| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Research Advances in Cold-bonded Artificial Lightweight Aggregates Made from Industrial Solid Waste Materials |
| LIU Jun1,2, LI Zhenlin1,2, ZHANG Weizhuo1,2, JIN Hesong1,2,*, XING Feng1,2
|
1 College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, Guangdong, China
2 Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen 518060, Guangdong, China |
|
|
|
|
Abstract Cold-bonded lightweight aggregates (CBLAs) made from solid waste are used as a new type of eco-friendly material to meet the requirements of resource reuse, energy savings, environmental pollution reduction and sustainable development strategies. It is the main research and promotion direction for designing eco-efficiency concrete. Recently, one of the important means to enhance the performance of green concrete with CBLAs has been to improve the defects of CBLAs, such as high-water absorption, poor firmness, numerous holes, and dry cracks. The existing methods for improving the properties of CBLAs prepared from solid waste mainly start from the granulation process and curing system, such as CO2 curing, sintering curing, and extrusion granulation. Furthermore, the performance of CBLAs can also be effectively improved by adjusting the type and dosage of solid waste materials. In addition, with the help of different microscopic analysis methods (scanning electron microscopy, thermal analysis of hydration, thermogravimetric analysis, X-ray analysis), and by analyzing the factors affecting the mechanical properties and physical properties of CBLAs, such as chemical composition, granulation equipment parameters, and using methods such as fiber reinforcement and alkaline treatment, the performance of CBLAs can also be optimized. The types and applications of industrial solid wastes, granulation methods, curing processes, mechanical strength, physical properties and microscopic properties of CBLAs are mainly reviewed, and future research tasks and improvement directions of CBLAs are also proposed in this paper.
|
|
Published: 25 September 2023
Online: 2023-09-18
|
|
|
| Fund:Shenzhen Sustainable Development Technology Project (KCXFZ20201221173202008), National Natural Science Foundation of China (52178234), Shenzhen International Cooperation Research Project (GJHZ20180928155602083). |
|
|
1 Steady progress towards high-quality development driven by innovation—2019 China Concrete and Cement Products Industry Operation Report. Economic Operation Department of China Concrete and Cement Products Association, 2020 (in Chinese).
创新驱动向高质量发展稳步前行—2019年中国混凝土与水泥制品行业运行报告. 中国混凝土与水泥制品协会经济运行部, 2020.
2 Mefteh H, Kebaieli O, Oucief H, et al. Journal of Cleaner Production,2013, 54, 282.
3 Ready Mixed Concrete Branch of China Concrete and Cement Products Association. 2020 Annual Ready Mixed Concrete Industry Development Report. Beijing, 2021 (in Chinese).
2020年度预拌混凝土行业发展报告. 中国混凝土与水泥制品协会预拌混凝土分会. 北京, 2021.
4 Sharma R, Khan R A. Journal of Cleaner Production, 2017, 151, 179.
5 Xuan D, Zhan B, Poon C S, et al. Journal of Hazardous Materials, 2016, 312, 65.
6 Xuan D, Zhan B, Poon C S. Cement & Concrete Composites, 2016, 65, 67.
7 Zhang L. Construction & Building Materials, 2013, 47, 643.
8 Kayali O. Construction & Building Materials, 2008, 22 (12), 2393.
9 Ferraro A, Colangelo F, Farina I, et al. Critical Reviews in Environmental Science and Technology, 2020 (12), 1.
10 Nor A M, Yahya Z, Abdullah M, et al. Matec Web of Conferences, 2016, 78, 01067.
11 Priyadharshini P, Mohan G, Santhi A S. International Journal of Earth Sciences and Engineering, 2012.
12 Li J P, Li C Z, Wang T Y, et al. Chemical Machinery, 2001, 28 (5), 5 (in Chinese).
李建平, 李承政, 王天勇, 等.化工机械, 2001, 28 (5), 5.
13 Nesbitt R U. Drug Development and Industrial Pharmacy,1994, 20 (20), 3207.
14 Xi T P, Liu C Y. Fertilizer Industry, 1998, 25 (2), 6 (in Chinese).
奚天鹏, 刘传义.化肥工业, 1998, 25 (2), 6.
15 Wei Y F, Tian B. Electromechanical Information, 2013(8), 13 (in Chinese).
魏羽锋, 田冰.机电信息, 2013 (8), 13.
16 Iveson S M. Powder Technology, 2002, 124 (3), 219.
17 Bijen J. International Journal of Cement Composites & Lightweight Concrete, 1986, 8 (3), 191.
18 Arslan H, Baykal G. Environmental Geology, 2006, 50 (5), 761.
19 Tajra F, Abd Elrahman M, Stephan D. Construction and Building Mate-rials, 2019, 225, 29.
20 Kaige T, Yanshuai W, Shuxian H, et al. Construction and Building Materials, 2021, 281,122552.
21 Shi M, Ling T C, Gan B, et al. Construction and Building Materials, 2019, 199, 178.
22 Ipek S, Ayodele OA, Mermerdas, K. Construction and Building Mate-rials, 2020, 238,117756.
23 Jiang Y, Ling T C, Shi M. S. Journal of Cleaner Production, 2020, 257, 120515.
24 Tang P, Florea M, Brouwers H. Journal of Cleaner Production, 2017, 165,1371.
25 Tang P, Brouwers H J H. Construction and Building Materials, 2018, 167, 271.
26 Narattha C, Chaipanich A. Journal of Cleaner Production, 2018,171,1094.
27 Vali K S, Murugan S B. Advances in Concrete Construction, 2020, 9 (2), 183.
28 Reddy M, Nataraja M C, Sindhu K, et al. International Journal of Engineering Research and Technology, 2016, 9(2), 95.
29 Vali K S, Murugan S B. Revista Romana De Materiale-Romanian Journal of Materials, 2020, 50(1), 40.
30 Colangelo F, Messina F, Palma L D, et al. Composites Part B Enginee-ring, 2017, 116, 46.
31 Tajra F, Abd Elrahman M, Lehmann C, et al. Construction and Building Materials, 2019, 205, 39.
32 Shi M J, Lin Z C. Concrete, 2019 (9), 6 (in Chinese).
施敏蛟, 林忠财.混凝土, 2019 (9), 6.
33 Wu Z, Wang N, Wu J N, et al. Powder Metallurgy Technology, 2021, 39(3), 5 (in Chinese).
武洲, 王娜, 吴吉娜, 等.粉末冶金技术, 2021, 39 (3), 5.
34 Fan J Z. Fly Ash, 2007, 19 (6), 41 (in Chinese).
范锦忠.粉煤灰, 2007, 19 (6), 41.
35 李国安. 中国发明专利, CN202010503250.2, 2020.
36 Styron R W. U.S. patent, US06/669284, 1986.
37 Show K Y, Lee D J, Tay J H, et al. Journal of Environmental Enginee-ring, 2005, 131 (7), 1106.
38 Cheeseman C R, Sollars C J, Mcentee S. Resources Conservation & Recycling, 2004, 40 (1), 13.
39 Thomas J, Harilal B. Cement and Concrete Composites, 2015, 62, 67.
40 Geetha S, Ramamurthy K. Journal of Cleaner Production, 2010, 18 (15), 1563.
41 Manikandan R, Ramamurthy K. Cement & Concrete Composites, 2008, 30 (9), 848.
42 Tang P, Xuan D, Cheng H W, et al. Journal of Hazardous Materials, 2020, 381, 120951.
43 Fang Y F, Wang D, Wang Q, et al. Material Reports, 2020, 34 (3), 7 (in Chinese).
房延凤, 王丹, 王晴, 等.材料导报,2020, 34 (3), 7.
44 Pan X, Shi C, Hu X, et al. Construction and Building Materials, 2017, 154, 1087.
45 Ahmaruzzaman M. Progress in Energy & Combustion Science, 2010, 36 (3), 327.
46 Rivera F, Martínez P, Castro J, et al. Cement & Concrete Composites, 2015, 104.
47 Wang F H, Zhang F, Chen Y J, et al. Journal of Hazardous Materials, 2015, 300, 451.
48 Tang P, Florea M V A, Brouwers H J H,et al. 4th International Confe-rence on Sustainable Solid Waste Management, 2016, 23, 23.
49 Liu W, Yang J, Xiao B. Journal of Hazardous Materials, 2009, 161 (1), 474.
50 Xiao J, Ma Z, Sui T, et al. Journal of Cleaner Production, 2018, 188, 720.
51 Hwang C L, Tran V A. Construction & Building Materials, 2015, 87, 78.
52 Le A, Hwang C L, Chen C T, et al. Construction & Building Materials, 2012, 35, 1056.
53 Ferone C, Claudio F, Messina F, et al. Materials, 2013, 6 (11), 5000.
54 Harilal B, Thomas J. American Journal of Engineering Research, 2013, 1, 20.
55 Gesoğlu M, Güneyisi E, Öz HÖ. Materials & Structures, 2012, 45, 1535.
56 Chiou I J, Wang K S, Chen C H, et al. Waste Management, 2006,26 (12), 1453.
57 Terzi A, Pezo L, Miti V, et al. Ceramics International,2015, 41 (2), 2714.
58 Geetha S, Ramamurthy K. Cement & Concrete Composites, 2013, 43, 20.
59 Colangelo F, Cioffi R. Materials, 2013, 6(8), 3139.
60 Gomathi P, Sivakumar A. ARPN Journal of Engineering and Applied Sciences, 2012, 7(11), 1523.
61 Tang P, Brouwers H. Waste Management, 2017, 62, 125.
62 Vasugi V, Ramamurthy K. Materials and Design, 2014, 54, 264.
63 Colangelo. F, Messina. F, Raffaele Cioffi. Journal of Hazardous Mate-rials, 2015, 299, 181.
64 Bui L A T, Hwang C L, Chen C T, et al. Applied Mechanics & Materials, 2012, 174, 978.
65 Cioffi R, Colangelo F, Montagnaro F, et al. Waste Management, 2011, 31 (2), 281.
66 Priyadharshini P, Ganesh M, Santhi A S. International Journal for Computational Civil and Structural Engineering, 2011, 2 (2), 507.
67 Yildirim H, Özturan T. In:2nd International Balkans Conference on Challenges of Civil Engineering, BCCCE, Epoka University, Tirana, Albania., 2013.
68 Tajra F, Abd Elrahman M, Chung S Y, et al. Construction and Building Materials, 2018, 179, 220.
69 Gesoɡˇlu M, Özturan T, Güneyisi E. Construction & Building Materials, 2007, 21 (9), 1869.
70 Videla C, Martinez P M. In: Sustainable Concrete Construction. Proceedings of the International Conference Held at the University of Dundee. Scotland, UK, 2002, pp. 363.
71 Joseph G, Ramamurthy K. Construction & Building Materials, 2009, 23 (5), 1862.
72 Vijay P. International Journal of Recent Development in Engineering and Technology, 2015, 4(7), 37.
21090269-1773 Kockal N U, Ozturan T. Cement & Concrete Composites, 2011, 33 (1), 61.
74 Gomathi P, Sivakumar A. Construction & Building Materials, 2015, 77, 276.
75 Luca D P, Franco M, Giorgio V. Chemical Engineering Transactions, 2015, 43,1723.
76 Gueneyisi E, Gesoglu M, Altan I, et al. Construction and Building Materials, 2015, 74, 9.
77 Kumar V, Anandh K S, Kumar M V, et al. International Journal of Innovative Research in Technology, 2014, 6 (5), 120.
78 Baykal G, Döven A G. Resources, Conservation and Recycling, 2000, 30 (1), 59.
79 Manikandan R, Ramamurthy K. Journal of Materials in Civil Enginee-ring, 2009, 21 (10), 578.
80 Gesoglu M, Özturan T, Güneyisi E. Cement and Concrete Research, 2004, 34 (7), 1121.
81 Gueneyisi E, Gesoglu M, Ipek S. Construction & Building Materials, 2013, 47, 358.
82 Kockal N U, Ozturan T. Construction & Building Materials, 2011,25(3), 1430.
83 Chi J M, Huang R, Yang C C, et al. Cement & Concrete Composites, 2003, 25 (2), 197.
84 Gesoglu M, Gueneyisi E, Oezturan T, et al. Composites Part B Enginee-ring, 2014, 60, 757.
85 Frankovi A, Bosiljkov V B, Ducman V. Materiali in Tehnologije, 2018, 51 (2),267.
86 Gomathi P, Sivakumar A. Journal of Engineering & Applied Sciences, 2013,4(8),246.
87 Gesoglu M, Gueneyisi E, Mahmood S F, et al. Journal of Hazardous Materials, 2012, 235-236, 352.
88 Tangtermsirikula S, Wijeyewickremab A C. Science Asia, 2000, 26, 237.
89 Geetha S, Ramamurthy K. Waste Management, 2010, 30 (8), 1528.
90 GB/T 17431.2-2010, Lightweight aggregates and its test methods-Part 2: Test methods for lightweight aggregates, National Standardization Administration of the People's Republic of China, 2010 (in Chinese).
GB/T 17431.2-2010, 轻集料及其试验方法第2部分:轻集料试验方法, 中华人民共和国国家标准化管理委员会, 2010.
91 Liu J, Li Z, Zhang W, et al. Journal of Cleaner Production, 2022, 337, 130479.
92 GB/T 17431.1-2010. Lightweight aggregates and its test methods Part 1: Lightweight aggregates, National Standardization Administration of the People's Republic of China, 2010 (in Chinese).
GB/T 17431.1-2010. 轻集料及其试验方法第1部分:轻集料, 中华人民共和国国家标准化管理委员会, 2010.
93 DIN EN13055:2015, Lightweight aggregates 13055:2015 - annex C: determination of grain strength, European Committee Standardization, 2015.
94 JTG E42—2005, Test methods of aggregate for highway engineering, Highway Science Research Institute, Ministry of Communications. Highway Engineering Aggregate Test Regulations, 1994 (in Chinese).
JTG E42—2005, 公路工程集料试验规程, 交通部公路科学研究所. 公路工程集料试验规程,1994.
95 BS 812-111 B. Testing aggregates. part 111: methods for determination of ten per cent fines value (Tfv), British Standards Institution, UK, 1990.
96 Harikrishnan K I, Ramamurthy K. Waste Management, 2006, 26 (8), 846.
97 Tang P, Xuan D, Poon C S, et al. Journal of Hazardous Materials, 2019, 368, 689.
98 DIN EN 1097-6:2013-09. Test methods for mechanical and physical pro-perties of aggregates - Part 6: Determination of bulk density and water absorption , Technical Committee CEN/TC 154 “Aggregates”, European Committee Standardization, 2013.
99 ASTM C127, Standard test method for density, relative density (specific gravity), and absorption, PA: ASTM International, United States, 2014.
100 DIN EN 1097-3:1998-06, Test methods for mechanical and physical properties of aggregates - Part 3: Determination of bulk density and void content, Technical Committee CEN/TC 154 “Aggregates”, European Committee Standardization, 1998.
101 ASTM.C29/C29M-09, Standard test method for bulk density (“unit weight”) and voids in aggregate, PA: ASTM International, United States, 2010.
102 Guo Y S, Ding J T, Kimura K, et al. In: The 6th National Symposium on Lightweight Aggregate and Lightweight Aggregate Concrete, Tianjin, 2000 (in Chinese).
郭玉顺, 丁建彤, 木村熏, 等.第六届全国轻骨料及轻骨料混凝土学术讨论会, 天津,2000.
103 Hu S G, Wang F Z, Ding Q J, et al. Journal of Huazhong University of Science and Technology: Urban Science Edition, 2002, 19(2), 4 (in Chinese).
胡曙光, 王发洲, 丁庆军, 等.华中科技大学学报:城市科学版, 2002, 19(2), 4.
104 Wasserman R, Bentur A. Cement and Concrete Composites, 1996, 18 (1), 67.
105 Li D, Xu Z, Luo Z, et al. Cement & Concrete Research, 2002, 32 (7), 1145.
106 Han P, Wang J H, Lu A X, et al. Spectroscopy and Spectral Analysis, 2012, 32 (3), 4 (in Chinese).
韩平, 王纪华, 陆安祥, 等. 光谱学与光谱分析, 2012, 32 (3), 4.
107 Hu L Y, Zhang Q J, Shen Y. Journal of Hebei Union University (Natural Science Edition), 2004, 26 (3), 83 (in Chinese).
胡林彦, 张庆军, 沈毅.河北联合大学学报(自然科学版), 2004, 26 (3), 83.
108 Tang P, Chen W, Xuan D X, et al. Journal of Hazardous Materials, 2020, 393, 122386.
109 Chen Y, Li D X. Silicate Bulletin, 2006, 25 (4), 5 (in Chinese).
陈悦, 李东旭.硅酸盐通报,2006, 25 (4), 5.
110 Otsu N. IEEE Transactions on Systems Man & Cybernetics, 2007, 9 (1), 62.
111 Abràmoff M D, Magalhes P J, Ram S J. Biophotonics International, 2004, 11 (7), 36.
112 İpek S, Ayodele O A, Mermerdaş K. Construction and Building Mate-rials, 2020, 238, 117756.
113 Kim H K, Jeon J H, Lee H K. Construction & Building Materials, 2012, 29, 193.
114 Lo T Y, Cui H Z, Li Z G. Waste Management, 2004, 24 (4), 333.
115 Gesolu M, Güneyisi E, Zturan T, et al. Construction and Building Materials, 2014, 59 (3), 1.
116 Ke Y, Beaucour A L, Ortola S, et al. Construction & Building Materials, 2009, 23 (8), 2821.
117 Yoon J K, Jin Y, Kim J H, et al. Materials (Basel), 2015, 8(4), 1384.
118 Guneyisi E, Gesoglu M, Pursunlu O, et al. Composites Part B: Engineering, 2011, 53, 258.
119 Liu X, Chia K S, Zhang M H. Construction & Building Materials, 2011, 25 (1), 335.
120 Kockal N U, Ozturan T. Journal of Hazardous Materials, 2010, 179 (1-3), 954.
121 Zhutovsky S, Kovler K,Materials and Structures, 2002, 35 (246), 97.
122 Senneca O, Cortese L, Martino R D, et al. Journal of Cleaner Production, 2020, 261, 121230.
123 Yang Z, Ji R, Liu L, et al. Construction & Building Materials, 2018, 162, 794.
124 HJ 557-2009, Solid waste-extraction procedure for leaching toxicity-horizontal vibration method,Ministry of Environmental Protection of the People's Republic of China, 2010 (in Chinese).
HJ 557-2009, 固体废物浸出毒性浸出方法水平振荡法, 中华人民共和国国家环境保护部, 2010.
125 GB 5085.3-2007, Identification standards for hazardous wastes identification for extraction toxicity, State Environmental Protection Administration of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine, 2007 (in Chinese).
GB 5085.3-2007,危险废物鉴别标准浸出毒性鉴别, 中华人民共和国国家环境保护总局, 国家质量监督检验检疫总局, 2007.
126 EPA Method 1311, Test Method 1311-Toxicity characteristic leaching procedure, EPA-SW-846 Online, United States Environmental Protection Agency, U.S.1992.
127 Gong B, Deng Y, Yang Y, et al. Energy & Fuels, 2017, 31 (11), 12446. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
