激光选区熔化制备M50NiL轴承钢回收粉末特性的变化

doi:10.11896/cldb.24050187

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (48494KB)
Export: BibTeX | EndNote (RIS)

Abstract As the representative of powder bed melting additive manufacturing technology, selective laser melting (SLM) has been widely used in aerospace, biomedical and automotive manufacturing fields due to its high forming precision and the surface quality of the forming parts. However, only 10%—20% of the metal powder is used for part manufacturing in SLM processes, and a large amount of metal powder must be recycled for reuse. Recycled powder is subjected to various factors such as laser irradiation and complex thermal histories during the manufacturing process, leading to changes in its characteristics such as particle size, surface morphology, chemical composition and flowability. In this work, taking the metal powder of M50NiL bearing steel as the research object, the changes in microstructure, phase composition, nitrogen and oxygen content, particle size distribution and flowability between the virgin and recycled powder were analyzed by means of scanning electron microscopy, oxygen and nitrogen analyzer, laser particle size analyzer and X-ray diffraction. The results showed that compared with the original powder, the volume fraction of fine particle size of recovered powder decreased, and the particle size of coarse particle size increased. Recycled powder exhibits better flowability than the virgin powder. Irregular particles with non-smooth surfaces, including agglomerates, partially melted particles, partially/fully oxidized particles, condensed metal vapor and splatter droplets, are emerged in the recycled powder. The oxygen content gradually increases with the cycles, while the nitrogen content remains unchanged. The phase composition of the recycled powder is the same as that of the virgin, but the interplanar spacing and crystallinity increased.

Key words： selective laser melting M50NiL steel recycled powder powder reuse powder characteristics

Published: 25 November 2025 Online: 2025-11-14

CLC number:

TG665

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Zhenshuai
	LI Jiwen
	ZHANG Xin
	LI Shunjie
	LIU Wei
	XU Liujie

Cite this article:

WANG Zhenshuai,LI Jiwen,ZHANG Xin, et al. Characterization of M50NiL Bearing Steel Recycled Powder in the Selective Laser Melting[J]. Materials Reports, 2025, 39(22): 24050187-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24050187 OR https://www.mater-rep.com/EN/Y2025/V39/I22/24050187

1 Li C L. Study on vacuumcarburizing processes of M50NiL steel. Master's Thesis, Harbin Institute of Technology, China, 2018 (in Chinese).
李长亮. M50NiL钢真空渗碳工艺研究. 哈尔滨工业大学, 2018.
2 Yang Y S, Wang B. Steel Rolling, 2020, 37(5), 35 (in Chinese).
杨雨松, 王斌. 轧钢, 2020, 37(5), 35.
3 Li J, Yan F, Wang J, et al. Powder Metallurgy Industry, 2024, 34(2), 116 (in Chinese).
李晶, 闫峰, 王锦, 等. 粉末冶金工业, 2024, 34(2), 116.
4 Liu C Y, Zhao B B, Li L J, et al. Powder Metallurgy Industry, 2020, 30(2), 83 (in Chinese).
柳朝阳, 赵备备, 李兰杰, 等. 粉末冶金工业, 2020, 30(2), 83.
5 Gaurav P, Hitesh V, Dharam B. International Journal on Interactive Design and Manufacturing, 2022, 17, 2221.
6 Uhlmann E, Bergmann A, Gridin W. Procedia CIRP, 2015, 35, 8.
7 Moghimian P, Poirié T, Habibnejad-Korayem M, et al. Additive Manufacturing, 2021, 43, 102017.
8 Zhao D L, Lin F. Chinese Journal of Mechanical Engineering, 2018, 29(17), 2100 (in Chinese).
赵德陈, 林峰. 中国机械工程, 2018, 29(17), 2100.
9 Gu D D, Zhang H M, Chen H Y, et al. Chinese Journal of Lasers, 2020, 47(5), 32 (in Chinese).
顾冬冬, 张红梅, 陈洪宇, 等. 中国激光, 2020, 47(5), 32.
10 Han T B, Zhang Y W, Tian X J, et al. Powder Metallurgy Industry, 2017, 27(6), 44 (in Chinese).
韩寿波, 张义文, 田象军, 等. 粉末冶金工业, 2017, 27(6), 44.
11 Mohd Y S, Choo E, Gao N. Metals, 2020, 10, 1625.
12 Powell D, Rennie A, Geekie L, et al. Journal of Cleaner Production, 2020, 268, 122077.
13 Sutton A T, Kriewall C S, Leu M C, et al. Additive Manufacturing, 2020, 32, 100904.
14 Simonelli M, Tuck C, Aboulkhair N T, et al. Metallurgical and Materials Transactions A, 2015, 46, 3842.
15 Liu Y, Yang Y Q, Mai S Z, et al. Materials & Design, 2015, 87, 797.
16 Slotwinski J A, Garboczi E J, Stutzman P E, et al. Journal of Research of the National Institute of Standards and Technology, 2014, 119, 460.
17 Heiden M J, Deibler L A, Rodelas J M, et al. Additive Manufacturing, 2019, 25, 84.
18 Grünberger T, Domröse R. Laser Technik Journal, 2015, 1, 45.
19 Matthews M J, Guss G, Khairallah S A, et al. Acta Materialia, 2016, 114, 33.
20 Ladewig A, Schlick G, Fisser M, et al. Additive Manufacturing, 2016, 10, 1.
21 Markl M, Körner C. Annual Review of Materials Research, 2016, 46, 93.
22 Sutton A T, Kriewall C S, Karnati S, et al. Additive Manufacturing, 2020, 32, 100981.
23 Groarke R, Danilenkoff C, Karam S, et al. Materials, 2020, 13, 5537.
24 Wu, Q, Qiao C, Wu Y, et al. Additive Manufacturing, 2023, 77, 103821.
25 Abd-Elghany K, Bourell D L. Rapid Prototyping Journal, 2012, 18, 420.
26 Zhou L J, Qiu W B, Xu P, et al. Powder Technology, 2024, 437, 119524.