基于金属骨架的复合材料混合结构拉伸性能与失效机理分析

doi:10.11896/cldb.21050214

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7251KB)
Export: BibTeX | EndNote (RIS)

Abstract Anew hybrid structure is designed which combines metal additive manufacturing, composite weaving and composite stitching processes. After the metal part and woven composite are fixed by normal stitching, the sample is finally formed by the co-curing process. This structure avoids the problems associated with conventional hybrid methods such as delamination failure, and enables flexible forming and stable joining of metal and composite materials on a macroscopic scale. The mechanical properties and failure modes of this new hybrid structure under quasistatic tensile loading are investigated by non-contact image measurement and analysis techniques. The results show that: the delamination cracks originate from the strain difference and shear stress between the different material layers, while the stitching fibres can inhibit the crack extension at the delamination interface and improve the fracture toughness; the tensile strength of the hybrid structure decreases with the thickness of the structure increasing, and only changing the pre-determined hole shape has no significant effect on the general mechanical properties of the hybrid structure; the hybrid structure is affected by various failure modes, mainly involving warp fracture, matrix failure, fracture and pull-out of the suture fibres, plastic failure of the metal, etc.

Key words： metal additive manufacturing woven composite hybrid structure tensile property failure mechanism

Published: Online: 2022-10-26

CLC number:

TB333

Fund:Innovation Guidance Fund, Institute of Engineering Thermophysics, Chinese Academy of Sciences(Y85402BZ11).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Duoduo
	ZHENG Huilong
	KANG Zhenya
	XI Changqing
	ZHANG Tan

Cite this article:

WU Duoduo,ZHENG Huilong,KANG Zhenya, et al. Tensile Properties and Failure Mechanisms Analysis of Composite Hybrid Structures Based on Metal Skeletons[J]. Materials Reports, 2022, 36(20): 21050214-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21050214 OR http://www.mater-rep.com/EN/Y2022/V36/I20/21050214

1 Gao Y, Li J L. Journal of Donghua University (English Edition), 2015, 32(3), 117.
2 Du S Y. Act Materia Composita Sinica, 2007, 24(1), 12(in Chinese).
杜善义. 复合材料学报, 2007, 24(1), 12.
3 Ma X Q, Su Z T. Journal of Materials Engineering, 2020, 48(10), 48(in Chinese).
马绪强, 苏正涛. 材料工程, 2020, 48(10), 48.
4 Lehmhus D, Hehl A V, Hausmann J, et al. Advanced Engineering Materials, 2019, 21(6), 1900056.
5 Kazemi M E, Shanmugam L, Yang L, et al. Composites Part A: Applied Science and Manufacturing, 2019, 128, 105679.
6 Zou T C, Qin J X, Li L H, et al. Materials Reports B:Research Papers, 2020, 34(10), 147(in Chinese).
邹田春,秦嘉徐,李龙辉,等. 材料导报:研究篇,2020,34(10),147.
7 Qiao H T, Liang B, Zhang J Y, et al. Journal of Materials Engineering, 2018, 46(12), 38(in Chinese).
乔海涛, 梁滨, 张军营, 等. 材料工程,2018, 46(12), 38.
8 Amancio S T, Bueno C, Dos Santos J F, et al. Materials Science & Engineering A, 2011, 528(10-11), 3841.
9 Pramanik A, Basak A K, Dong Y, et al. Composites Part A Applied Science & Manufacturing, 2017, 101, 1.
10 Mariam M, Afendi M, Abdul Majid M S, et al. Composite Structures, 2018, 200, 647.
11 Meschut G, Hahn O, Janzen V, et al. Welding in the World, 2014, 58(1), 65.
12 Zitoune R, Collombet F. Composites Part A: Applied Science and Manufacturing, 2007, 38(3), 858.
13 Feistauer E E, Dos Santos J F, Amancio-Filho S T, et al. Polymer Engineering and Science,2019, 59(4), 661.
14 Xiong W, Blackman B, Dear J P, et al. Composite Structures, 2015,134, 587.
15 Li N, Chen P H, Liu X Y, et al. Composites Science & Technology, 2015, 117, 334.
16 Reisgen U, Schiebahn A, Lotte J, et al. Journal of Materials Processing Technology, 2020, 282(1), 116674.
17 Abe H, Chung J C, Mori T, et al. Composites Part B: Engineering, 2019, 172, 26.
18 Parkes P N, Butler R, Meyer J, et al. Composite Structures, 2014, 118(1), 250.
19 Ramaswamy K, O’higgins R M, Corbett M C, et al. Composite Structures, 2020, 253, 112769.
20 Lu Y R, Hua Y, Chen X H, et al. Journal of Materials Engineering, 2020, 450(11), 166(in Chinese).
卢轶榕, 华勇, 陈秀华, 等. 材料工程, 2020, 450(11), 166.
21 Zhou Y D, Sun Y C, Huang T L, et al. Symmetry in Applied Continuous Mechanics, 2019, 11(10), 1292.
22 Bigaud J, Aboura Z, Martins A T, et al. Composite Structures, 2017, 184, 249.
23 Ghasemnejad H, Argentiero Y,Tez T A, et al. Materials and Design, 2013, 51(10), 552.
24 Ma Y Q, Qi L H, Zheng W Q, et al. Transactions of Nonferrous Metals Society of China (English Edition), 2013, 23(7), 1915.
25 Bai R X, Bao S H, Lei Z K, et al. International Journal of Adhesion and Adhesives, 2018, 81, 48.
26 Sharma A P, Khan S H, Parameswaran V, et al. Journal of Composite Materials, 2020, 53(11), 1489.
27 Isart N, Elsaid B, Ivanov D, et al. Composite Structures,2015,132,1219.
28 Wang C Z, Lu Y, He W T, et al. Thin-Walled Structures, 2020, 154(7), 106866.
29 Chen X C. Interlaminar fracture toughness and impact response of a novel fiber metal laminate, Master’s Thesis, Dalian University of Technology, China, 2020(in Chinese).
陈星弛. 新型金属纤维层板层间断裂韧性及冲击响应. 硕士学位论文, 大连理工大学, 2020.