, 等.GHGH3625合金管材热挤压成形工艺及组织演变的研究[J].稀有金属,2011,35(5):685.
12 Yan Shicai, Cheng Ming, Zhang Shihong, et al. High-temperature high-speed hot deformation behavior of Inconel alloy GH3625 [J].Chin J Mater Res,2010,24(3):239(in Chinese).
闫士彩, 程明, 张士宏, 等. Inconel GH3625合金的高温高速热变形行为[J]. 材料研究学报,2010,24(3):239.
13 卡恩R W, 哈森P, 克雷默E J. 材料科学与技术(第6卷)[M].北京: 科学出版社,1999:17.
14 Huang Kewen, Kong Fanya. Microstructure and mechanical property of cold drawn high strength 00Cr18Ni10N stainless steel wire[J].Acta Metall Sin,2009,45(3):275(in Chinese).
黄克文, 孔凡亚. 冷拔高强00Cr18Ni10N不锈钢丝显微组织与力学性能[J].金属学报,2009,45(3):275.
15 Huang C X, Yang G, Gao Y L, et al. Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP[J]. Mater Sci Eng A,2008,485:643.
16 俞汉清, 陈金德. 材料成形原理[M].北京: 机械工业出版社,1996,10.
17 Bian Fang, Su Guoyue, Kong Yafan, et al. Work hardening beha-vior of Inconel 718 [J]. Nonferrous Met,2005,57(1):1(in Chinese).
边舫,苏国跃,孔亚凡,等. Inconel 718合金加工硬化行为[J].有色金属,2005,57(1):1.
18 张俊善. 材料强度学[M]. 哈尔滨: 哈尔滨工业大学出版社,2004,55.
19 Hollomon J H. The effect of heat treatment and carbon content on the work hardening characteristics of several steels[J]. Trans ASM,1944,32:123.
20 Tian X, Zhang Y S. Mathematical description for flow curves of some stable austenitic steels[J].Mater Sci Eng,1994,174A:1.
21 Gao Yongsheng, Zhou Jihua, Lun Yixin, et al. Study on the mathe-matial model of flow stress of nonferrous under cold forming[J].J University of Scinence and Technology Beijing,1994,16(S):102(in Chinese).
高永生, 周纪华, 伦怡馨, 等.有色金属冷变形流动应力的数学模型[J].北京科技大学学报,1994,16(S):102.
22 Wang Zhigang, Yang Yujun, Tian Shuixian, et al. Influence of cold drawing process on microstructures and tensile properties of alloy GH3GH3625[J].J Iron Steel Res,2011(S2):92(in Chinese).
王志刚, 杨玉军, 田水仙, 等.冷拔变形对GH3GH3625合金组织和性能的影响[J].钢铁研究学报,2011(S2):92.
23 Zhao Yuxin. Cold deformation behavior of GHGH3625 alloy and their effects on the mechanical properties [J]. J Mater Eng,2000(9):36(in Chinese).
赵宇新. GHGH3625合金的冷变形及其力学性能的影响[J].材料工程,2000(9):36.
24 Sellars C M, Whiteman J A. Recrystallization and grain growth in hot rolling[J]. Metal Sci,1979,13:187.
25 Anelli E. Application of mathematical modelling to hot rolling and controlled cooling of wire rods and bars[J].ISIJ Int,1992,32:440.