光伏单晶硅片冲洗过程中应力分布的研究

doi:10.11896/cldb.24010045

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (12421KB)
Export: BibTeX | EndNote (RIS)

Abstract In the process of washing photovoltaic monocrystalline silicon wafer, the maximum stress may cause damage to the silicon wafer. The determination of the distribution of the stress on the silicon wafer and the maximum stress position on the silicon wafer are of great significance to reduce the damage of the silicon wafer. In this work, based on the Levy solution model of the short-shaped plate, the deflection and stress values of the silicon wafers of different sizes are calculated. Then, ABAQUS finite element software is used to simulate the stress generated in the process of silicon wafer washing. The results show that the maximum stress value appears on the free edge (y=b) or the fixed edge (y=0) when the wafer's aspect ratio b/a=2, 1 and 0.5 are calculated by using the Levy solution model of the short-shaped plate. When the wafer width a is fixed and the length b is gradually increased, the stress value is maximum when the aspect ratio b/a=0.5 on the fixed side, and the stress value is maximum when the aspect ratio b/a=0.9 on the free side. When the aspect ratio of the silicon wafer b/a=0.1—1.5, the maximum stress of the silicon wafer is distributed on the solid support edge, and when the aspect ratio of the silicon wafer b/a=1.5—2, the maximum stress of the silicon wafer is distributed on the free edge. The determination of the maximum stress position by the maximum deflection can reduce a lot of calculation, but it is not comprehensive and accurate. The results obtained by ABQUS finite element analysis are consistent with the stress distribution calculated by Levy solution model of rectangular plate, but there are some errors in the stress value. By combining the results of Levy solution model of rectangular plate with Mohr theory, the relation formula between the washing pressure and the thickness of silicon wafer is derived. When the thickness of the silicon wafer is determined, the maximum washing pressure that can be borne on the silicon wafer can be calculated; conversely, when the washing pressure is determined, the minimum thickness that will not be destroyed when the silicon wafer is washed can be obtained.

Key words： photovoltaic monocrystalline silicon the Levy's solution for a rectangular plate monocrystalline silicon sheet cleaning stress

Published: 10 April 2025 Online: 2025-04-10

CLC number:

TH145

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Tao
	LYU Guoqiang
	LI Yuxian
	QIAN Yichao
	ZHANG Jie

Cite this article:

LI Tao,LYU Guoqiang,LI Yuxian, et al. Study on Stress Distribution of Photovoltaic Monocrystalline Silicon Sheet During Washing[J]. Materials Reports, 2025, 39(7): 24010045-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24010045 OR https://www.mater-rep.com/EN/Y2025/V39/I7/24010045

1 Liu T Y, Ge P Q, Bi W B, et al. Solar Energy, 2017, 157, 427.
2 Li P H, GuoX G, Yuan S, et al. Applied Surface Science, 2021, 554, 149668.
3 Ge Peiqi, Chen Zibin, Wang Peizhi. Diamond and Abrasive Tools Engineering, 2020, 40(4), 12(in Chinese).
葛培琪, 陈自彬, 王沛志. 金刚石与磨料磨具工程, 2020, 40(4), 12.
4 Liu Tengyun, Ge Peiqi, Bi Wenbo, et al. Science in Semiconductor Processing, 2017, 57, 147.
5 Huang S X. Study on the influence of surface quality of smooth crystal silicon on its photogenic volt effect. Master's Thesis, The Huaqiao University, China, 2022(in Chinese).
黄仕相. 光面晶体硅表面质量对其光生伏特效应的影响研究. 硕士学位论文, 华侨大学, 2022.
6 Gao Yufei, Ge Peiqi, Li Shaojie. Journal of Artificial Crystals, 2009, 38(2), 372(in Chinese).
高玉飞, 葛培琪, 李绍杰. 人工晶体学报, 2009, 38(2), 372.
7 Costa E C, Xavier F A, Knoblauch R, et al. Solar Energy, 2020, 207, 640.
8 Liu Tengyun, Ge Peiqi, Bi Wenbo, et al. Materials Science in Semiconductor Processing, 2017, 71, 133.
9 Li Zongping, Cheng Dameng. Journal of artificial crystal, 2023, 52(8), 1378(in Chinese).
李宗平, 程大猛. 人工晶体学报, 2023, 52(8), 1378.
10 Li Z Q. Study on the influence of crystal anisotropy on the crystal shape deviation of diamond wire saw slicing. Ph. D. Thesis, Shandong University, China, 2021(in Chinese).
李宗强. 晶体各向异性对金刚石线锯切片加工的晶片面形偏差影响研究. 博士学位论文, 山东大学, 2021.
11 Tian Hailan, Han Tao, Yan Shaohua, et al. Manufacturing Technology & Machine Tool, 2023(3), 24(in Chinese).
田海兰, 韩涛, 闫少华, 等. 制造技术与机床, 2023(3), 24.
12 Wang Yan, Huang Shengju, Qian Zhaofeng, et al. Engineering Fracture Mechanics, 2023, 278, 109029.
13 Song Shuang, Gou Xianfang, Wang Liting, et al. Solar Energy, 2023(6), 50(in Chinese).
宋爽, 勾宪芳, 王丽婷, 等. 太阳能, 2023(6), 50.
14 Chen Yuanxin, Ma Yingying, Chen Yunqing, et al. China Integrated Circuits, 2023, 32(5), 80(in Chinese).
陈远新, 马英英, 陈芸清, 等. 中国集成电路, 2023, 32(5), 80.
15 Zhang Qian. Electronic Testing, 2015(13), 151(in Chinese).
张倩. 电子测试, 2015(13), 151.
16 Fan Hongna, Yang Hongxing. Special Equipment for Electronic Industry, 2016, 45(8), 27(in Chinese).
范红娜, 杨洪星. 电子工业专用设备, 2016, 45(8), 27.
17 Wang Lingyu. Special Equipment for Electronic Industry, 2018, 47(2), 27(in Chinese).
王玲玉. 电子工业专用设备, 2018, 47(2), 27.
18 Lei Denghui, Zhang Ting, Dong Peng. Science and Technology Wind, 2015(12), 120(in Chinese).
雷登辉, 张婷, 董鹏. 科技风, 2015(12), 120.
19 Zhu Xiujie, Zheng Jian, Xiong Chao, et al. Journal of Composite Materials, 2022, 39(1), 399(in Chinese).
朱秀杰, 郑坚, 熊超, 等. 复合材料学报, 2022, 39(1), 399.
20 Li Zhuangfei, KouZiqi, Liu Hai, et al. Journal of Qingdao University of Technology, 2021, 42(3), 28(in Chinese).
李壮飞, 寇子琦, 刘海, 等. 青岛理工大学学报, 2021, 42(3), 28.
21 Ugural A C. Fan Qinshan Translation. Plate and shell stress, China Building and Architecture Press, China, 1986, pp. 10(in Chinese).
Ugural A C, 范钦珊译. 板壳应力, 中国建筑工业出版社, 1986, pp. 10.
22 Kang Renke. Diamond and Abrasives Engineering, 2020, 40(4), 1(in Chinese).
康仁科. 金刚石与磨料磨具工程, 2020, 40(4), 1.
23 Zhao Qi. Study on scratch removal and cleaning technology of CMP machining surface of monocrystalline silicon components. Master's Thesis, Harbin industrial university, China, 2022(in Chinese).
赵琦. 单晶硅元件CMP加工表面划痕去除和清洗工艺研究. 硕士学位论文, 哈尔滨工业大学, 2022.
24 Mi Haizhen, Hu Yanni, Li Chunyan. Elastic Mechanics, Chongqing University Press, China, 2001(in Chinese).
米海珍, 胡燕妮, 李春燕. 弹性力学, 重庆大学出版社, 2001.
25 Huang Xiaoqing, Lu Lifang, He Tinghui. Mechanics of materials, South China University of Technology Press, China, 2011(in Chinese).
黄小清, 陆丽芳, 何庭蕙. 材料力学, 华南理工大学出版社, 2011.