铌酸钾钠压电陶瓷制备工艺研究进展

doi:10.11896/cldb.21070049

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7988KB)
Export: BibTeX | EndNote (RIS)

Abstract Piezoelectric ceramics are a class of functional ceramics that can facilitate the conversion between force and electricity. Piezoelectric ceramics are widely used in biomedical applications, sensors, ultrasonic motors and a variety of other fields. As they are lead-free, the volatilization of lead during the preparation process can be avoided, making them environment-friendly. This aspect made piezoelectric ceramics the research focus at home and abroad. Potassium sodium niobate ceramic is a typical lead-free piezoelectric ceramic with highly favorable electrical properties. However, the electrical properties are affected by the preparation technology and process. Solid-state sintering is the most mature technology for the preparation of potassium sodium niobate ceramics. The preparation of potassium sodium niobate ceramic includes threemain steps, namely, powder synthesis, compression molding, and sintering forming. The results indicate that a powder template with highly textured potassium sodium niobate ceramic can be prepared by the powder synthesis process, however, these components are not homogenous and are comprised of different degrees of soft and hard agglomerations. A simple ceramic blank can be prepared by pressing, but the quality is affected by the mold and auxiliary tool characteristics, low precision, simple structure, and secondary processing. The method is not suitable for mass production. In addition, the element volatilization caused by the high temperature in the sintering process cannot be avoided. Hence, in-depth studies on the low-temperature sintering and reduction of volatilization of sodium and potassium are highly relevant for the effective excellent preparation of potassium sodium niobate ceramics. In this paper, the state of the art of solid-state sintering technology for preparing potassium sodium niobate ceramics is presented. The three fabrication steps, namely, powder synthesis, compression molding, and sintering forming are also systematically discussed. By analyzing the advantages and disadvantages of this process, the influence mechanism of powder synthesis characteristics on the microstructural and electrical properties of potassium sodium niobate ceramics has also been discussed. This paper offers guidance for the preparation of potassium sodium niobate ceramics with highly favorable electrical properties, and also for their application in medicine and industry.

Key words： sodium potassium niobate powder synthesis pressing molding sintering

Published: 10 June 2023 Online: 2023-06-19

CLC number:

TB381

Fund:General Program of the National Natural Science Foundation of China (51775554, 52005511).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Xuewu
	ZHOU Longlong
	HUANG Yanfei
	GUO Weiling
	XING Zhiguo
	WANG Haidou
	HU Shuaibang

Cite this article:

LI Xuewu,ZHOU Longlong,HUANG Yanfei, et al. Review of Preparation Methods for Potassium Sodium Niobate Lead-free Piezoelectric Ceramics[J]. Materials Reports, 2023, 37(11): 21070049-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21070049 OR http://www.mater-rep.com/EN/Y2023/V37/I11/21070049

1 Zhao Q, Zhao J, Tan X. Materials Physics and Chemistry, 2019,1, 1.
2 Yakushev P N, Shalimov V V. Technical Physics Letters, 2020, 46(2), 182.
3 Liao Y, Wang D, Wang H, et al. Dalton Transactions, 2020, 49(4), 1311.
4 Ma Z, Li G, Sun B, et al. Journal of Materials Science, 2020, 55(6), 1.
5 Chen S T, Chee K I T, Kui Y, et al. Journal of the American Ceramic Society, 2016, 99(10), 3293.
6 Amit M, Rui P, Morgane D, et al. Langmuir, 2016,32, 5241.
7 Zhang Y, Li M, Yang S, et al. Solid State Communications, 2021,324, 114133.
8 Shi W M, Du J, Chen C, et al. Journal of Materials Science: Materials in Electronics, 2020, 31(2), 959.
9 Li H T, Yan Y F, Wang G X, et al. Acta Intraocular Lens, 2016, 45(6), 1619 (in Chinese).
李海涛, 闫焉服, 王广欣, 等.人工晶体学报, 2016, 45(6),1619.
10 Zhu H B, Yang X Y, Zhang D Q, et al. Journal of Qiqihar University (Natural Science Edition), 2012, 28(2), 41 (in Chinese).
朱厚彬, 杨秀英, 张德庆, 等.齐齐哈尔大学学报(自然科学版), 2012, 28(2), 41.
11 Xu J, Yang F M, Luo M, et al. Colloids and Polymers, 2017, 35(4), 164 (in Chinese).
徐健, 杨发明, 罗镅, 等.胶体与聚合物, 2017, 35(4), 164.
12 Li L Y,Bai W F,Zhang Y, et al. Journal of Alloys and Compounds, 2015,622, 137.
13 Venet M, Santa R W, Jean C M, et al. Journal of the European Ceramic Society, 2019,39, 3456.
14 Tao H, Yin J, Zhao C, et al. Journal of the European Ceramic Society, 2020, 41(1), 335.
15 Geng Z M. Preparation of KNN based transparent ceramics by hot pressing sintering.Master's Thesis, Changzhou University, China, 2015 (in Chinese).
耿志明.热压烧结制备KNN基透明陶瓷. 硕士学位论文, 常州大学, 2015.
16 Li J F, Wang K, Zhang B P, et al. Journal of the American Ceramic So-ciety, 2006, 89(2), 706.
17 Feizpour M, Bafrooei H B, Hayati R, et al. Ceramics International, 2014, 40(1), 871.
18 Garcia M A P, Gupta S K, Mao Y. Ceramics International, 2020, 46(2), 1352.
19 Ge H Y, Hou Y D, Yang J F, et al. Powder Technology, 2013,246, 144.
20 Liu L L, Guo Z Z. Ferroelectrics, 2018, 524(1), 189.
21 Guo Z Z, Liu L L, Yu J, et al. Piezoelectric and Acoustooptic, 2019, 41(8), 209 (in Chinese).
郭壮壮, 刘亮亮, 郁军, 等.压电与声光, 2019, 41(8), 209.
22 Li L Y, Bai W F, Zhang Y, et al. Journal of Alloys & Compounds, 2015,622, 137.
23 Li L Y, Bai W F, Zhang Y, et al. Ferroelectrics, 2016, 490(1), 85.
24 Li Y X, Li P, Wu Y Z, et al. Ceramics International, 2021, 47(2), 2180.
25 Wang H Q, Zuo R Z, Fu J, et al. Journal of Alloys and Compounds, 2011,509, 936.
26 Khorrami G H, Kompany A, Zak A K. Materials Letters, 2013, 110(1), 172.
27 Lu T. Preparation of potassium sodium niobate piezoelectric ceramic thin films by sol-gel method.Master's Thesis,Nanjing University of Aeronautics and Astronautics, China, 2014(in Chinese).
陆婷. 溶胶凝胶法制备铌酸钾钠压电陶瓷薄膜的研究. 硕士学位论文, 南京航空航天大学, 2014.
28 Hu C X, Cheng H L, Ruan X Y, et al. Journal of Baoji College of Arts and Sciences (Natural Science Edition), 2020, 40(1), 29 (in Chinese).
胡晨曦, 程花蕾, 阮晓煜, 等. 宝鸡文理学院学报(自然科学版), 2020, 40(1), 29.
29 Surmenev R A, Chernozem R V, Skirtach A G, et al. Ceramics International, 2021, 47(7), 8904.
30 Bai S, Karaki T. Journal of the American Ceramic Society, 2013, 96(8), 2515.
31 zeren Y, Ebru M A, Sedat A. Advanced Powder Technology, 2014,25, 1825.
32 Cao H Q, Lu B, You C, et al. Rare Metal Materials and Engineering, 2016, 45(S1), 337 (in Chinese).
曹慧群, 卢兵, 游诚, 等.稀有金属材料与工程, 2016, 45(S1), 337.
33 Lu Y, Karakin T, Fujii T. Ceramics International, 2015,41, 174.
34 Lou Y X, Yang Z, Jia X M, et al. Journal of Qilu University of Technology, 2019, 33(1), 8 (in Chinese).
娄有信, 杨子, 贾小敏, 等. 齐鲁工业大学学报, 2019, 33(1), 8.
35 Kumara P, Pattanaika M. Ceramics International, 2013, 39(1), 65.
36 Adamczyk-Habrajska M, Szafraniak-Wiza I, Goryczka T, et al. Materials Chemistry and Physics, 2020(242), 122451.
37 Zhu K J, Meng Z L, Qiu J H, et al. Optical Precision Engineering, 2009, 17(1), 132(in Chinese).
朱孔军, 孟兆磊, 裘进浩, 等.光学精密工程, 2009, 17(1), 132.
38 Yin Q Y, Wang C Z, Wang Y, et al. Journal of Materials Science Mate-rials in Electronics, 2018, 29(11), 9268.
39 Tong Y, Liu Y, Tian D. Journal of Anqing Normal University (Natural Science Edition), 2020, 26(4), 56 (in Chinese).
童悦, 刘永, 田冬. 安庆师范大学学报(自然科学版), 2020, 26(4), 56.
40 Zhang R Z, Guo W P, Zhao G L. Journal of Henan University of Science and Technology (Natural Science Edition), 2016, 37(6), 5 (in Chinese).
张瑞珠, 郭雯鹏, 赵高磊. 河南科技大学学报(自然科学版), 2016, 37(6), 5.
41 Choi J H, Kim J S, Han S H, et al. Ceramics International, 2014,40, 13269.
42 Li Y M, Liu Y J, Xie J, et al. Silicate Bulletin, 2015, 34(2), 303 (in Chinese).
李月明, 刘奕君, 谢俊, 等. 硅酸盐通报, 2015, 34(2), 303.
43 Liu Y J, Li Y M, Shen Z Y, et al. Acta Intraocular Lens, 2015, 44(8), 2199 (in Chinese).
刘奕君, 李月明, 沈宗洋, 等.人工晶体学报, 2015, 44(8), 2199.
44 Wang W C, Yuan X Y, Ma C Y, et al. Ceramics International, 2015, 41, 8377.
45 Chen W C, Wang F F, Yan K, et al. Ceramics International, 2019,45, 4880.
46 Chen W. Fabrication and properties of potassium sodium niobate piezoelectric scaffolds by three dimensional printing technology.Master's Thesis, South China University of Technology, China, 2017 (in Chinese).
陈威.三维打印技术制备铌酸钾钠压电支架及其性能研究. 硕士学位论文, 华南理工大学, 2017.
47 Fisher J G, Andreja B, Kosec M, et al. Journal of the American Ceramic Society, 2008, 91(5), 1503.
48 Li K, Li F L, Wang Y, et al. Materials Chemistry and Physics, 2011, 131(1-2), 320.
49 Su Y L, Chen X M, Yu Z D, et al. Journal of Materials Science, 2017, 52(5), 2934.
50 Yu Z D, Chen X M, Su Y L, et al. Journal of Materials Science, 2019, 54(21), 13457.
51 Zhen Y H, Li J F, Wang K, et al. Materials Ence & Engineering B, 2011, 176(14), 1110.
52 Bah M, Giovannelli F, Schoenstein F, et al. Ceramics International, 2014, 40(5), 7473.
53 Kuscer D, Kocjan A, Majcen M, et al. Ceramics International, 2019, 45(8), 10429.
54 Li Z X, Sun H J, Liu X F, et al. Ceramics International, 2020, 46(8), 11617.
55 Feizpour M, Bafrooei H B, Hayati R, et al. Ceramics International, 2014, 40(1), 871.
56 Li H T, Li R, Wang G X, et al. Acta Silicate Sinica, 2020, 48(9), 1396 (in Chinese).
李海涛, 李冉, 王广欣, 等. 硅酸盐学报, 2020, 48(9), 1396.
57 Bafandeha M R, Gharahkhani R, Lee J S. Materials Chemistry and Phy-sics, 2015,156, 254.
58 Jeong D Y, Lee S H, Song H C, et al. Journal-Korean Physical Society, 2011, 58(3), 663.
59 Wang W R, Cheng H L, Zhou W C. Piezoelectric and Acoustooptic, 2017, 39(2), 252 (in Chinese).
王文蕊, 程花蕾, 周万城. 压电与声光, 2017, 39(2), 252.
60 Zhang C, Ren X Y, Zhou H W, et al. Journal of Yili Normal University (Natural Science Edition), 2016, 10(3), 33 (in Chinese).
张超, 任翔云, 周恒为, 等.伊犁师范学院学报(自然科学版), 2016, 10(3), 33.
61 John G F, Dibyaranjan R, Seok M K, et al. Journal of Alloys and Compounds, 2009, 479(1-2), 467.