| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Microstructure and Property of TIG Welded Joint of FeCrAl Alloy Tube |
| CAO Rui1,*, WANG Henglin1, QIN Wei2, LIU Shaozun2, ZHOU Shuangshuang2, LIU Yibo2, WANG Tiejun2, YAN Yingjie1
|
1 The State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
2 Advanced Technology & Materials Co., Ltd., China Iron & Steel Research Technology Co., Ltd., Beijing 100081, China |
|
|
|
|
Abstract The homogenous materials of FeCrAl alloy tube were welded by TIG welding. By scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy, the microstructure characteristics of the welded joint, the distribution of oxide particles in different areas of the welded joint and the mechanical properties of the welded joint were investigated. TIG welding of FeCrAl alloy was carried out by filling FeCrAl alloy wire. The welding joint was mainly composed of weld zone, heat affected zone and base metal. The weld metal zone is composed of coarse ferrite microstructure. The heat affected zone is composed of fine equiaxed crystal microstructure. The oxide particles are obviously coarsened in the weld metal zone. A certain number of oxide particles can still be guaranteed in the weld metal zone. Oxide particles grow up from the original nano oxide particles into sub-micron oxide particles duringthe welding process. Moreover, Y2O3 oxide particles decompose and react with matrix to form composite oxide Y3Al5O12. The maximum tensile strength of TIG welded FeCrAl alloy tube reaches 530 MPa, which is about 80.8% of the strength of base material. The mechanical properties of butt joints of FeCrAl alloy tube with large diameter and large wall thickness can be achieved.
|
|
Published: 25 January 2024
Online: 2024-01-26
|
|
|
| Fund:National Natural Science Foundation of China (52175325,51961024,52071170). |
|
|
1 Gussev M N, Field K G, Yamamoto Y. Materials & Design, 2017, 129, 227.
2 Olivier Doyen, Brendan Le Gloannec, Alexis Deschamps, et al. Journal of Nuclear Materials, 2019, 518, 326.
3 Cao R, Wang H L, Che H Y, et al. Welding & Joining, 2021, 1(10), 1(in Chinese).
曹睿, 王恒霖, 车洪艳, 等. 焊接, 2021, 1(10), 1.
4 Liang Shenyong, Lei Yucheng, Zhu Qiang, et al. Journal of Nuclear Materials, 2015, 456, 206.
5 Gussev M N, Cakmak E, Field K G, et al. Journal of Nuclear Materials, 2018, 504, 221.
6 Anumat Sittiho, Vedavyas Tungala, Indrajit Charit, et al. Journal of Nuclear Materials, 2018, 509, 435.
7 Jerred N D, Charit T, Zirker L R, et al. Journal of Nuclear Materials, 2018, 508, 265.
8 Rebak R B.Accident-tolerant materials for light water reactor fuels(1st Ed), Cambridge, USA, Elsevier, 2020.
9 Wu Y, Haney E M, Cunningham N J, et al. Acta Materialia, 2012, 60(1), 3456.
10 Lei Y C, Li M G, Cheng L. Chinese Journal of Material Research, 2012, 26(4), 383 (in Chinese).
雷玉成, 李猛刚, 承龙. 材料研究学报, 2012, 26(4), 383.
11 Lei Y C, Gong C C, Luo Y, et al. Chinese Journal of Material Research, 2014, 28(2), 93 (in Chinese).
雷玉成, 龚晨诚, 罗雅, 等. 材料研究学报, 2014, 28(2), 93.
12 Lei Y C, Ren W J, Xie W F, et al. Transactions of the China Welding Institution, 2011, 32(11), 1(in Chinese).
雷玉成, 任闻杰, 谢伟峰, 等. 焊接学报, 2011, 32(11), 1.
13 Liang S Y, Lei Y C, Zhao K, et al. Materials Science ＆ Technology, 2013, 21(5), 20(in Chinese).
梁申勇, 雷玉成, 赵凯, 等. 材料科学与工艺, 2013, 21(5), 20.
14 Zhua Qiang, Lei Yucheng, Wang Yunlong, et al. Fusion Engineering and Design, 2014 89, 2964.
15 Cui Z Q, Tan Y C. Metallography and heat treatment, Machine Press, China, 2016, pp. 29(in Chinese).
崔忠圻, 覃耀春. 金属学与热处理, 机械工业出版社, 2016, pp. 29. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2024, Vol. 38 
