基于近场动力学的木材销槽承压非线性数值模拟与试验研究

doi:10.11896/cldb.24100137

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (24954KB)
Export: BibTeX | EndNote (RIS)

Abstract Timber material is sustainable and low carbon, therefore being more and more promoted and applied in the construction industry. Nonetheless, an accurate grasp of the material nonlinearity is important to numerically model and analyze the timber components. In this study, an anisotropic model based on peridynamics was developed and extended to analyze deformation and cracking damage in wood components under dowel bearing loads. Based on ASTM D5764-97a, two types of dowels with diameters of 8 mm and 24 mm were selected to test specimens of glulam dowel joints under parallel and perpendicular grain loading. The main failure results observed included longitudinal splitting along the grain and ductile crushing deformation perpendicular to the grain. Compared to the ductile failure in perpendicular loading, the parallel loading condition was prone to severe brittle splitting. Compared to perpendicular loaded, the bearing strength of the glulam specimens under parallel grain loading with two different diameters increased by 118% and 256%. Under different loading conditions, wood damage extended along the grain direction, and with increasing diameter, the specimen failure became more significant. As the dowel diameter increased from 8 mm to 24 mm, the bearing strength for the parallel and perpendicular grain specimens decreased by 33% and 59%, respectively. Additionally, a PD model for wood was used to numerically simulate the experimental results. The simulated results showed strong agreement with tested data in terms of crack locations and load-displacement curves, with Pearson correlation coefficients exceeding 0.98. The PD model effectively captured the various failure modes, bearing capacities, and mechanical behavior of the dowel-bearing specimens under different conditions.

Key words： timber peridynamics dowel connection dowel-bearing strength glulam timber structure

Published: 10 November 2025 Online: 2025-11-10

CLC number:

TU366

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAN Xinyi
	SHU Zhan
	XIE Jinwei

Cite this article:

GAN Xinyi,SHU Zhan,XIE Jinwei. Peridynamics-based Nonlinear Numerical Analysis and Experimental Verification on Dowel-bearing Behavior of Glulam Embedment[J]. Materials Reports, 2025, 39(21): 24100137-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24100137 OR https://www.mater-rep.com/EN/Y2025/V39/I21/24100137

1 Fu H Y, He M J. Journal of Building Materials, 2023, 26(10), 1117(in Chinese).
付海燕, 何敏娟. 建筑材料学报, 2023, 26(10), 1117.
2 Yang R Y, Zhang X F, Yuan Q, et al. Journal of Forestry Engineering, 2020, 5(5), 131(in Chinese).
杨茹元, 张晓凤, 袁权, 等. 林业工程学报, 2020, 5(5), 131.
3 Tuhkanen E, Molder J, Schickhofer G. Engineering Structures, 2018, 176(1), 361.
4 Ou J J, Long W G, Jin H, et al. Structures, 2023, 51, 1257.
5 Xu B H, Bouchair A, Taazount M, et al. Journal of Wood Science, 2013, 59(1), 17.
6 Cao J, Xiong H, Liu Y. Construction and Building Materials, 2021, 270, 121380.
7 Dourado N, Pereira F, Moura M. Engineering Structures, 2012, 34, 342.
8 Huang D, Zhang Q, Qiao P Z, et al. Advances in Mechanics, 2010, 40(4), 448(in Chinese).
黄丹, 章青, 乔丕忠, 等. 力学进展, 2010, 40(4), 448.
9 Qin H Y, Liu Y M, Huang D. Journal of Zhejiang University (Engineering Science), 2018, 52(3), 497(in Chinese).
秦洪远, 刘一鸣, 黄丹. 浙江大学学报(工学版), 2018, 52(3), 497.
10 Shen F, Zhang Q, Huang D, et al. Journal of Computational Mechanics, 2013, 30(S1), 79(in Chinese).
沈峰, 章青, 黄丹, 等. 计算力学学报, 2013, 30(S1), 79.
11 Oterkus E, Madenci E. Journal of Mechanics of Materials and Structures, 2012, 7(1), 45.
12 Hai S A, Cheng Z Q, Li M H. American Journal of Engineering Research, 2020, 9(7), 71.
13 Silling S A. Journal of the Mechanics and Physics of Solids, 2000, 48(1), 175.
14 Liu W, Yan K, Li J Q, et al. Construction and Building Materials, 2020, 268(4), 121190.
15 Kharouf N, Mcclure G, Smith I. Computers and Structures, 2003, 81(8-11), 747.
16 Oterkus E, Madenci E, Weckner O, et al. Composite Structure, 2012, 94(3), 839.
17 Ha Y D, Bobaru F. International Journal of Fracture, 2010, 162(1/2), 229.
18 Xu J F, Askari A, Weckner O. Journal of Aerospace Engineering, 2008, 21(3), 187.
19 NDS-2015. National design and specification for wood construction, USA, 2015.
20 ASTM D5764-97a. Standard test method for evaluating dowel-bearing strength of wood and wood-based products, USA, 2018.
21 Shu Z, Li Z, Yu X S, et al. Construction and Building Materials, 2019, 213, 675.
22 Zhang Q, Gu X, Yu Y T. Journal of Theoretical and Applied Mechanics, 2016, 48(1), 56(in Chinese).
章青, 顾鑫, 郁杨天. 力学学报, 2016, 48(1), 56.
23 Dai Z L, Xie J W, Lu Z T, et al. Mathematics, 2021, 9(22), 2848.