TA24合金多道次热变形行为及管材制备仿真

doi:10.11896/cldb.23120078

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9296KB)
Export: BibTeX | EndNote (RIS)

Abstract To study the high-temperature deformation behavior and the PQF (Premium quality finishing) hot rolling preparation process of TA24 alloy, the multi-pass thermal compression experiment of TA24 alloy was carried out by Gleeble-3500 thermal simulator. The strain compensation constitutive model of TA24 titanium alloy was constructed by Arrhenius hyperbolic function, and the variation of microstructure of TA24 alloy with strain rate and deformation temperature was analyzed. The changes of strain field, temperature field and rolling force during PQF hot rolling were studied by finite element simulation. The results show that the flow stress of TA24 alloy is inversely proportional to the deformation temperature and proportional to the strain rate during multi-pass deformation. With the increase of deformation temperature, TA24 alloy transforms from (α+β) phase to β phase, and the flow stress decreases accordingly. When deformed at 950 ℃, the change of strain rate has little effect on the microstructure, which is elongated Widmannstetter structure. The results of finite element analysis show that when the titanium tube passes through the odd frame, the maximum strain appears at the position of 0°, the minimum strain appears at the position of 60°, while the result of even number of frames is opposite. The radial displacement of the titanium tube at 0° position and 30° position decreases when passing through the odd frame, and increases when passing through the even frame, while the radial displacement at 60° position shows the opposite trend. In addition, the rolling metal flows from the bottom of the pass to the roll gap during the rolling process, and the overall rolling force is 170—700 kN.

Key words： TA24 titanium alloy hot deformation behavior PQF finite element

Published: 25 January 2025 Online: 2025-01-21

CLC number:

TG335.7

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Chong
	YAN Yangyang
	YANG Zhenyu
	SONG Dejun
	HU Weimin
	YANG Shengli
	TIAN Shiwei
	JIANG Haitao

Cite this article:

LI Chong,YAN Yangyang,YANG Zhenyu, et al. Multi-pass Hot Deformation Behavior and Tube Preparation Simulation of TA24 Alloy[J]. Materials Reports, 2025, 39(2): 23120078-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.23120078 OR https://www.mater-rep.com/EN/Y2025/V39/I2/23120078

1 Guo K X.Heat Treatment, 2023, 38(5), 8 (in Chinese).
郭克星.热处理, 2023, 38(5), 8.
2 Li Y H, Zhang W X, Chen X L, et al.Titanium Industry Progress, 2022, 39(1), 43 (in Chinese).
李永华, 张文旭, 陈小龙, 等.钛工业进展, 2022, 39(1), 43.
3 Zhao Y H, Chang H, Li Z J, et al.Titanium Industry Progress, 2003(6), 12 (in Chinese).
赵永庆, 常辉, 李佐臣, 等.钛工业进展, 2003(6), 12.
4 Tao H, Song D J, Xu F F, et al. 2020, 35(5), 7 (in Chinese).
陶欢, 宋德军, 许飞凡, 等.材料开发与应用, 2020, 35(5), 7.
5 Yin Y C, Liu J, Zhang S F, et al.Titanium Industry Progress, 2023, 40(1), 21 (in Chinese).
尹艳超, 刘甲, 张帅锋, 等.钛工业进展, 2023, 40(1), 21.
6 Zhang H R, Niu H Z, Zang M C, et al.Materials Science and Engineering: A, 2021, 825,141902.
7 Guo K, Meng K, Miao D, et al.Materials Science and Engineering, 2019, 766, 138346.
8 Shi J X, Yu W, Dong E T.Journal of Chongqing University, 2019, 42(6), 42 (in Chinese).
史佳新, 余伟, 董恩涛.重庆大学学报, 2019, 42(6), 42.
9 Chen C, Shuang Y H, Chen J X, et al. 2023, 52(3), 959 (in Chinese).
陈晨, 双远华, 陈建勋, 等.稀有金属材料与工程, 2023, 52(3), 959.
10 Singh A K, Kumar A, Narasimhan K, et al.Journal of Materials Processing Technology, 2021, 292, 117060.
11 Zhou D D, Zeng W D, Xu J W.Rare Metal Materials and Engineering, 2020, 49(3), 1045 (in Chinese).
周大地, 曾卫东, 徐建伟.稀有金属材料与工程, 2020, 49(3), 1045.
12 Sellars C M, Tegart W J.Intemational Metallurgieal Reviews, 1972(17), 1.
13 Zener C, Hollomon J H. Journal of Applied Physics, 1944, 15(1), 22.
14. Zang M C, Niu H Z, Yu J S, et al.Materials Science and Engineering: A, 2022, 840,142952.
15. Bhattacharyya D, Viswanathan G B, Denkenberger R, et al.Acta Materialia, 2003, 51(16), 4679.
16. Kang L, Zheng J, Xian B, et al.Journal of Physics: Conference Series, 2023, 2483(1), 012051.
17. Su Y. Hot deformation behavior of short-term servicing high-temperature titanium alloy DSTi700 and microstructure and properties of the alloy sheet.Ph.D.Thesis, Harbin Institute of Technology, China, 2021 (in Chinese).
苏宇. DSTi700短时用高温钛合金热变形行为及其板材组织性能.博士学位论文,哈尔滨工业大学, 2021.
18. Fan L S, Deng L S, Wang H S.Steel Pipe, 2022, 51(4), 69 (in Chinese).
范立生, 邓文军, 王华山.钢管, 2022, 51(4), 69.
19. Xu Z X. Finite element simulation and parametric modeling of three-roll retained mandrel continuous rolling process.Master's Thesis, Northeastern University, China, 2019 (in Chinese).
徐志祥. 三辊限动芯棒连轧过程有限元模拟及参数化建模.硕士学位论文,东北大学, 2019.