电解液配方对纯镁微弧氧化膜层耐蚀性的影响

doi:10.11896/cldb.21100085

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (24352KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on simplex-centroid mixture design, micro-arc oxidation coatings were prepared on pure magnesium by changing the collocation of Na₂SiO₃, NaOH, KF and NaAlO₂. The effects of electrolyte composition on the corrosion resistance of the coating were studied. The results show that the regression equations are very significant and the prediction accuracy is high. According to the standardized regression coefficient and Pareto analysis, KF has a great influence on the corrosion resistance corresponding to spot test and electrochemical of the coating. The response surface analysis shows that KF can improve the dropping corrosion resistance of the coating. However, high concentration of KF is not conducive to the improvement of electrochemical corrosion resistance. The main salt Na₂SiO₃ and NaAlO₂ can obviously improve the electrochemical corrosion resistance of the coating. It can be seen that the difference in the corrosion mechanism between the spotting and electrochemical corrosion resistance is the primary reason for the difference in the effect of the electrolytes on the two indicators.

Key words： pure magnesium micro-arc oxidation electrolyte simplex-centroid mixture design regression analysis

Published: 10 August 2023 Online: 2023-08-07

CLC number:

TG174.45

Fund:Creative Research Group Fund Grant of Gansu Province(1111RJDA011).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Zhanying
	MA Ying
	AN Shoujing
	SUN Le

Cite this article:

WANG Zhanying,MA Ying,AN Shoujing, et al. Effect of Electrolyte Formulation on the Corrosion Resistance of Micro-arc Oxidation Coating of Pure Magnesium[J]. Materials Reports, 2023, 37(15): 21100085-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21100085 OR http://www.mater-rep.com/EN/Y2023/V37/I15/21100085

1 Yerokhin A L, Nie X, Leyland A, et al. Surface & Coatings Technology, 1999, 122(2-3), 73.
2 Ren C, Luo J, Chen Y, et al. Materials Review B:Research Papers, 2020, 34(9), 18081(in Chinese).
任超, 罗军明, 陈宇海, 等. 材料导报B:研究篇, 2020, 34(9), 18081.
3 Szkodo M, Stanislawska A, Komarov A, et al. Wear, 2021, 474-475, 203709.
4 Liu C, Lu X, Li Y, et al. Journal of Alloys and Compounds, 2021, 870, 159462.
5 Schneider M, Kremmer K, Höhn S. Materials and Corrosion, 2016, 67(9), 921.
6 Ryu H S, Hong S H. Journal of the Electrochemical Society, 2009, 156(9), C298.
7 Zhuang J J, Guo Y Q, Xiang N, et al. Applied Surface Science, 2015, 357, 1463.
8 Ziyaei E, Atapour M, Edris H, et al. Journal of Materials Engineering and Performance, 2017, 26(7), 3204.
9 Kazanski B, Kossenko A, Zinigrad M, et al. Applied Surface Science, 2013, 287, 461.
10 Vakili-Azghandi M, Fattah-Alhosseini A, Keshavarz M K. Measurement, 2018, 124, 252.
11 Ma N, Huang J, Su J, at al. Materials Review B:Research Papers, 2018, 32(8), 2768(in Chinese).
马妞, 黄佳木, 苏俊, 等. 材料导报B:研究篇, 2018, 32(8), 2768.
12 Guo H F, An M Z. Applied Surface Science, 2005, 246(1), 229.
13 Laveissière M, Gerda H, Roche J, et al. Surface & Coatings Technology, 2019, 361, 50.
14 Veys-Renaux D, Barchiche C E, Rocca E. Surface & Coatings Technology, 2014, 251(8), 232.
15 Chen Y, Yang Y, Zhang T, et al. Surface & Coatings Technology, 2016, 307, 825.
16 Li Y Y, Hu C R. Experiment Design and Data Processing, Chemical Industrial Press, China, 2008, pp. 209 (in Chinese).
李云雁, 胡传荣. 试验设计与数据处理, 化学工业出版社, 2008, pp. 209.
17 Jiao D, Shi C, Yuan Q, et al. Cement and Concrete Composites, 2018, 89, 76.
18 Dias F F G. Castro R J S, Ohara A, et al. Biocatalysis and Agricultural Biotechnology, 2015, 4, 528.
19 Castro R J S. Sato H H. Industrial Crops and Products, 2013, 49, 813.
20 Handa C L, Lima F S, Guelfi M F G, et al. Food Chemistry, 2016, 197, 175.
21 Wang Z, Ma Y, Wang Y. Metals, 2020, 10, 1146.
22 Zulkali M M D, Ahmad A L, Norulakmal N H. Bioresource Technology, 2006, 97(1), 21.
23 Martinello T, Kaneko T M, Velasco M V R, et al. International Journal of Pharmaceutics, 2006, 322(1-2), 87.
24 Zarei M, Niaei A, Salari D, et al. Journal of Hazardous Materials, 2010, 173, 544.
25 Ge Y, Jiang B, Shi H. The Chinese Journal of Nonferrous Metals, 2013, 23(4), 950(in Chinese).
葛延峰, 蒋百灵, 时惠英. 中国有色金属学报, 2013, 23(4), 950.
26 Yerokhin A L, Leyland A, Matthew A. Applied Surface Science, 2000, 200(1), 172.
27 Swaddle T W. Coordination Chemistry Reviews, 2001, 219-221(0), 665.
28 Dong H, Ma Y, Wang S, et al. Rare Metal Materials and Engineering, 2018, 47(1), 249(in Chinese).
董海荣, 马颖, 王晟, 等. 稀有金属材料与工程, 2018, 47(1), 249.
29 Cheng Y, Wu X, Wu F, et al. Journal of Hunan University( Natural Sciences), 2012, 39(10), 60(in Chinese).
程英亮, 吴湘权, 伍帆, 等. 湖南大学学报(自然科学版), 2012, 39(10), 60.
30 Elaish R, Curioni M, Gowers K, et al. Electrochimica Acta, 2017, 245, 854.
31 Mu Y, Liu X, Wang L. Information Sciences, 2018, 435, 40.
32 Chang Y, Yang D, Guo Y, et al. Surface & Coatings Technology, 2018, 353, 339.
33 Pan F, Han W, Wang X, et al. Annals of the Rheumatic Diseases, 2014, 0, 1.
34 Wang Y, Wang Y, Chen P, et al. Acta Metallurgica Sinica, 2011, 47(4), 455(in Chinese).
王艳秋, 王岳, 陈派明, 等. 金属学报, 2011, 47(4), 455.
35 An L, Ma Y, Liu Y, et al. Surface & Coatings Technology, 2018, 354, 226.