| ADVANCED STRUCTURAL COMPOSITE MATERIALS |
|
|
|
|
|
| Investigation on Ultimate Bearing Capability of Cracked Filament Wounded Composite Cylindrical Shells Subjected to Axial Compression |
| CHEN Yue, ZHU Xi, ZHU Zixu, LI Huadong
|
| Department of Naval Architecture Engineering,Naval University of Engineering,Wuhan 430033 |
|
|
|
|
Abstract In this study, the ultimate load capability and failure modes of filament-wounded composite cylindrical shells with through crack has been investigated. First, axial compression test was carried out for two series filament-wounded cracked cylindrical shells. For A series thick wall cylindrical shell, crack led a 53.96% drop in load capability, and the failure mode transferred from local buckling to crack propagation and brittle fracture. For B series thin wall cylindrical shell, the failure modes were local buckling and the load capability decreased by 12.59%. Then, numerical analysis of cracked composite cylindrical shells under axial compression was developed by ABAQUS 6.14 using nonlinear algorithm RIKS. The Hashin failure criteria and damage evolution guidelines were introduced in the model to predict the progressive failure modes and the ultimate load. A good agreement was observed between numerical simulation and experimental results, and the maximum error was 7.01%. Furthermore, the effects of crack orientation and wind angle on the load capability of an axially loaded cracked cylindrical shell were studied. For cracked filament-wounded composite cylindrical shell with ±55° layer, the ultimate bearing capability increased first then decreased with the increasing crack orientation. The maximum limit load was got when α=45°.With the increase of wind angle ,the carrying capability showed a downward trend after the first rise for cylindrical shells with α=15°,45°,55° crack. And the wind angle had a more obvious influence on carrying capability with smaller crack orientation. The maximum limit load was got when θ=30°.
|
|
Published: 08 May 2018
|
|
|
|
|
1 El Naschie M S. Branching solution for local buckling of a circumfe-rentially cracked cylindrical shell[J]. Int J Mechan Sci,1974,16:689.
2 Estekanchi H E, Vafai A. On the buckling of cylindrical shells with through cracks under axial load[J]. Thin Wall Struct,1999,35(4):255.
3 Estekanchi H E, Vafai A, Kheradmandnia K. Finite element buckling analysis of cracked cylindrical shells under torsion[J]. Asian J Civ Eng,2002,3(2):73.
4 Jr J H S, Cheryl A R. Nonlinear response of thin cylindrical shells with longitudinal cracks and subjected to internal pressure and axial compression loads[C]∥38th Structures, Structural Dynamics, and Materials Conference(AIAA).Kissimmee, VSA,1997:2213.
5 Jr J H S, Cheryl A R. Buckling and stable tearing responses of unstiffened aluminium shells with long cracks[M]. Williamsbarg: NASA Langley Technical Report Server,1998.
6 Vaziri A, Estekanchi H E. Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression[J].Thin-Walled Structures,2006,44:141.
7 Vaziri A. On the buckling of cracked composite cylindrical shells under axial compression[J]. Composite Structures,2007,80(1):152.
8 Babak H J, Ashkan V. Instability of cylindrical shells with single and multiple cracks under axial compression[J]. Thin-Walled Structures,2012,54:35.
9 Rahman S, Hamed S G, Mohammad F. Buckling of cracked cylindrical panels under axially compressive and tensile loads[J]. Thin-Walled Structures,2015,94:45.
10 Shariati M, Sedighi M, Saemi J, et al. Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading[J]. Mechanika,2010,84(4):12.
11 Yang Manman, Cheng Xiaoquan, Hu Renwei. Analysis and experiments of composite cracked cylindrical shell under axial compression[J].Hi-Tech Fiber Application,2015,40(2):53.
杨曼曼,程小全,胡仁伟.复合材料开缝柱壳压缩屈曲分析与试验[J].高科技纤维与应用,2015,40(2):53.
12 Wu Pengfei, Cheng Xiaoquan, Zhang Tao, et al. Effect of penetrated crack on compressive buckling performance of composite cylindrical shells with an open hole[J]. Polym Mater Sci Eng,2013,29(10):179.
武鹏飞, 程小全, 张涛, 等. 穿透裂缝对开口复合材料柱壳屈曲性能的影响[J]. 高分子材料科学与工程, 2013,29(10):179.
13 Chen Ruxun. Structure analysis for filament wound cylinder pressure[J]. J Solid Rocket Technol,2004,27(2):105.
陈汝训.纤维缠绕圆筒压力容器结构分析[J].固体火箭技术,2004,27(2):105.
14 Javidruzi M, Vafai A, Chen J F, et al. Vibration, buckling and dynamic stability of cracked cylindrical shells[J]. Thin-Walled Structures,2004,42:79.
15 Hashin Z. Failure criteria for unidirectional fiber composites[J].J Appl Mechan,1980,47(2):329.
|
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
