吸波预浸料树脂及其复合材料的综合性能研究

doi:10.11896/cldb.23010035

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (13522KB)
Export: BibTeX | EndNote (RIS)

Abstract The carbonyl iron powder (CIP) and acetylene black (CB) were introduced into the medium temperature curing prepreg resin system as absorbent agents. The influence of the addition of absorbent agents on the properties of prepreg resin was determined by testing the rheological properties, gel time, curing characteristic temperature, and thermogravimetric properties of the prepreg resin. The results showed thatthe addition of CIP and CB absorbent particles had little effect on the gel time and curing characteristic temperature of prepreg resin, but great effect on the rheological properties of prepreg resin. In order to meet the requirements of process performance, the mass ratio of CIP and CB absorbent particles to resin should be controlled from 0 to 2.5, and the mass ratio of CB to resin should be controlled from 0 to 0.03. Compared with the single-layer structure absorbing composite material, the two-layer structure absorbing composite material had better absorbing performance. Considering its forming process performance and absorbing performance comprehensively, the material combination of C3C as the wave penetrating layer and Fe250C as the loss layer had the best comprehensive performance. And its maximum effective absorbing bandwidth is 3.85 GHz, the corresponding thickness of the wave penetrating layer and the loss layer are 0.9 mm and 1.5 mm. The minimum RL value is -35.46 dB, the corresponding thickness of the wave penetra-ting layer and the loss layer are 0.5 mm and 1.4 mm, respectively.

Key words： prepreg resin absorbing particle electromagnetic parameter structural absorbing composite

Published: 25 May 2024 Online: 2024-05-28

CLC number:

TQ322

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Zhichao
	NI Aiqing
	CHEN Junlei
	WANG Jihui

Cite this article:

WU Zhichao,NI Aiqing,CHEN Junlei, et al. Study on the Comprehensive Properties of Absorbing Prepreg Resin and Its Composite[J]. Materials Reports, 2024, 38(10): 23010035-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23010035 OR http://www.mater-rep.com/EN/Y2024/V38/I10/23010035

1 Hou T Q, Jia Z R, He S Q, et al. Journal of Colloid and Interface Science, 2021, 583, 321.
2 Li Q, Zhang Z, Qi L P, et al. Advanced Science, 2019, 6(8), 1801057.
3 Lv H L, Yang Z H, Pan H G, et al. Progress in Materials Science, 2022, 127, 100946.
4 Lv H L, Guo Y H, Yang Z H, et al. Journal of Materials Chemistry C, 2017, 5(3), 491.
5 Dong J, Zhou W C, Qing Y C, et al. Ceramics International, 2018, 44(12), 14007.
6 Liu J L, Zhang L M, Wu H J. Journal of Physics D-Applied Physics, 2021, 54(20), 203001.
7 Zhang M W, Qu G D, Peng M Y, et al. Materials Reports, 2021, 35(S1), 62 (in Chinese).
张明伟, 曲冠达, 庞梦瑶, 等. 材料导报, 2021, 35(S1), 62.
8 Zhao S X, Ma H, Shao T Q, et al. Ceramics International, 2021, 47(12), 17337.
9 Liu Y J, Yang Y F. Textile Research Journal, 2021, 91(17), 1986.
10 Chen W, Zheng X N, He X Y, et al. Polymer Testing, 2020, 86, 106448.
11 Luo F, Liu D Q, Cao T S, et al. Advanced Composites and Hybrid Materials, 2021, 4(3), 591.
12 Shin J H, Jang H K, Choi W H, et al. Journal of Applied Polymer Science, 2015, 132(22), 42019.
13 Xue J, Wu C, Du X, et al. Materials Research Express, 2020, 7(4), 045303.
14 Santhosi B, Ramji K, Rao N. Polymers & Polymer Composites, 2021, 29(5), 444.
15 Cai H S. Study on electromagnetic properties of fiber reinforced epoxy resin absorbent composites. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, 2019 (in Chinese).
蔡海硕. 纤维增强环氧树脂吸波复合材料的电磁性能研究. 硕士学位论文, 南京航空航天大学, 2019.
16 Zhang F F, Yu H, Zhang W T. Handbook for thermosetting resin matrix composite prepreg usage, China Building Materials Industry Press, China, 2019, pp. 6 (in Chinese).
张凤翻, 于华, 张雯婷. 热固性树脂基复合材料预浸料使用手册, 中国建材工业出版社, 2019, pp. 6.
17 Wu Z C, Wang J H, Ni A Q, et al. Polymer Materials Science & Engineering, 2022, 38(9), 95 (in Chinese).
邬志超, 王继辉, 倪爱清, 等. 高分子材料科学与工程, 2022, 38(9), 95.
18 Xie L P. Research on latent fest curing epoxy resin for prepreg. Master’s Thesis, North University of China, China, 2021 (in Chinese).
谢利鹏. 预浸料用潜伏性快速固化环氧树脂体系的研究. 硕士学位论文, 中北大学, 2021.
19 Lei P. Preparation of heat resistant epoxy resin for prepreg and research of its properties. Master’s Thesis, Wuhan University of Technology, China, 2016 (in Chinese).
雷攀. 预浸料用耐热环氧的制备与性能研究. 硕士学位论文, 武汉理工大学, 2016.
20 Tareen M H K, Hussain F, Zubair Z, et al. Journal of Composite Materials, 2022, 56(29), 4473.
21 Dou Y H, Zhang L, Gu H C. Journal of Functional Materials, 2007(1), 119 (in Chinese).
窦永华, 张玲, 古宏晨. 功能材料, 2007 (1), 119.
22 Huang Y Z, Huang Z Y, Guo Y, et al. Engineering Plastics Application, 2018, 46(9), 47 (in Chinese).
黄远征, 黄智勇, 郭一, 等. 工程塑料应用, 2018, 46(9), 47.
23 Zhao J. Study on analytical technology of bisphenol an epoxy resin system. Ph. D. Thesis, Qingdao University of Science & Technology, China, 2016 (in Chinese).
赵娟. 双酚A环氧树脂体系主要性能表征技术研究. 博士学位论文, 青岛科技大学, 2016.
24 Lee S H, Lee S G, Lee J S, et al. Polymers, 2022, 14(22), 4904.
25 Kitichatpayak D, Makcharoen W, Vittayakorn N, et al. Polymer-Plastics Technology and Materials, 2022, 61(16), 1826.
26 Lv H L, Guo Y H, Zhao Y, et al. Carbon, 2016, 110, 130.
27 Wang H Y, Zhu D M, Wang X F, et al. Composites Part A-Applied Science and Manufacturing, 2017, 93, 10.
28 Green M, Chen X B. Journal of Materiomics, 2019, 5(4), 503.
29 Lee W J, Baek S M, Joo Y S. Advanced Composite Materials, 2019, 28, 79.
30 Kong J, Gao H, Li Y, et al. Materials Reports, 2020, 34(9), 9055 (in Chinese).
孔静, 高鸿, 李岩, 等. 材料导报, 2020, 34(9), 9055.