沥青温拌技术分类及温拌效果的试验评价方法

doi:10.11896/cldb.22080003

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2332KB)
Export: BibTeX | EndNote (RIS)

Abstract The warm mix asphalt (WMA) technique has been widely used in pavement engineering. In order to quantitatively evaluate effects of WMA additives on the asphalt mixture mixing process, a variable speed mixing test device for experimental evaluation of asphalt mixture was developed in this study. Newly developed WMA chemical additive (named Alube) and organic additive (named ACMP), and commercially available Evotherm WMA additive, will be used to prepare warm-mixed asphalt binders and the corresponding AC-13C asphalt mixtures. Both penetration grade 70^# and SBS modified asphalt binders will be used as the base asphalt for WMA. By evaluating penetration grade, softening point, ductility, Brookfield viscosity and dynamic shear rheological parameters of 70^# pen asphalt binder, SBS modified asphalt binder, and three warm-mixed asphalt binders, the viscosity-temperature curve characteristics were evaluated. Based on the compaction test with variable temperatures and mixing test with variable speeds, the compaction characteristic and the mixing flowability of asphalt mixtures were evaluated. The mixing flo-wability model was also developed. The results indicated that organic type WMA additive can reduce the viscosity of asphalt binders, which will increase the flowability of asphalt mixtures. In turn, penetration, ductility, and phase angle of asphalt binders will be increased, while the softening point and Brookfield viscosity will be decreased. On the other hand, the chemical type WMA additive did not change the basic technical properties of asphalt binders. The viscosity-temperature curve can only characterize the temperature variation during mixing process for asphalt mixtures with organic type WMA additive, and the equal-viscosity temperature can be reduced by 9 ℃. The compaction method with variable temperatures and mixing method with variable speeds can simultaneously characterize the effects of both types of WMA additives on mixing process. The mixing flowability of the asphalt mixture can be described by the Bingham’s model, which can well explain the mixing flowability and workability of mixtures based on the rheology theory. Thus, the mixing test with variable speeds is recommended to evaluate the effects of WMA additives on mi-xing process. Based on the up-to-date WMA techniques, the mixing temperature can be reduced by 20 ℃ to 30 ℃ as compared with regular hot mix asphalt if WMA additives are added at common dosage, which agrees with the current main understanding of WMA techniques.

Key words： road engineering asphalt mixture warm mix asphalt technique experimental evaluation variable mixing speed test Bingham’s model

Published: 25 February 2024 Online: 2024-03-01

CLC number:

U414

Fund:Natural Science Fund of Shaanxi Province (2020GY-304),Technique Fund of Sichuan R&B Construction Co.(KY2021srbg-10-12), and Natural Science Fund of Ankang Municipality (AK2021-GY-13).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YAN Xili
	ZHENG Tao
	JIANG Shuangquan
	LI Weicheng

Cite this article:

YAN Xili,ZHENG Tao,JIANG Shuangquan, et al. Technique Types of Warm Mix Asphalt and Experimental Methods to Evaluate the Warm Effect[J]. Materials Reports, 2024, 38(4): 22080003-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22080003 OR http://www.mater-rep.com/EN/Y2024/V38/I4/22080003

1 European Asphalt Pavement Association. EAPA-Position paper, Brussels, Belgium, 2014.
2 Capitão S D, Picado-Santos L G, Martinho F. Construction and Building Materials, 2012, 36, 1016.
3 Damm K W, Hinrichsen A J. In: 6th RILEM Symposium-Performance Testing and Evaluation of Bituminous Materials’03. Zurich, 2003, pp. 520.
4 Yan X L, Ai T, Xia Z P, et al. Research and development of surfactant WMA additive and its pavement application technology. Research Report, Department of Transportation of Sichuan Province, China, 2020(in Chinese).
延西利, 艾涛, 夏泽沛, 等. 表面活性剂型沥青温拌剂的研发及应用技术研究. 研究报告, 四川省交通运输厅, 2020.
5 Editorial Department of China Journal of Highway and Transport. China Journal of Highway and Transport, 2020, 33(10), 1(in Chinese).
《中国公路学报》编辑部. 中国公路学报, 2020, 33(10), 1.
6 Hunter R N, Self A, Read J. The shell bitumen handbook (sixth ed.), ICE Publishing, London, UK, 2015.
7 Marvillet J, Bougault P. Proceedings of Association of Asphalt Paving Technologists, 1979, 48, 91.
8 Gudimettla J M, Cooley L A, Brown E R. Transportation Research Record: Journal of the Transportation Research Board, 2004, 1891(1), 229.
9 Abed A, Thom N, Grenfell J. Construction and Building Materials, 2019, 200, 80.
10 Wang C, Hao P, Ruan F. Construction and Building Materials, 2013, 48, 1165.
11 Zhao G J, Guo P. Energy Procedia, 2012, 16, 1230.
12 Hou S G. Journal of Nanjing University of Technology (Natural Science Edition), 2011, 33(5), 36(in Chinese).
侯曙光. 南京工业大学学报(自然科学版), 2011, 33(5), 36.
13 Guo P, Duan L Y. Journal of Shandong Agricultural University (Natural Science Edition), 2012, 43(1), 119(in Chinese).
郭平, 段凌云. 山东农业大学学报(自然科学版), 2012, 43(1), 119.
14 Hurley G C, Prowell B D. Evaluation of Aspha-min^® for use in warm mix asphalt, NCAT Report 05-04, USA, 2005.
15 hurley G C, Prowell B D. Evaluation of Sasobit^® for use in warm mix asphalt, NCAT Report 05-06, USA, 2005.
16 Hurley G C, Prowell B D. Evaluation of Evotherm^® for use in warm mix asphalt, NCAT Report 06-02, USA, 2006.
17 Wu C, Zeng M L, Wang M W, et al. Journal of Hunan University (Natural Science Edition) 2010, 37(8), 1.
18 Chen X, Yang P, Wu Y Z, et al. Journal of Chang’an University (Na-tural Science Edition), 2012, 32(2), 45(in Chinese).
陈骁, 杨平, 吴亚中, 等. 长安大学学报(自然科学版), 2012, 32(2), 45.
19 Yan X L, Yong L M, Yan M L, et al. China Journal of Highway and Transport, 2015, 28(8), 1(in Chinese).
延西利, 雍黎明, 延梦璐, 等. 中国公路学报, 2015, 28(8), 1.
20 Wei J G, Wang Z L, Fu Q L. Journal of Chang’an University (Natural Science Edition), 2013, 33(6), 17(in Chinese).
巍建国, 王兆仑, 付其林. 长安大学学报(自然科学版), 2013, 33(6), 17.
21 Zhang J. Technical performance of the new surfactant-based asphalt warming agent. Master’s Thesis, Chang’an University, China, 2019 (in Chinese).
张进. 新型表面活性剂型沥青温拌剂的技术性能. 硕士学位论文, 长安大学, 2019.
22 Yan X L, Chen S L, An S W, et al. Journal of Traffic and Transportation Engineering, 2017, 17(1), 11(in Chinese).
延西利, 陈四来, 安舒文, 等. 交通运输工程学报, 2017, 17(1), 11.
23 Menapace I, Masad E, Little D, et al. Sustainability, eco-efficiency, and conservation in transportation infrastructure asset management, CRC Press, London, 2014, pp. 157.
24 Kök B V, Yilmaz M, Akpolat M. Construction and Building Materials, 2014, 63, 174.
25 Yan X L, Jing H J, You Q L, et al. China Civil Engineering Journal, 2019, 52(10), 120(in Chinese).
延西利, 景宏君, 游庆龙, 等. 土木工程学报, 2019, 52(10), 120.
26 Yan X L, Tian H L, Yan X L, et al. Journal of Traffic and Transportation Engineering, 2016, 16(3), 1(in Chinese).
延西利, 田辉黎, 延喜乐, 等. 交通运输工程学报, 2016, 16(3), 1.
27 Li X Y, Wang H N, Zhang C, et al. Journal of Testing and Evaluation, 2016, 44, 2219.
28 Kim Y, Lee J, Back C, et al. Advances in Materials Science and Engineering, 2012, 2012, 1.