1060-H24纯铝无轴肩微型搅拌摩擦焊的数值模拟分析

doi:10.11896/cldb.24020082

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (17106KB)
Export: BibTeX | EndNote (RIS)

Abstract A sequential thermodynamic coupling numerical model was established using ABAQUS finite element software to comparatively analyze the temperature field, stress and joint residual deformation distribution of the miniature friction stir welding process under two stirring tools, shoulder and shoulderless, and the boundary conditions of the heat source model were calibrated using experimental thermocouple temperature measurement. The results show that:the welded joints under the two stirring tools experience different temperatures of the welding thermal cycle, the measured peak temperature of the shoulder tool welded joints is about 362 ℃, while the peak temperature of the welded joints of shoulderless tool is only 143 ℃; the residual stress on the surface of the welded parts is symmetrically distributed in the center of the weld seam, and the shoulder tool residual stress is distributed in the platform of the shoulder region, and the maximum residual stress is 116 MPa. The residual stress on the shoulderless tool is distributed in a spike centered on the stirring needle, with a maximum residual stress of 34 MPa. The residual stress reflects the post-weld deformation, with the thin plate welded by the shoulder tool bulging upwards in the direction of the weld, with a maximum deflection of 2.817 mm. The thin plate welded by the shoulderless tool has no visible deformation, and the maximum deflection is only 0.008 1 mm. Therefore, the low heat input of the shoulderless miniature friction stir welding can effectively reduce the residual deformation of the thin-walled weldment, and improve the dimensional accuracy and assembly quality of the weldment.

Key words： micro friction stir welding finite element modelling temperature field stress-strain residual deformation

Published: 10 March 2025 Online: 2025-03-18

CLC number:

TG456.9

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Changqing
	MA Dongdong
	GU Huaizhuang
	WANG Dong
	LIU Enrong
	ZHANG Pengsheng

Cite this article:

ZHANG Changqing,MA Dongdong,GU Huaizhuang, et al. Numerical Analysis of Micro Stir Friction Welding of 1060-H24 Pure Aluminum Without Shoulder-less Stirring Tool[J]. Materials Reports, 2025, 39(5): 24020082-6.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24020082 OR https://www.mater-rep.com/EN/Y2025/V39/I5/24020082

1 Verma M, Ahmed S, Saha P. Journal of Manufacturing Processes, 2021, 68, 249.
2 Ahmed S, Saha P. International Journal of Advanced Manufacturing Technology, 2020, 106, 3045.
3 Ni Y, Fu L, Shen Z, et al. Journal of Manufacturing Processes, 2019, 48, 145.
4 Zhang C Q, Wang W J, Jin X, et al. Metals, 2019, 9, 507.
5 Schmidt H, Hattel J, Wert J. Modelling and Simulation in Materials Science and Engineering, 2004, 12, 143.
6 Huang Y X, Meng X C, Zhang Y B, et al. Journal of Materials Processing Technology, 2017, 250, 313.
7 Sattari S, Bisadi H, Sajed M. International Journal of Mechanics and Applications, 2012, 2, 1.
8 Fehrenbacher A, Schmale J R, Zinn M R, et al. Journal of Manufacturing Science and Engineering, 2014, 136(2), 021009.
9 Verma S, Misra J P. Materials Today:Proceedings, 2017, 4, 1350.
10 Zhu Z, Wang M, Zhang H J, et al. Journal of Plasticity Engineering, 2017, 24(2), 217(in Chinese).
朱智, 王敏, 张会杰, 等. 塑性工程学报, 2017, 24(2), 217.
11 Huang G. Simulation study of liquid-cooled heat sink inlet FSW temperature and residual state. Master’s Thesis, Kunming University of Science and Technology, China, 2021 (in Chinese).
黄敢. 液冷散热板入水口FSW温度及残余状态仿真研究. 硕士学位论文, 昆明理工大学, 2021.
12 Xing S L, Tang T X, Han B, et al. Science and Technology Innovation and Application, 2023, 13(21), 14 (in Chinese).
邢松龄, 唐天祥, 韩博, 等. 科技创新与应用, 2023, 13(21), 14.
13 Ma J L, Zeng Z Q, Sun Y B, et al. Welding Technology, 2021, 50(12), 27 (in Chinese).
马佳良, 曾泽群, 孙屹博, 等. 焊接技术, 2021, 50(12), 27.
14 Wang Y. Study on the effect of structural design on the thermal coupling of aluminum/steel continuous drive friction welding head. Master’s Thesis, Lanzhou University of Science and Technology, China, 2023(in Chinese).
王烨. 结构设计对铝/钢连续驱动摩擦焊接头热力耦合影响的研究. 硕士学位论文, 兰州理工大学, 2023.
15 Wang N L, Zeng Z Q, Sun Y B, et al. Modern Machinery, 2023(4), 33 (in Chinese).
王聂龙, 曾泽群, 孙屹博, 等. 现代机械, 2023(4), 33.
16 Yan D Y. Study and simulation of thermal-mechanical process of stir friction welding of aluminum alloy thin-walled structures. Ph. D. Thesis, Tsinghua University, China, 2010(in Chinese).
鄢东洋. 铝合金薄壁结构搅拌摩擦焊热—力学过程的研究及模拟. 博士学位论文, 清华大学, 2010.
17 Yan D Y, Shi Q Y Wu A P, et al. Journal of Metals, 2009, 45(2), 183 (in Chinese).
鄢东洋, 史清宇, 吴爱萍, 等. 金属学报, 2009, 45(2), 183.