| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Research and Application Status of Laser-assisted Cold Spraying Technology |
| TAO Liqing1,2, GUO Weiling2,*, WANG Huipeng1,*, ZHAO Yuncai1, MA Guozheng2, WANG Haidou2,3
|
1 School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China
2 National Key Laboratory for Remanufacturing, Army Armored Force Institute, Beijing 100072, China
3 National Engineering Research Center for Remanufacturing, Army Academy of Armored Force, Beijing 100072, China |
|
|
|
|
Abstract Cold spraying technology is a surface modification technology with low temperature solid deposition, the low temperature characteristic of which makes it easy to produce cold hardening, weak bonding strength and large porosity during the spraying process. Therefore, employing the laser in the cold spraying process to form a "cold spraying+" composite technology, which uses laser synchronous irradiation of the matrix and spray particles to achieve the heating and softening of the matrix and spray particles, improves the plastic deformation ability of the particles, thereby improving the deposition efficiency of the particles, enhancing the bonding strength of the coating, and improving the comprehensive performance of the coating. In this paper, the research progress of laser assisted cold spraying technology is reviewed and summarized, and the principle and classification of single cold spraying technology and "cold spraying+" technology are summarized. Laser assisted cold spraying composite technology and its influence parameters are emphatically analyzed. The practical application fields of laser assisted cold spraying technology are summarized. It is expected to provide reference for the research and application of laser assisted cold spraying technology.
|
|
Published: 15 August 2025
Online: 2025-08-15
|
|
|
|
|
1 Alkhimov A P, Kosarev V F, Papyrin A N. Soviet Physics Doklady, 1990, 35, 1047.
2 Alkhimo A P, Papyrin A N, Kosarev V F, et al. U. S. patent, EP5302414, 1994.
3 Yin S, Cavaliere P, Aldwell B, et al. Additive Manufacturing, 2018, 21, 628.
4 Wu J, Jin H Z, Wu M J, et al. Materials Reports, 2003(1), 59(in Chinese).
吴杰, 金花子, 吴敏杰, 等. 材料导报, 2003(1), 59.
5 Assadi H, Kreye H, Gärtner F, et al. Acta Materialia, 2016, 116(4), 382.
6 Ogawa K, Ito K, Ichimura K, et al. Journal of Thermal Spray Technology, 2008, 17, 728.
7 Shi Z C, Liu D X, Zhang X Y, et al. Materials Reports, 2012, 26(17), 70(in Chinese).
石仲川, 刘德鑫, 张晓云, 等. 材料导报, 2012, 26(17), 70.
8 Guo W L, Xing Z G, Li P, et al. Materials Reports, 2024, 38(19), 23010049(in Chinese).
郭伟玲, 邢志国, 李鹏, 等. 材料导报, 2024, 38(19), 23010049.
9 Yang L J, Li Z X, Huang C L, et al. Materials Reports, 2018, 32(3), 412(in Chinese).
杨理京, 李争显, 黄春良, 等. 材料导报, 2018, 32(3), 412.
10 Li B, Yao J H, Zhang Q L, et al. Surface & Coatings Technology, 2015, 275, 58.
11 Luo F, Rocco L, Andrew C, et al. Iron and Steel Research Journal, 2013, 20(2), 52.
12 Raoelison R N, Verdy C H, Liao H. Materials & Design, 2017, 133, 266.
13 Guan Y D, Yuan B, Long L, et al. Materials Reports, 2008(5), 100(in Chinese).
关乐丁, 严彪, 龙玲, 等. 材料导报, 2008(5), 100.
14 Bu H Y, Lu C. Journal of Materials Engineering, 2010(1), 94(in Chinese).
卜恒勇, 卢晨. 材料工程, 2010(1), 94.
15 Yang K. Research on the non-uniformity and regulation of cold spray sediment organization and performance. Ph. D. Thesis, Northwestern Polytechnical University, China, 2019(in Chinese).
杨康. 冷喷涂沉积体组织与性能不均匀性及调控研究. 博士学位论文, 西北工业大学, 2019.
16 Xiong T Y. Machinist Metal Forming, 2003(9), 10(in Chinese).
熊天英. 机械工人(热加工), 2003(9), 10.
17 Klassen T, Gartner F, Schmidt T, et al. Materialwissenschaft und Werkstofftechnik, 2010, 41(7), 575.
18 Liao T Y, Biesiekierski A, Berndt C C, et al. Progress in Surface Science, 2022, 97(2), 100654.
19 Ma C C, Yu Y G, Zhang D M, et al. Thermal Spray Technology, 2020, 12(2), 11(in Chinese).
马春春, 于月光, 章德铭, 等. 热喷涂技术, 2020, 12(2), 11.
20 Julio V. Cold Spray in the Realm of Additive Manufacturing, 2020, 19.
21 Almangour B, Mongrain R, Irissou E, et al. Surface & Coatings Technology, 2013, 216(3), 297.
22 Sima A, Wu L, et al. Wear, 2024, 538, 205218.
23 Munagala V N V, Torgerson T B, Thomas W S, et al. Wear, 2019, 426, 357.
24 Photo courtesy of Plasma Giken Co. Ltd. [DB/OL]. [2021-02-21]. http://www. plasma. co. jp/en/.
25 Photo courtesy of VRC Metal Systems[DB/OL]. [2021- 02-21]. https://vrcmetalsystems. com/.
26 Singh H, Sidhu T S, Kalsi S B S, et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2013, 35(3), 231.
27 Diab M, Xin P, Jahed H. Surface and Coatings Technology, 2017, 309, 423.
28 Feng L, Chang J L, Li D T, et al. Rare Metal Materials and Engineering, 2020, 49(6), 2009(in Chinese).
冯力, 畅继荣, 李洞亭, 等. 稀有金属材料与工程, 2020, 49(6), 2029.
29 Photo courtesy of centerline_LTD[DB/OL]. [2021-02-21]. https://www. supersonicspray. com/.
30 Photo courtesy of inovati[DB/OL]. [2021-02-21]. https://www. inovati. com/index. php.
31 Photo courtesy of obninsk center for powder spraying ltd[DB/OL]. [2021-02-21]. http://en. dymet. net/.
32 Ma K, Li C X. China Surface Engineering, 2020, 33(4), 26(in Chinese).
马凯, 李成新. 中国表面工程, 2020, 33(4), 26.
33 Jörg E, Tobias N, Dominik H, et al. Advanced Materials, 2020, 32(19), 1908104.
34 Ma K, Li C J, Li C X. Journal of Thermal Spray Technology, 2020, 30(3), 571.
35 Barmouz M, Givi M K. Applied Science & Manufacturing, 2011, 42(10), 1445.
36 Yang L J, Li Z H, Li B, et al. Chinese Journal of Lasers, 2015, 42(3), 227.
杨理京, 李祉宏, 李波, 等. 中国激光, 2015, 42(3), 227.
37 Wang M Y, Chang D X, Yu B Y, et al. Advanced Engineering Materials, 2023, 25(2), 2200955.
38 Chen W C. Process and properties of plasma-assisted low-pressure cold spraying copper coating. Master's Thesis, Shenyang University of Technology, China, 2022(in Chinese).
陈文超. 等离子辅助低压冷喷涂铜涂层工艺及性能. 硕士学位论文, 沈阳工业大学, 2022.
39 Zhou H X, Li C X, Ji G, et al. Journal of Alloys and Compounds, 2018, 766, 694.
40 Cai S. Study on preparation of Al-Zn coating based on cold spray-shot peening technology. Master's Thesis, Nanjing University of Aeronautics and Astronautics, China, 2021(in Chinese).
蔡顺. 基于冷喷涂-喷丸复合工艺的Al-Zn涂层制备工艺技术研究. 硕士学位论文, 南京航空航天大学, 2021.
41 Bray M, Cockburn A, O’Neill W. Surface and Coatings Technology, 2010, 203(19), 2851.
42 Yao J H, Wu L J, Li B, et al. Chinese Journal of Lasers, 2019, 46(3), 9(in Chinese).
姚建华, 吴丽娟, 李波, 等. 中国激光, 2019, 46(3), 9.
43 Olakanmi E O, Doyoyo M. Journal of Thermal Spray Technology, 2014, 23(5), 765.
44 Pedro P, Miguel Ángel G M. Progress in Materials Science, 2022, 123, 100839.
45 Yuan L J, Luo F, Yao J H, et al. Applied Laser, 2012, 32(4), 331(in Chinese).
袁林江, 骆芳, 姚建华, 等. 应用激光, 2012, 32(4), 331.
46 Diao P Y, Wang F, Chu X, et al. Hot Working Technology, DOI:10. 14158/j. cnki. 1001-3814. 20223075(in Chinese).
刁鹏源, 王方, 褚欣, 等. 热加工工艺, DOI:10. 14158/j. cnki. 1001-3814. 20223075.
47 Assadi H, Kreye H, Gärtner F, et al. Acta Materialia, 2016, 116(4), 382.
48 Ma S Y, Liu M J, Yang G J, et al. China Surface Engineering, DOI:10. 11933/j. issn. 1007-9289. 20230327002(in Chinese).
马式跃, 刘梅军, 杨冠军, 等. 中国表面工程, DOI:10. 11933/j. issn. 1007-9289. 20230327002.
49 Dykhuizen R C, Smith M F. Journal of Thermal Spray Technology, 1998, 7(2), 205.
50 Morgan R, Fox P, Pattison J, et al. Materials Letters, 2004, 58(7), 1317.
51 Li P H. Research on WC/SS316L composite coating prepared by supersonic laser deposition. Master's Thesis, Zhejiang University of Technology, China, 2017(in Chinese).
李鹏辉. 超音速激光沉积WC/SS316L复合沉积层的研究. 硕士学位论文, 浙江工业大学, 2017.
52 Liu S D. Microstructure and wear resistance of wc/ni60 composite coatings prepared by supersonic laser deposition. Master's Thesis, Lanzhou University of Technology, China, 2018(in Chinese).
刘世铎, 超音速激光沉积WC/Ni60复合涂层组织与耐磨损性能研究. 硕士学位论文, 兰州理工大学, 2018.
53 Riveiro A, Lusquiños F, Comesaña R, et al. Applied Surface Science, 2007, 254(4), 926.
54 Zhang C, Zhang D B, Luo C, et al. Coatings, 2021, 11(3), 267.
55 Lupoi R, Sparkes M, Cockburn A, et al. Materials Letters, 2011, 65(21), 3205.
56 Yao J H, Yang L J, Li B, et al. Materials & Design, 2015, 83, 26.
57 Legoux J G, Guerreiro B, Jason D, et al. In:International Thermal Spray Conference and Exposition. Quebec City, 2021.
58 Qi Z W, Li Y M, Chu X, et al. Surface and Coatings Technology, 2024, 477, 130308.
59 Wang K, Zhao L J, Mao T L, et al. Materials Science and Engineering, 2023, 879, 145224.
60 Grujicic M, Zhao C L, DeRosset W S. Materials & Design, 2005, 25(8), 681.
61 Victor K C, Dennis J H, Surya P G D, et al. Journal of Thermal Spray Technology, 2011, 20(3), 425.
62 Gu S, Kamnis S. Surface and Coatings Technology, 2009, 203(22), 3485.
63 Venkatesh L, Naveen M C, Sundararajan G. Journal of Thermal Spray Technology, 2011, 20(5), 1009.
64 Ning X J, Jang J H, Kim H J. Applied Surface Science, 2008, 253(18), 7449.
65 Klinkov S V, Kosarev V F, Rein M. Aerospace Science and Technology, 2006, 9(7), 582.
66 Marrocco T, McCartney D G, Shipway P H, et al. Journal of Thermal Spray Technology, 2006, 15(2), 263.
67 Olakanmi E O, Tlotleng M, Meacock C, et al. Journal of Operations Management, 2013, 65(6), 776.
68 Riveiro A, Lusquios F, Comesaa R, et al. Applied Surface Science, 2007, 254(4), 926.
69 Zhang D Y, Cao X Y, Li C Y. Electromachining & Mould, 2016(3), 42(in Chinese).
张冬云, 曹玄扬, 李丛洋. 电加工与模具, 2016(3), 42.
70 Luo F, Zhao B, Yao J H. Acta Armamentarii, 2015, 36(11), 2157(in Chinese).
骆芳, 赵兵, 姚建华. 兵工学报, 2015, 36(11), 2157.
71 Huang X J, Wu L J, Li B, et al. Journal of Mechanical Engineering, 2020, 56(10), 78(in Chinese).
黄煊杰, 吴丽娟, 李波, 等. 机械工程学报, 2020, 56(10), 78.
72 Kulmala M, Vuoristo P. Surface and Coatings Technology, 2009, 202(18), 4503.
73 Gorunov A I, Gilmutdinov A K. Optics & Laser Technology, 2017, 88, 157.
74 Yao J H, Yang L J, Li B, et al. Materials & Design, 2015, 83, 26.
75 Yang L J, Li B, Yao J H, et al. Diamond & Related Materials, 2015, 58, 139.
76 You Q, Zhang D M, Yu Y G, et al. Thermal Spray Technology, 2018, 10(2), 15.
酉琪, 章德铭, 于月光, 等. 热喷涂技术, 2018, 10(2), 15.
77 Wang W L, Wu L J, Li B, et al. Surface Technology, 2020, 49(8), 324.
汪伟林, 吴丽娟, 李波, 等. 表面技术, 2020, 49(8), 324.
78 Li B, Wu L J, Zhang X, et al. China Surface Engineering, 2018, 31(5), 159.
李波, 吴丽娟, 张欣, 等. 中国表面工程, 2018, 31(5), 159. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2025, Vol. 39 
