贝氏体钢轨磨损与接触疲劳行为的研究进展

doi:10.11896/cldb.23090020

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (37825KB)
Export: BibTeX | EndNote (RIS)

Abstract Rail wear and rolling contact fatigue, a main damage form during wheel-rail contact, has a vital impact on railway track safety and maintenance.With the increase of axle load of trains, the fatigue damage of bainite rail is becoming increasingly prominent, which seriously endangers the driving safety.This summary reviewed the research progress of wear and fatigue damage of bainite rail at home and abroad in recent years, the wear and rolling contact fatigue properties of bainite rail and the competitive relationship between them are described, and the test results are compared with those of pearlitic rail, the effects of different factors (microstructure, service conditions, environmental media) on the wear and rolling contact fatigue properties of bainite rail are summarized.The key research directions in the future are proposed as follows:The preparation of stable residual austenite structure based on chemical composition regulation and heat treatment process parameter optimization.Study on the applicability of bainite rail under different service conditions.Study on the performance of bainite rail in corrosive, high and low temperature environment.

Key words： bainitic rail wear rolling contact fatigue influence factor

Published: 10 January 2025 Online: 2025-01-10

CLC number:

TB31

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	QI Shunshun
	WANG Wenjian
	WANG Yuan
	DING Haohao

Cite this article:

QI Shunshun,WANG Wenjian,WANG Yuan, et al. Research Progress on Wear and Contact Fatigue Behavior of Bainitic Rail[J]. Materials Reports, 2025, 39(1): 23090020-11.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.23090020 OR https://www.mater-rep.com/EN/Y2025/V39/I1/23090020

1 Xu X, Wang Z Y, Zhang X, et al. International Journal of Fatigue, 2022, 161, 106922.
2 Xu X, Wang Z, Gao G H, et al. International Journal of Fatigue, 2022, 160, 106872.
3 Zhang T Y, Wang Y, Zhang C, et al. International Journal of Fatigue, 2023, 172, 107641.
4 Zhang R J, Zheng C L, Lyu B, et al. Engineering Failure Analysis, 2022, 137, 106875.
5 Trummer G, Marte C, Dietmaier P, et al. Wear, 2016, 352, 136.
6 Ding H H, Yang J Y, Wang W J, et al. Journal of Manufacturing Processes, 2022, 73, 544.
7 Zeng D F, Lu L T, Gong Y H, et al. Materials & Design, 2016, 92, 998.
8 Hu Y, Guo L C, Maiorino M, et al. Wear, 2020, 460, 203455.
9 Xiong S B. Research on microstructure and properties of new heavy rail bainitic steel. Master's Thesis, Xihua University, China, 2016 (in Chinese).
熊师兵. 重载铁路用新型贝氏体钢组织性能研究. 硕士学位论文, 西华大学, 2016.
10 Jimbo S, Nambu S. Crystals, 2023, 13(3), 414.
11 Chen J M, Li X F, Wang G, et al. PTCA. (Part A:Phys. Test), 2022, 58(11), 6 (in Chinese).
陈洁明, 李雪峰, 王刚, 等. 理化检验-物理分册, 2022, 58(11), 6.
12 Zheng C L, Zhang F C, Lv B, et al. Journal of Mechanical Engineering, 2018, 54(4), 176 (in Chinese).
郑春雷, 张福成, 吕博, 等. 机械工程学报, 2018, 54(4), 176.
13 Gui X L, Wang K, Su H, et al. Materials Reports, 2020, 34(22), 22136 (in Chinese).
桂晓露, 王琨, 苏浩, 等. 材料导报, 2020, 34(22), 22136.
14 Cheng X, Gui X L, Gao G H. Materials Reports, 2023, 37(7), 120 (in Chinese).
程瑄, 桂晓露, 高古辉. 材料导报, 2023, 37(7), 120.
15 Lesage T, Avettand-Fènoël M N, Balloy D, et al. Materials Today Communications, 2022, 31, 103259.
16 Garcia-Mateo C, Caballero F G, Chao J, et al. Journal of Materials Science, 2009, 44, 4617.
17 Al-Juboori A, Zhu H T, Li H J, et al. Engineering Failure Analysis, 2023, 107411.
18 Lv J, Yang Q Q, Zou D Q, et al. Railway Engineering, 2020, 60(1), 120 (in Chinese).
吕晶, 杨其全, 邹定强, 等. 铁道建筑, 2020, 60(1), 120.
19 Wang K K, Microstructure and Mechanical Properties Optimization of Bainitic Rail Steels. Ph. D. Thesis, Beijing Jiaotong University, China, 2017 (in Chinese).
王凯凯. 贝氏体钢轨钢组织调控与性能优化. 博士学位论文, 北京交通大学, 2017.
20 Ordóñez Olivares R, Garcia C I, DeArdo A, et al. Wear, 2011, 271(1-2), 364.
21 Gui X L, Wang K K, Gao G H, et al. Materials Science and Engineering:A, 2016, 657, 82.
22 Wang B S, Research on preparative technique and characteristics of new bainitic steel for heavy rail. Master's Thesis, Hebei University of Technology, China, 2020 (in Chinese).
王宝帅. 重载轨道用新型贝氏体钢的制备及性能研究. 硕士学位论文, 河北工业大学, 2017.
23 Caballero F G, Bhadeshia H K D H, Mawella K J A, et al. Materials Science and Technology, 2013, 17(5), 512.
24 Caballero F G, Bhadeshia H K D H, Mawella K J A, et al. Materials Science and Technology, 2013, 17(5), 517.
25 Clayton P, Sawley K J, Bolton P J, et al. Wear, 1987, 120(2), 199.
26 Yokoyama H, Mitao S, Yamamoto S, et al. NKK Technical Report-Japanese Edition, 2000, 84, 17.
27 Pacyna J. Journal of Achievements in Materials and Manufacturing Engineering, 2008, 28(1), 19.
28 Sawley K, Kristan J. Fatigue & Fracture of Engineering Materials & Structures. 2003, 26(10), 1019.
29 Chen Z Y, Zhou Q Y, Zhang Y H, et al, Journal of the China Railway Society, 2013, 35(8), 75 (in Chinese).
陈朝阳, 周清跃, 张银花, 等. 铁道学报, 2013, 35(8), 75.
30 Tan Z L, Gao B, Gao G H, et al. Heat Treatment of Metals, 2018, 43(4), 10 (in Chinese).
谭谆礼, 高博, 高古辉, 等. 金属热处理, 2018, 43(4), 10.
31 Gao G H, Gui X L, Tan Z L, et. al. Materials Reports, 2017, 31, 74 (in Chinese).
高古辉, 桂晓露, 谭谆礼, 等. 材料导报, 2017, 31, 74.
32 Zou D Q, Yang Q Q, Lu G J, et al. Rail failure analysis and damage map, China Railway Publishing House, 2010, pp. 50 (in Chinese).
邹定强, 杨其全, 卢观健, 等. 钢轨失效分析和伤损图谱, 中国铁道出版社, 2010, pp. 50.
33 Liu Q Y, Zhang B, Zhou Z R. China Mechanical Engineering, 2002(18), 72 (in Chinese).
刘启跃, 张波, 周仲荣. 中国机械工程, 2002(18), 72.
34 Hu Y. Study on wear and damage behavior and optimal selection of wheel and rail under various material/hardness matching conditions. Ph.D. thesis, Southwest Jiaotong University, China, 2021 (in Chinese).
胡月. 不同材料/硬度匹配条件下轮轨磨损与损伤行为及优化选用研究. 博士学位论文, 西南交通大学, 2021.
35 Liu J H. Experimental research on rolling wear and contact fatigue damage behaviors of wheel/rail materials. Ph. D. Thesis, Southwest Jiaotong University, China, 2016 (in Chinese).
刘吉华. 轮轨材料滚动磨损和接触疲劳损伤行为的试验研究. 博士学位论文, 西南交通大学, 2016.
36 Huang Z W. Sichuan Building Materials, 2015, 41(5), 144 (in Chinese).
黄正玮. 四川建材, 2015, 41(5), 144.
37 Jiang S C. Harbin Railway Technology, 2010(3), 40 (in Chinese).
姜绍春. 哈尔滨铁道科技, 2010(3), 40.
38 Su H. Research on wear resistance of bainite rails for heavy haul railway. Master's Thesis, Beijing Jiaotong University, China, 2020 (in Chinese).
苏浩. 重载铁路用贝氏体钢轨耐磨性能研究. 硕士学位论文, 北京交通大学, 2020.
39 Zapata D, Jaramillo J, Toro A. Wear, 2011, 271, 393.
40 Lee K M, Polycarpou A A. Wear, 2005, 259, 391.
41 Liu J P, Li Y Q, Zhou Q Y, et al. Wear. 2019, 432, 202943.
42 Hasan S M, Chakrabarti D, Singh S B. Wear, 2018, 408, 151.
43 Viáfara C C, Castro M I, Vélez J M, et al. Wear, 2005, 259, 405.
44 Garnham J, Beynon J H. Wear, 1992, 157(1), 81.
45 Hardwick C, Lewis R, Stock R. Wear, 2017, 384, 50.
46 Liu Y. Theoretical and Experimental Study on Characteristic of Wheel-rail Contact and Damage Factors of Rail. Ph. D. Thesis, Lanzhou Jiaotong University, China, 2016 (in Chinese).
刘洋. 轮轨接触特性及钢轨损伤因素的理论及试验研究. 博士学位论文, 兰州交通大学, 2016.
47 Aglan H A, Fateh M. International Journal of Damage Mechanics, 2006, 15, 393.
48 Aglan H, Fateh M. Journal of Mechanics of Materials and Structures, 2007, 2, 335.
49 Królicka A, Lesiuk G, Radwański K, et al. International Journal of Fatigue, 2021, 149, 106280.
50 Onal O, Canadinc D, Sehitoglu H, et al. Fatigue & Fracture of Engineering Materials & Structures, 2012, 35, 985.
51 Girsch G, Heyder R. In:7th World Congress on Railway Research (WCRR2006). Montreal, Canada, 2006.
52 Su X, Clayton P. Wear, 1996, 197, 137.
53 Seo J W, Jun H K, Kwon S J, et al. International Journal of Fatigue, 2016, 83, 184.
54 Zhong W. Experimental investigation of rail damnification mechanism. Ph. D. thesis, Southwest Jiaotong University, China, 2011 (in Chinese).
钟雯. 钢轨的损伤机理研究. 博士学位论文, 西南交通大学, 2011.
55 Aquib Anis M, Srivastava J P, Duhan N R, et al. IOP Conference Series:Materials Science and Engineering, 2018, 377(1), 012098.
56 Kapoor A, Fletcher D I, Franklin F J. Tribology Series, 2003, 41, 331.
57 Zhong W, Dong L, Wang Y, et al. Tribology, 2012, 32(1), 96 (in Chinese).
钟雯, 董霖, 王宇, 等. 摩擦学学报, 2012, 32(1), 96.
58 Zhang F C, Zheng C L, Lv B, et al. Engineering Failure Analysis, 2009, 16(5), 1461.
59 Wang H H, Wang W J, Han Z Y, et al. Wear, 2023, 522, 204721.
60 Zhang R J, Zheng C L, Chen C, et al. Wear, 2021, 482, 203978.
61 Fan Y S, Gui X L, Liu M, et al. Wear, 2022, 508, 204474.
62 Xing L X, Zou D Q, Du H Q. Railway Technological Innovation, 2016(2), 71 (in Chinese).
邢丽贤, 邹定强, 杜涵秋. 铁路技术创新, 2016(2), 71.
63 Chen X. China Metallurgy, 2012, 22(7), 28 (in Chinese).
陈雄. 中国冶金, 2012, 22(7), 28.
64 Yuan J, Deng J H, Gao H, et al. Iron Steel Vanadium Titanium, 2015, 36(1), 77 (in Chinese).
袁俊, 邓建辉, 高洪, 等. 钢铁钒钛, 2015, 36(1), 77.
65 Gao G H, Chen Q R, Guo R H, et al. Materials Reports, 2017, 31(20), 48 (in Chinese).
高古辉, 陈倩如, 郭浩冉, 等. 材料导报, 2017, 31(20), 48.
66 Goulas C, Mecozzi M G, Sietsma J. Metallurgical and Materials Transactions A. 2016, 47, 3077.
67 Gao B, Tan Z L, Liu Z N, et al. Engineering Failure Analysis, 2019, 100, 485.
68 Zhang R J, Zheng C L, Lv B, et al. International Journal of Fatigue, 2022, 159, 106795.
69 Zhu M, Xu G, Zhou M X, et al. Metals, 2018, 8(7), 484.
70 Wang K K, Tan Z L, Gao G H, et al. Materials Science and Enginee-ring:A, 2016, 662, 162.
71 Raudensky M, Horsky J, Hnizdil M P, et al. AIP Conference Procee-dings, American Institute of Physics, 2011, 11315(1), 563.
72 Gao G H, Liu R, Wang K, et al. Scripta Materialia, 2020, 184, 12.
73 Singh U P, Roy B, Jha S, et al. Materials Science and Technology, 2013, 17, 33.
74 Green M R, Rainforth W M, Frolish M F, et al. Wear, 2007, 263(1-6), 756.
75 Zhang R J, Zheng C L, Zhang P J, et al. Journal of Mechanical Engineering, 2023, 12, 253 (in Chinese).
张瑞杰, 郑春雷, 张佩君, 等. 机械工程学报, 2023, 12, 253.
76 Han Q Y, Zhang R J, Zheng C L, et. al. Journal of Hebei University of Technology, 2021, 50(6), 13 (in Chinese).
韩青阳, 张瑞杰, 郑春雷, 等. 河北工业大学学报, 2021, 50(6), 13.
77 Liu J P, Li Y Q, Jin J Y, et al. Materials Today Communications, 2020, 25, 101531.
78 Ma D S, Chi H X, Yong Q L, et al. Iron and Steel, 2010, 45(6), 79 (in Chinese).
马党参, 迟宏宵, 雍岐龙, 等. 钢铁, 2010, 45(6), 79.
79 Cheng J Q, Kang M K. Transaction of Materials and Heat Treatment, 2003(3), 8 (in Chinese).
程巨强, 康沫狂. 金属热处理学报, 2003(3), 8.
80 Zhu B B, Meng L, Zeng X Y, et al. Journal of Materials Processing Technology, 2023, 313, 117886.
81 Li Y Q, Liu J P, Zhang Y H, et al. Railway Engineering, 2020, 60(5), 112 (in Chinese).
李英奇, 刘佳朋, 张银花, 等. 铁道建筑, 2020, 60(5), 112.
82 Galas R, Omasta M. In:The latest methods of construction design, Springer International Publishing, Czech Republic, 2016, pp. 133.
83 Messaadi M, Oomen M, Kumar A. Tribology International, 2019, 14, 105857.
84 Lian Q L, Deng G Y, Zhu H T, et al. Friction, 2020, 8, 1178.
85 Gao G H, Liu M, Gui X L, et al. Acta Materialia, 2023, 250, 118887.
86 Song H Y. Research on corrosion wear properties and mechanism of bainite wheel and rail steel. Master's Thesis, Beijing Jiaotong University, China, 2020 (in Chinese).
宋宏宇. 贝氏体轮轨钢腐蚀磨损性能及机理研究. 硕士学位论文, 北京交通大学, 2020.
87 Du H Y, Ji L H. Advanced Materials of High Speed Railway, 2022, 1(4), 61 (in Chinese).
杜宏瑀, 季连海. 高速铁路新材料, 2022, 1(4), 61.