6016铝合金多道次热轧过程微观组织数值模拟及实验研究

doi:10.11896/cldb.25030025

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (37718KB)
Export: BibTeX | EndNote (RIS)

Abstract ABAQUS numerical simulations combined with hot rolling experiments were conducted to investigate the effects of rolling pass number and deformation on the microstructural evolution of 6016 aluminum alloy during hot rolling. The results reveal that both of them significantly influence dynamic recrystallization (DRX) behavior and grain refinement. At a rolling temperature of 460 ℃, the deformation increased from 35.1% to 62.2%, and the DRX grain size reduced from 10.1 μm to 4.8 μm, while the DRX volume fraction increased from 5.8% to 11.6%. The electron backscatter diffraction (EBSD) analysis shows that dynamic recovery and shear stress during hot rolling generate numerous sub-grain boundaries and shear bands, which promote grain refinement. Experimental results demonstrate that the simulation results are in good agreement with the experimental observations, with an average prediction error of 14.8%. These findings demonstrate the reliability of the numerical model in predicting the overall microstructural evolution of the 6016 aluminum alloy during hot rolling.

Key words： 6016 aluminum alloy multi-pass hot rolling numerical simulation texture

Published: Online: 2026-04-16

CLC number:

TG339

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Xiaozhan
	LIU Letian
	HONG Zhiqiang
	WU Xiaoyan
	TIAN Shiwei
	JIANG Haitao
	CHEN Yulai

Cite this article:

LI Xiaozhan,LIU Letian,HONG Zhiqiang, et al. Simulation and Experimental Study on Microstructure of Multi-pass Hot Rolling Process of 6016 Aluminum Alloy[J]. Materials Reports, 2026, 40(7): 25030025-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.25030025 OR https://www.mater-rep.com/EN/Y2026/V40/I7/25030025

1 Zhang J X, Zhang K L, Liu Y T, et al. Rare Metals, 2014, 33(4), 404.
2 Ruo R, Li A M, Zuo T C, et al. Applied Physics A, 2023, 129(10), 690.
3 Xu D Z, Meng L G, Yang C F, et al. Materials China, 2022, 44(11), 880(in Chinese).
徐大招, 孟令刚, 杨春峰, 等. 中国材料进展, 2022, 44(11), 880.
4 Chanda M, Singh A K, Mukhopadhyay A K, et al. Materials Science and Engineering, A, 2013, 577(10), 87.
5 Dai S, Muhammad A K, Liao L H, et al. Journal of Alloys and Compounds, 2025, 1010(5), 177910.
6 Wu F F, Jiang F, Ye P C, et al. Materials Today Communications, 2025, 43, 111632.
7 Algendy A Y, Rometsch P, Chen X G. Materials Science and Enginee-ring, A, 2024, 896, 146275.
9 Yuan X K, Cui L. Rare Metal Materials and Engineering, 2019, 48(9), 2768.
10 Li Y C, Chi R, Li T, et al. Shanghai Metals, 2024, 46(5), 41(in Chinese).
李延成, 迟蕊, 李涛, 等. 上海金属, 2024, 46(5), 41.
11 Yu L, Liu Y, Zhang Y J, et al. Hot Working Technology, 2024, 53(13), 138(in Chinese).
喻亮, 刘远, 张亚坚, 等. 热加工工艺, 2024, 53(13), 138.
12 Abolhasani A, Zarei-Hanzaki A, Abedi H R, et al. Materials & Design, 2012, 34, 631.
13 Yan S T, Yang B, Jiang H T. Journal of Plasticity Engineering, 2024, 31(6), 87(in Chinese).
闫松涛, 杨斌, 江海涛. 塑性工程学报, 2024, 31(6), 87.
14 Yang G, Hao J Q, Wang H Z, et al. Procedia Manufacturing, 2020, 50, 51.
15 Cantergiani E, Riedel M, Karhausen K F, et al. Metallurgical and Materials Transactions A, 2024, 55(9), 3327.
16 Li J, Wu X Y, Jiang H T. Materials, 2024, 17(15), 3749.
17 Jagadish A R, Pereira A, Thorat A, et al. Materials Today, Proceedings, 2025, 1010(5), 177910.
18 Zhu Q F, Yan B, Feng Z X, et al. Journal of Northeastern University(Natural Science), 2023, 44(4), 502(in Chinese).
朱庆丰, 闫渤, 冯志鑫, 等. 东北大学学报(自然科学版), 2023, 44(4), 502.
19 Shabaniverki S, Serajzadeh S. Applied Mathematical Modelling, 2016, 40(17-18), 7571.