合金元素Ni/Al对45Si2MnCr2Mo超高强韧钢冲击磨料磨损行为的影响

doi:10.11896/cldb.22030042

Abstract
Figure/Table
References
Related Citation (7)

Download:

Full Text ( PDF ) (14046KB)
Export: BibTeX | EndNote (RIS)

Abstract In this work, three-body abrasive wear experiments were carried out on 45Si2MnCr2Mo ultra-high strength steels with different Ni/Al contents by using the MLD-10 impact abrasive wear tester. The effects of different Ni/Al contents on the wear weight loss, the depth of hardened layer, and the microstructure of worn surface and subsurface of ultra-highstrength steel were systematically studied, and the wear mechanism was discussed. The results show that when the content of Ni was 3%, the wear resistance of ultra-high strength steel was the best, and the wear percentage was the lowest, which was only 0.391%. However, when 0.5% Al was added, the wear resistance decreased by 1.48, and the wear percentage increased to 0.42%. Therefore, the addition of Ni element can improve the wear performance, but it is not conducive to improve the wear performance when Al and Ni are added at the same time. The wear weight loss is reflected by the embedded quantity and size of abrasives, depression and spalling. After impact abrasive wear test, the surface and subsurface areas of ultra-high strength steel are strengt-hened by work hardening. When the content of Ni is 3%, the ultra-high strength steel has the best comprehensive surface hardness, hardening percentage and effective hardened layer depth, and the wear process is more uniform. The wear forms of ultra-highstrength steel are mainly furrows, spalling, cracks, embedded abrasive particles, furrow spray and extrusion accumulation.

Key words： ultra-high strength steel impact abrasive wear wear performance impact hardening

Published: Online: 2023-07-10

CLC number:

TB304

Fund:National Natural Science Foundation of China(52071012) and Central Funds Guiding the Local Science and Technology Development-Fundamental Research (YDZX2021005).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Ming
	CHEN Xiaohua
	WANG Zidong
	WANG Yanlin
	ZUO Lingli

Cite this article:

YANG Ming,CHEN Xiaohua,WANG Zidong, et al. Effect of Alloying Elements Ni/Al on Impact Abrasive Wear Behavior of 45Si2MnCr2Mo Ultra-high Strength Steel[J]. Materials Reports, 2023, 37(13): 22030042-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22030042 OR http://www.mater-rep.com/EN/Y2023/V37/I13/22030042

1 Moghaddam E G, Karimzadeh N, Varahram N, et al. Materials Science Engineering:A, 2013, 585, 422.
2 Narayanaswamy B, Hodgson P, Beladi H. Wear, 2016, 350-351, 155.
3 Zhang D, Beeley P R, Baker A J. Wear, 1994, 173, 59.
4 Lindroos M, Valtonen K, Kemppainen A, et al. Wear, 2015, 322-323, 32.
5 Ratia V, Miettunen I, Kuokkala V T. Wear, 2013, 301, 94.
6 Zeng D, Lu L, Zhang N, et al. Wear, 2016, 358-359, 62.
7 Colaco R, Vilar R. Wear, 2005, 258, 225.
8 Ding H H, He C G, Ma L, et al. Wear, 2016, 352-353, 1.
9 Chen H H. Application manual of wear resistant materials, Machinery Industry Press, China, 2012, pp. 10 (in Chinese).
陈华辉. 耐磨材料应用手册, 机械工业出版社, 2012, pp. 10.
10 Zhao S M. Preparation and wear properties of composites fabricated from surfaces reinforced with ceramic particles on high chromium cast iron basis. Master's Thesis, Central South University, China, 2012 (in Chinese).
赵散梅. 陶瓷颗粒增强高铬铸铁基表层复合材料的制备与磨损性能研究. 硕士学位论文, 中南大学, 2012.
11 Li W. China Foundry, 2003, 55(11), 1105 (in Chinese).
李卫. 铸造, 2003, 55(11), 1105.
12 Haiko O, Valtonen K, Kaijalainen A, et al. Wear, 2019, 440-441, 203098.
13 Haiko O, Miettunen I, Porter D, et al. Tribologia:Finnish Journal of Tribology, 2017, 35(1-2), 5.
14 Darvishi A, Daneshmayeh A, Salehi A, et al. Metallurgical and Materials Engineering, 2021, 27(4), 541.
15 Wang R J, Wang W, Song R B, et al. Materials Reports, 2016, 30(2), 7 (in Chinese).
王汝杰, 王威, 宋仁伯, 等. 材料导报, 2016, 30(2), 7.
16 El-Koussy R, El-Raghy S M, El-Mehairy A E. Tribology International, 1981, 14(6), 323.
17 Shukyurov R I, Mamedov Z G, Kagramanov I K. Metal Science and Heat Treatment, 1989, 31(3), 203.
18 Cheng J Q, Wang X W, Gao X M. Coal Mine Machinery, 2004(11), 75 (in Chinese).
程巨强, 王先武, 高兴明. 煤矿机械, 2004(11), 75.
19 Leiro A, Vuorinen E, Sundin K G, et al. Wear, 2013, 298-299, 42.
20 Narayanaswamy B, Hodgson P, Timokhina I, et al. Metallurgical & Materials Transactions A, 2016, 47(10), 1.
21 Zhou H L, Ding H, Sun Y F. Foundry Technology, 2014, 35(9), 2 (in Chinese).
周慧琳, 丁海, 孙玉福. 铸造技术, 2014, 35(9), 2.
22 Han C F, Lu W K, Chen T C, et al. Foundry Technology, 2018, 39(8), 4 (in Chinese).
韩成府, 路王珂, 陈天聪, 等. 铸造技术, 2018, 39(8), 4.
23 Yang M, Chen X H, Wang Z D, et al. Materials Research Express, 2022, 9(2), 026509.
24 Shi R J, Ma Y, Wang Z D, et al. Acta Materialia, 2020, 200, 686.
25 Gregory N W. Journal of the American Chemical Society, 1957, 79, 87.
26 Dyson D J, Holmes B. Journal of the Iron and Steel Institute, 1970, 208, 469.
27 Kang J, Zhang F C, Yang W X, et al. Materials Science and Enginee-ring:A, 2017, 686, 150.
28 Pei Z Z. Heat treatment process and wear resistance mechanism of bainitic and martensitic wear resistance cast steel for cone crusher liner. Ph. D. Thesis, University of Science and Technology Beijing, China, 2020 (in Chinese).
裴中正. 圆锥破碎机衬板用贝-马复相耐磨铸钢热处理工艺及耐磨机理研究. 博士学位论文, 北京科技大学, 2020.
29 Peng S G, Song R B, Sun T, et al. Wear, 2016, 362-363, 129.
30 Lu Z, Zhou Y, Rao Q, et al. Journal of Materials Processing Technology, 2001, 116, 176.
31 Feng Y F. Strengthening mechanism and impact wear behavior of aging hardening light-weight ultra-high manganese steel. Ph. D. Thesis, University of Science and Technology Beijing, China, 2020 (in Chinese).
冯一帆. 时效硬化型轻质超高锰钢的强化机理及冲击磨损行为研究. 博士学位论文, 北京科技大学, 2020.
32 Lu J, Hao Y, Kang P, et al. Wear, 2018, 414-415, 21.
33 Moghaddam P V, Rinaudo M, Hardell J, et al. Wear, 2020, 460-461, 203484.
34 Wang C Y, Li X D, Chang Y, et al. Wear, 2016, 362-363, 121.
35 Oskari H, Somani M, Porter D, et al. Wear, 2018, 400-401, 21.