不锈钢-硬质聚氨酯复合材料超低温共底结构设计与分析

doi:10.11896/cldb.24060106

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (11713KB)
Export: BibTeX | EndNote (RIS)

Abstract Common bulkhead tank is an ideal propellant tank structure, which can reduce the mass of the launch vehicle and improve the structural efficiency of the rocket. In this work, a stainless steel/rigid polyurethane foam sandwich common bulkhead structure was designed for the liquid oxygen/liquid methane cryogenic propellant combination. The thermal insulation performance, strength, stiffness, and stability of the designed structure were analyzed and verified by finite element simulation. The results show that the designed structure can meet the thermal insulation requirements of low-temperature propellants, ensure the use of materials without failure under the combined action of low-temperature load and internal pressure, and the structure will not fail when the internal pressure difference between the two tank segments is less than 0.260 MPa. Through the design and analysis of the common bulkhead structure, it can provide the corresponding reference for the common bottom design of similar low-temperature storage tanks.

Key words： stainless steel foam common bulkhead tank cryogenic propellant finite element

Published: Online: 2025-08-28

CLC number:

V45

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GONG Ruiqi
	CUI Zhe
	DONG Xiaolei
	LIU Pengshan
	SUN Wei

Cite this article:

GONG Ruiqi,CUI Zhe,DONG Xiaolei, et al. Design and Analysis of Ultra-low Temperature Common Base Structure of Stainless Steel and Rigid Polyurethane Composite[J]. Materials Reports, 2025, 39(17): 24060106-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24060106 OR https://www.mater-rep.com/EN/Y2025/V39/I17/24060106

1 Pizzarelli M. Acta Astronautica, 2021, 184(5), 46.
2 Hu Z G, Wu H Q, Wang H P, et al. Aerospace China, 2022(S1), 81 (in Chinese).
胡正根, 吴会强, 王会平, 等. 中国航天, 2022(S1), 81.
3 Sumith S, Ramesh K R. Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 2022, 236(5), 900.
4 Zhou N N, Wu H X, Yang H P, et al. Journal of Harbin Institute of Technology, 2024, 56(8), 17 (in Chinese).
周尼宁, 吴瀚枭, 杨海鹏, 等. 哈尔滨工业大学学报, 2024, 56(8), 17.
5 Lee M C, Sim H C, Kim S G, et al. International Journal of Aeronautical and Space Sciences, 2023, 25(4), 1269.
6 Zhang W, Zhang H, Wang B, et al. Cryogenics, 2024, 143, 103943.
7 Singh Y P, Singh H, Sahu P K, et al. Defence Science Journal, 2022, 72(1), 3.
8 Zhang C W, Chai D D, Ma J Q, et al. Journal of Rocket Propulsion, 2023, 49(3), 1 (in Chinese).
张春伟, 柴栋栋, 马军强, 等. 火箭推进, 2023, 49(3), 1.
9 Marco P, Francesco B. Acta Astronautica, 2023, 209, 48.
10 Li K C, Wu Z J, Liu M J, et al. Materials Science Forum, 2020, 975, 182.
11 Ravet L. Air & Space Europe, 2000, 2(2), 68.
12 Pendleton E, Biggs R, Cochran R, et al. In:AIAA Space 2011 Confe-rence & Exposition. California, 2011, pp. 1767.
13 Zhang W D, Ding X F, Li J, et al. Aerospace China, 2019(3), 40 (in Chinese).
张卫东, 丁秀峰, 李军, 等. 中国航天, 2019(3), 40.
14 Song Z Y, Liu L D, Cheng X F, et al. Journal of Astronautics, 2023, 44(4), 476 (in Chinese).
宋征宇, 刘立东, 陈晓飞, 等. 宇航学报, 2023, 44(4), 476.
15 Zhang Z, Xu H P, Deng X Y, et al. Manned Spaceflight, 2022, 28(4), 427 (in Chinese).
张智, 徐洪平, 邓新宇, 等. 载人航天, 2022, 28(4), 427.
16 Gnanasekar S, Santhosh B, Rajamohan V, et al. International Journal of Mechanics and Materials in Design, DOI:10.1007/S10999-024-09723-7.
17 Marco V, Christian M, Stefan W. Journal of Spacecraft and Rockets, 2017, 54(1), 67.
18 Li Z Q, Nan H B, He F T, et al. Materials Science Forum, 2015, 3769(817), 639.
19 Choi D, Lee S, Kim S. International Journal of Pressure Vessels and Piping, 2024, 209, 105223.
20 Li Y, Wang J G, Yang J P, et al. Aerospace Materials & Technology, 2024, 54(2), 29 (in Chinese).
李雨, 王建刚, 杨菊鹏, 等. 宇航材料工艺, 2024, 54(2), 29.
21 Arbi E H, Kenza B, Mustapha F, et al. Heliyon, 2023, 9(3), 12565.
22 Pazhani A, Salman S S, Venkatraman M, et al. Journal of Composites Science, 2024, 8(7), 260.
23 Meng Y, Yu Z, Zhao Y. Thin-Walled Structures, 2024, 201, 112018.
24 Liu Z G, Xu M Z, Li Y, et al. Materials Reports, 2023, 37(S2), 370 (in Chinese).
刘自刚, 徐睦忠, 李洋, 等. 材料导报, 2023, 37(S2), 370.
25 Li M H. Missiles and Space Vehicles, 2024(4), 1 (in Chinese).
李明华. 导弹与航天运载技术, 2024(4), 1.
26 Yang Z R, Xue C L, Bin W. International Journal of Steel Structures, 2024, 24(3), 672.
27 Zheng J Y, Wang K, Huang Z, et al. Pressure Vessel Technology, 2014, 31(8), 1 (in Chinese).
郑津洋, 王珂, 黄泽, 等. 压力容器, 2014, 31(8), 1.
28 Yang W L, Chen G H, Chen Y, et al. Transactions of CSICE, 2003(2), 161 (in Chinese).
杨万里, 陈国华, 陈燕, 等. 内燃机学报, 2003(2), 161.