金属材料激光增材制造路径规划研究现状与展望

doi:10.11896/cldb.22060243

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (21047KB)
Export: BibTeX | EndNote (RIS)

Abstract Laser additive manufacturing technology can shape arbitrarily complex parts and is widely used in aerospace, automotive, marine, medical apparatus, and other fields. Depending on the powder delivery method, laser additive manufacturing technology can be divided into selective laser melting technology with pre-positioned powder lay down in the powder bed and laser directed energy deposition technology with simultaneous powder delivery in the powder feeder. Path planning is an essential step in the laser additive manufacturing process. When different path strategies are used, the part forming quality and the mechanical properties can vary greatly, even if the hardware equipment and process parameters remain consistent. Many scholars have conducted extensive research on path planning strategies for different targets. This paper summarizes the current research status of laser additive manufacturing path planning. It compares and analyzes the path planning strategies for two goals:improving the forming quality and mechanical properties. Finally, future research on laser additive manufacturing path planning is prospected to provide a direction for further research.

Key words： laser additive manufacturing path planning forming quality mechanical property

Published: 25 February 2024 Online: 2024-03-01

CLC number:	TG14
	TH162

Fund:National Science and Technology Major Project (2019-Ⅶ-0004-0144) and the Liaoning BaiQianWan Talents Program (LNBQW 2020B0050).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHAI Yuanxin
	XING Fei
	LI Dianqi
	SHI Jianjun
	MIAO Liguo
	BIAN Hongyou
	YAN Chengxin

Cite this article:

CHAI Yuanxin,XING Fei,LI Dianqi, et al. Status and Prospect of Research on Laser Additive Manufacturing Path Planning for Metallic Materials[J]. Materials Reports, 2024, 38(4): 22060243-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22060243 OR http://www.mater-rep.com/EN/Y2024/V38/I4/22060243

1 Adeyemi A, Akinlabi E T, Mahamood R M. Materials Today:Procee-dings, 2018, 5(9), 18510.
2 Ling W, Wang X, Wang L, et al. Optics & Laser Technology, 2023, 157, 108648.
3 Lu H, Zhang X, Liu J, et al. Journal of Alloys and Compounds, 2022, 925, 166720.
4 Pang X, Xiong Z, Liu S, et al. Materials Science and Engineering:A, 2022, 857, 144104.
5 Wang Q Z, Lin X, Kang N, et al. Materials Science and Engineering:A, 2022, 840, 142950.
6 Xiao H, Chen C, Zhang M. Materials Research Express, 2019, 6(11), 116574.
7 Mahamood R M, Akinlabi E T. The International Journal of Advanced Manufacturing Technology, 2018, 99(5), 1545.
8 Paul S, Singh R, Yan W, et al. Scientific Reports, 2018, 8(1), 1.
9 Tan C, Zhou K, Ma W, et al. Acta Metall Sin, 2019, 56(1), 36.
10 Shiva S, Yadaiah N, Palani I A, et al. Journal of Manufacturing Processes, 2019, 48, 98.
11 Tang M, Lin X, Huang W. Materials Technology, 2016, 31(2), 90.
12 Zhang H, Zhao Y, Cai J, et al. Materials & Design, 2021, 201, 109462.
13 Doñate-Buendia C, Kürnsteiner P, Stern F, et al. Acta Materialia, 2021, 206, 116566.
14 Zhou L, Sun J, Chen J, et al. Journal of Alloys and Compounds, 2022, 928, 167130.
15 Peng J, Li J, Liu B, et al. Journal of Materials Science & Technology, 2023, 133, 12.
16 Seede R, Shoukr D, Zhang B, et al. Acta Materialia, 2020, 186, 199.
17 Su Y, Wang Y, Shi J. Materials Science and Engineering:A, 2022, 857, 144075.
18 Hespeler S, Dehghan-Niri E, Juhasz M, et al. Applied Sciences, 2022, 12(18), 8974.
19 Kim H, Lee K K, Ahn D G, et al. Materials, 2021, 14(7), 1794.
20 Cheng Y, Cao C, Yang X, et al. Materials Chemistry and Physics, 2022, 290, 126617.
21 Al-Musaibeli H, Ahmad R. The International Journal of Advanced Manufacturing Technology, 2022, 122(3), 1259.
22 Zhang X, Cui W, Li W, et al. The International Journal of Advanced Manufacturing Technology, 2019, 100(5), 1607.
23 Ren K, Chew Y, Fuh J Y H, et al. Materials & Design, 2019, 162, 80.
24 Haibo H, Wenlei S, Guan Z, et al. China Surface Engineering, 2018, 31(5), 175.
25 Xiang Z, Yan R, Wu X, et al. Optik, 2020, 206, 164316.
26 Wang X, Sun W, Chen Y, et al. The International Journal of Advanced Manufacturing Technology, 2018, 96(5), 2397.
27 Tao P, Li H, Huang B, et al. China Foundry, 2018, 15(4), 243.
28 Liu W, Saleheen K M, Tang Z, et al. Optical Engineering, 2021, 60(7), 070901.
29 Tang Q, Yin S, Zhang Y, et al. The International Journal of Advanced Manufacturing Technology, 2018, 98(5), 1671.
30 Tang X, Luo K, Lu J. Materials Research Express, 2021, 8(2), 026523.
31 Zhao J, Liu W, Xia R, et al. In:2007 International Conference on Mechatronics and Automation. Harbin, 2007, pp. 587.
32 Zhang W, Shi Y, Liu B, et al. The International Journal of Advanced Manufacturing Technology, 2009, 41(7), 706.
33 Bian H Y, Fan Q C, Li Y, et al. Journal of Mechanical Engineering, 2015, 51(24), 57 (in Chinese).
卞宏友, 范钦春, 李英, 等. 机械工程学报, 2015, 51(24), 57.
34 Yeung H, Lane B, Fox J, et al. In:2017 International Solid Freeform Fabrication Symposium. Austin, 2017, pp. 1423.
35 Zhang H, Gu D, Dai D. Virtual and Physical Prototyping, 2022, 17(2), 308.
36 Buser M, Onuseit V, Graf T. Optics and Lasers in Engineering, 2021, 138, 106412.
37 Jia H, Sun H, Wang H, et al. The International Journal of Advanced Manufacturing Technology, 2021, 113(9), 2413.
38 Chen C, Yin J, Zhu H, et al. International Journal of Machine Tools and Manufacture, 2019, 145, 103433.
39 Foroozmehr E, Kovacevic R. The International Journal of Advanced Manufacturing Technology, 2010, 51(5), 659.
40 Bian H Y, Yang G, Li Y, et al. Journal of Mechanical Engineering, 2013, 49(11), 171 (in Chinese).
卞宏友, 杨光, 李英, 等. 机械工程学报, 2013, 49(11), 171.
41 Kudzal A, McWilliams B, Hofmeister C, et al. Materials & Design, 2017, 133, 205.
42 Rashid R, Masood S H, Ruan D, et al. Journal of Materials Processing Technology, 2017, 249, 502.
43 Javidrad H R, Ghanbari M, Javidrad F. Journal of Materials Research and Technology, 2021, 12, 989.
44 Biegler M, Wang J, Kaiser L, et al. Steel Research International, 2020, 91(11), 2000017.
45 Bian H Y, Yang G, Wang G, et al. In:Applied Mechanics and Mate-rials. Wuhan, 2012, pp. 79.
46 Mohanty S, Tutum C C, Hattel J H. In:Laser-based Micro-and Na-nopackaging and Assembly VII. San Francisco, 2013, pp. 115.
47 Lu Y, Wu S, Gan Y, et al. Optics & Laser Technology, 2015, 75, 197.
48 Tolosa I, Garciandía F, Zubiri F, et al. The International Journal of Advanced Manufacturing Technology, 2010, 51(5), 639.
49 Cheng B, Shrestha S, Chou K. Additive Manufacturing, 2016, 12, 240.
50 Zhang K, Shang X F. In:Applied Mechanics and Materials. Shanghai, 2011, pp. 2640.
51 Ren Z, Tian Y L, Zhou M Y, et al. In:Advanced Materials Research. Guillin, 2012, pp. 1538.
52 Wang W, He Y, Qin L Y, et al. Applied Laser, 2016, 36(4), 373 (in Chinese).
王伟, 何妍, 钦兰云, 等. 应用激光, 2016, 36(4), 373.
53 Li J, Deng D, Hou X, et al. Materials Science and Technology, 2016, 32(12), 1223.
54 Zhang L, Ding L, Ullah S, et al. Rapid Prototyping Journal, 2020, 26(10), 1751.
55 Wang D, Wu S, Yang Y, et al. Materials, 2018, 11(10), 1821.
56 Sun Q, Guo K, Wang X, et al. Materials Science and Engineering:A, 2020, 793, 139879.
57 Deng Y Y, Li W S. Journal of Graphics, 2022, 43(1), 149 (in Chinese).
邓洋洋, 李维诗. 图学学报, 2022, 43(1), 149.