| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Current Status of Research on Contact Fatigue Life and Influencing Factors of Solid Lubrication Gears |
| HE Tao1,2, MA Guozheng2,*, LI Haiqing1,*, SHI Jiadong3, LI Zhen4, GUO Weiling2, XING Zhiguo2
|
1 School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China
2 Key Laboratory of National Defense Science and Technology for Equipment Remanufacturing, Army Academy of Armored Forces, Beijing 100072, China
3 School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China
4 State Key Laboratory of Mechanical Systems and Vibration, Shanghai Jiaotong University, Shanghai 200240, China |
|
|
|
|
Abstract As an important component in the field of transmission, the service life of gears has received wide attention. In the gear operation process, the contact tooth surface is subject to mutual rolling action and mutual sliding action, easy to produce tooth contact fatigue failure. Solid lubrication gear refers to the gear tooth surface coated with a layer of solid lubrication coating gear, the coating can effectively reduce the friction and wear of the gear meshing surface and improve its load-bearing capacity, and ultimately realize the purpose of extending the contact fatigue life of the gear. This paper mainly summarizes the current research status of solid lubrication gear contact fatigue life at home and abroad. First of all, the contact fatigue test research on solid lubricated gears is summarized, including the development of various types of gear testing machines, the typical contact fatigue failure forms of various solid lubricated gears, as well as the relevant life calculation models and test methods proposed and so on. Then, from the perspective of contact mechanics and tribology between gear meshing surfaces, and considering the characteristics of solid lubrication coatings, various types of life calculation models based on numerical calculations and finite element analysis are outlined. Then, the influence of three main factors, namely, surface physical properties, service conditions and solid lubrication materials, on the contact fatigue behavior of solid lubricated gears is explored and analyzed. Finally, this paper summarizes and looks forward to the future research direction of contact fatigue life of solid lubricated gears.
|
|
Published: 10 January 2025
Online: 2025-01-10
|
|
|
|
|
1 Liu H J, Liu H L, Zhu C C, et al. Coatings, 2019, 9(1), 42.
2 Han J H, Kim C G. Composite Structures, 2006, 72(2), 218.
3 Ma G Z, Xu B S, Wang H D, et al. Materials Bulletins, 2010, 24(1), 68 (in Chinese).
马国政, 徐滨士, 王海斗, 等. 材料导报, 2010, 24(1), 68.
4 Wang C, Wang S R, Wang G Q, et al. Measurement, 2018, 119, 97.
5 Li W, Deng S, Liu B S. Engineering Failure Analysis, 2020, 107, 104225.
6 Liu H J, Zhang B Y, Zhu C Z, et al. Journal of Mechanical Engineering, 2022, 58(3), 95 (in Chinese).
刘怀举, 张博宇, 朱才朝, 等. 机械工程学报, 2022, 58(3), 95.
7 Brandão J A, Martins R, Seabra J H O, et al. Wear, 2015, 324-325, 64.
8 Cheng Y J, Wang Y S, Lin J H, et al. International Journal of Advanced Manufacturing Technology, 2023, 125(7-8), 2897.
9 Li W, Liu B S. International Journal of Fatigue, 2018, 106, 103.
10 Zou C S, Cui H T, Sun G Q. Lubricating Oil, 2013, 28(1), 42 (in Chinese).
邹晨生, 崔海涛, 孙国强. 润滑油, 2013, 28(1), 42.
11 Bao H Y, Jin G H, Lu F X. Journal of Mechanical Science and Technology, 2020, 34(12), 4951.
12 Zhang J P, Pei M G, Mi L P, et al. Petroleum Processing and Petroche-micals, 2012, 43(10), 82 (in Chinese).
张继平, 裴明刚, 糜莉萍, 等. 石油炼制与化工, 2012, 43(10), 82.
13 Li X G, Zhang S X, Ding X F, et al. Lubricating Oil, 2023, 38(2), 14 (in Chinese).
李小刚, 张随心, 丁芳玲, 等. 润滑油, 2023, 38(2), 14.
14 Li X M, Rong Y M. Mechanical Research & Application, 2011, 24(6), 45 (in Chinese).
李喜梅, 容一鸣. 机械研究与应用, 2011, 24(6), 45.
15 Wang X Y, Zhao H, Huang K, et al. Machinery & Electronics, 2010, 12, 10 (in Chinese).
王雪瑶, 赵韩, 黄康, 等. 机械与电子, 2010, 12, 10.
16 He H B, Li H Y, Xu Z Z, et al. International Journal of Precision Engineering and Manufacturing, 2010, 11(6), 937.
17 苟世宁, 郝宏, 曹珍, 等. 中国专利, CN104316321B, 2017.
18 Yuan Z H. Experimental study on the bearing capacity of the small modulus gear transmission with solid lubrication in space. Master's Thesis, Harbin Institute of Technology, China, 2015 (in Chinese).
原祖浩. 空间固体润滑小模数齿轮传动承载能力试验研究. 硕士学位论文, 哈尔滨工业大学, 2015.
19 Li J. Design and analysis on the key components of high-speed gear fatigue test bench. Master's Thesis, Chongqing University, China, 2020 (in Chinese).
李杰. 高速齿轮疲劳试验台关键部件设计及分析. 硕士学位论文, 重庆大学, 2020.
20 Schwarz A, Ebner M, Lohner T. Industrial Lubrication and Tribology, 2021, 73(3), 457.
21 Shi Z Y, Wang W, Yu B, et al. Journal of Mechanical Transmission, 2021, 45(12), 130 (in Chinese).
石照耀, 王伟, 于渤, 等. 机械传动, 2021, 45(12), 130.
22 陈奇, 张龙唱, 庆振华, 等. 中国专利, CN114459753B, 2022.
23 王海霞, 张磊, 邹武, 等. 中国专利, CN104807633A, 2015.
24 Wang J, Wan Z H, Dong Z R, et al. Machines, 2021, 9(1), 1.
25 Kawalec A, Wiktor J, Ceglarek D. Journal of Mechanical Design, 2006, 128(5), 1141.
26 Khan M A, Cooper D, Starr A. Strain, 2009, 45(4), 358.
27 Zhao L, Frazer R C, Shaw B. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2016, 230(7-8), 1350
28 Li J B, Wang S L, Yang J J, et al. Applied Sciences. 2023, 13(5), 3291.
29 Dong W B, Nejad A R, Moan T, et al. Journal of Loss Prevention in the Process Industries, 2022, 65, 104115.
30 Morales-Espejel G E, Rycerz P, Kadiric A. Wear, 2018, 398, 99.
31 Zhao L, Shao Y, Du M, et al. Coatings. 2020, 10(12), 1224.
32 Wang X P, Liu S J. Journal of Mechanical Engineering, 2021, 57(1), 68.
33 Erricehllo R. Gear Technology, 2016, 2, 10.
34 Boiadjie I, Witzig J, Tobie T, et al. In:International Gear Conference. Lyon, 2014, pp. 670.
35 Behvar A, Tahmasbi K, Savich W, et al. Engineering Failure Analysis, 2024, 156, 107829.
36 Lyu S K, Inour K, Deng G, et al. Ksme International Journal, 1998, 12(2), 206.
37 Lewicki D G, Handschuh R F, Heath G F, et al. Journal of the American Helicopter Society, 2000, 45(2), 118.
38 Cavallaro G P, Wilks T P, Subramanian C, et al. Surface & Coatings Technology, 1995, 71(2), 182.
39 Zhang L N, Xiang Y, Ding J T. Mechanical Research and Applications, 2021, 34(3), 199 (in Chinese).
张丽娜, 相涯, 丁金涛. 机械研究与应用, 2021, 34(3), 199.
40 Qin X P, Li J B, Xu H W. Mechanical Transmission, 2000(3), 24 (in Chinese).
秦旭平, 李进宝, 许恒伟. 机械传动, 2000(3), 24.
41 Jia C F, Zhu C Z, Liu H J, et al. Journal of Mechanical Transmission, 2022, 46(12), 86 (in Chinese).
贾晨帆, 朱才朝, 刘怀举, 等. 机械传动, 2022, 46(12), 86.
42 Zhang X, Wei P, Parker R G, et al. International Journal of Fatigue, 2022, 165, 107203.
43 Li T Y, Wu Z F, Wang T, et al. Science Technology and Engineering, 2017, 17(28), 207 (in Chinese).
李添翼, 武志斐, 王铁, 等. 科学技术与工程, 2017, 17(28), 207.
44 Weibull W. Royal Swedish Institute of Engineering Research, 1939, 151, 1.
45 Tichy J A, Meyer D M. International Journal of Solids and Structures, 2000, 37(1), 391.
46 Paris P C, Tada H, Donald J K. International Journal of Fatigue, 1999, 21, 35.
47 Pao Y H. Chinese Journal of Mechanics-Series A, 2000, 16(2), 53.
48 Zang L B, Chen Y, Hou W J, et al. Tribology International, 2023, 186, 108622.
49 Olmi G, Comandini M, Freddi A. Strain, 2010, 46(4), 382.
50 Li Y, Xiao W, Huang H Y, et al. In:proceedings of the International Conference on Engineering Design and Optimization (ICEDO 2010). Ningbo Univ, Ningo, 2011.
51 Nadaraja S, Kot S. Journal of Mechanical Science and Technology, 2008, 22(7), 1247.
52 Yu J, Shen G X, Jia Y Z. Modern Manufacturing Engineering, 2007(5), 18 (in Chinese).
于捷, 申桂香, 贾亚洲. 现代制造工程, 2007(5), 18.
53 Zhang H M. Mechanical Management and Development, 2009, 24(3), 59 (in Chinese).
张慧敏. 机械管理开发, 2009, 24(3), 59.
54 Liu H J, Mao K, Zhu C C, et al. Journal of Tribology-Transactions of the Asme, 2012, 134(2), 021510.
55 Li S. Tribology International, 2015, 88, 170.
56 Li S, Kahraman A. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 2011, 225(J8), 740.
57 Evans H P, Snidle R W, Sharif K J, et al. Journal of Tribology-Transactions of the Asme, 2013, 135(1), 011510.
58 Wang Z J, Yu C J, Wang Q. Journal of Tribology-Transactions of the Asme, 2015, 137(1), 011501.
59 Wang Z J, Wang W Z, Wang H, et al. Tribology Letters, 2009, 35(3), 229.
60 Borgaonkar A V, Syed I. Sadhana-Academy Proceedings in Engineering Sciences, 2020, 45(1), 30.
61 Baragetti S, Cavalleri S, Tordini F. Key Engineering Materials, 2010, 452-453, 589.
62 Baragetti S. Periodica Polytechnica Mechanical Engineering, 2022, 66(4), 304.
63 Baragetti S, Cavalleri S, Tordini F. Procedia Engineering, 2011, 10, 1485.
64 Abdul-Baqi A, Schreurs P J G, Geers M G D. International Journal of Solids and Structures, 2005, 42(3-4), 927.
65 Feng J L, Qin Y. In:Proceedings of the 2nd International Conference on Mechanics and Control Engineering. Beijing, China, 2014, pp, 491.
66 Ben-Zion Y, Dahmen K A, Uhl J T. Pure and Applied Geophysics, 2011, 168(12), 2221.
67 Yin D Q, Peng X H, Qin, Y, et al. Applied Surface Science, 2011, 258(4), 1451.
68 Feng J, Qin Y, Dong H S. In:Proceedings of the 4th International Conference on New Forming Technology. Glasgow, 2015, pp, 12005.
69 Diao D F, Kandori A. Tribology International, 2006, 39(9), 849.
70 Zhang J J, Dong M Y, Hu Y M, et al. Advanced Composites and Hybrid Materials, 2022, 5(4), 3117.
71 Peiran Y, Wen S Z. Journal of Tribology, 1990, 112(4), 631.
72 Liu H J, Mao K, Zhu C C, et al. Tribology Transactions, 2013, 56(1), 41.
73 Liu H J, Liu H L, Zhu C C, et al. Friction, 2019, 7(2), 117.
74 Liu H J, Zhu C C, Zhang Y Y, et al. Tribology International, 2016, 99, 117.
75 Liu H J, Zhu C C, Wang Z J, et al. Journal of Tribology-Transactions of the Asme, 2017, 139(3), 031503.
76 Sánchez-Sesma F J, Madariaga R, Irikura K. Geophysical Journal International, 2001, 146(1), 237.
77 Chiu C C, Liou Y. Thin Solid Films, 1995, 268(1-2), 91.
78 Diao D F, Sawaki Y, Suzuki H. Surface & Coatings Technology, 1996, 86-7(1-3), 480.
79 Liu H J, Zhu C C, Wang Z J, et al. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 2018, 232(3), 277.
80 Liu Y M, Mahadevan S. International Journal of Fatigue, 2005, 27(7), 790.
81 Karolczuk A, Macha E. International Journal of Fracture, 2005, 134(3-4), 267.
82 Kondratiev A V, Gaidachuk V E, Kharchenko M E. Mechanics of Composite Materials, 2019, 55(2), 259.
83 Liu Y M, Mahadevan S. International Journal of Fatigue, 2007, 29(2), 347.
84 Li S, Kahraman A, Klein M. Journal of Mechanical Design, 2012, 134(4), 041007.
85 Zhou Y, Zhu C C, Liu H J, et al. Industrial Lubrication and Tribology, 2018, 70(1), 23.
86 Song E P, Lu H, He G, et al. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(5), 906 (in Chinese).
宋恩鹏, 陆华, 何刚, 等. 北京航空航天大学学报, 2016, 42(5), 906.
87 Zhang B Y, Liu H J, Bai H Y, et al. Wear, 2019, 428, 137.
88 Xiao Y Y, Zou M J, Shi W K, et al. Coatings, 2019, 9(10), 642.
89 Rezaei S, Wulfinghoff S, Reese S. International Journal of Solids and Structures, 2017, 121, 62.
90 Li X N, Liang L H, Xie J J, et al. Surface & Coatings Technology, 2014, 258, 1039.
91 Bae S M, Seo K J, Kim D E. Friction, 2020, 8(6), 1169.
92 Laderou A, Mohammadpou M, Theodossiade S, et al. Applied Sciences-Basel, 2020, 10(9), 3102.
93 De La Cruz M, Chong W W F, Teodorescu M, et al. Tribology International, 2012, 49, 17.
94 Wang J G, Tan J R. Journal of Tribology-Transactions of the Asme, 1997, 119(4), 869.
95 Bobzin K, Broegemannl T, Stahl K, et al. Wear, 2015, 328, 217.
96 Humphrey E, Morris N J, Rahmani R, et al. Tribology International, 2020, 149, 642.
97 Pei J X, Han X, Tao Y R, et al. Tribology International, 2021, 153, 106606.
98 Li J K, Chen Y, Zang L B, et al. Journal of Mechanical Transmission, 2021, 45(12), 1(in Chinese).
李金锴, 陈勇, 臧立彬, 等. 机械传动, 2021, 45(12), 1.
99 Yang Y, Wang J X, Zhou Q H. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 2020, 234(5), 649.
100 Qiao H, Evans H P, Snidle R W. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 2008, 222(3), 381.
101 Jia J P, Zang L B, Chen Y, et al. Chinese Journal of Engineering Design, 2023, 30(1), 48 (in Chinese).
贾纪鹏, 臧立彬, 陈勇, 等. 工程设计学报, 2023, 30(1), 48.
102 Bošanský M, Gondár E, Švec P, et al. Lubricants, 2020, 8(5), 56.
103 Bhosale D G, Rathod W S, Rukhande S W. Materials Today, Procee-dings, 2019, 19, 339.
104 Bobzin K, Kalscheuer C, Thiex M, et al. Tribology International, 2022, 174, 107761.
105 Li Y T, Xie M L, Sun Q, et al. Surface and Coatings Technology, 2019, 378, 125081.
106 Yang Y S, Fan X Q, Yue Z F, et al. Applied Surface Science, 2022, 598, 153845.
107 Tuszynski W, Michalczewski R, Osuch-Slomka E, et al. Materials, 2021, 14(22), 7082.
108 Moorthy V, Shaw B A. Wear, 2012, 276, 130.
109 Moorthy V, Shaw B A. Wear, 2013, 297, 878.
110 Singh H, Ramirez G, Eryilmaz O, et al. Tribology International, 2016, 98, 172.
111 Benedetti M, Fontanari V, Torresani, E, et al. Wear, 2017, 378, 106.
112 Martins R, Amaro R, Seabra J. Tribology International, 2008, 41(4), 234.
113 Shi S S, Wu H P, Song Y T, et al. Industrial Lubrication and Tribology, 2018, 70(1), 155.
114 Wang X, Zhang Z H, Men Y Z, et al. Optics and Laser Technology, 2020, 126, 106136.
115 Mutyala K C, Doll G L, Wen J, et al. Applied Physics Letters, 2019, 115(10), 103103.
116 Shi J D, Han C H, Liu Q. Surface Technology, 2020, 49(8), 81 (in Chinese).
石佳东, 韩翠红, 刘倩, 等. 表面技术, 2020, 49(8), 81. |
| No related articles found! |
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2025, Vol. 39 
